···
Log in / Register

How to Turn on the Passat's Air Conditioning?

4 Answers
ElleMarie
08/26/25 2:44am
To turn on the Passat's air conditioning, follow these steps: 1. Press AUTO to start/stop the air conditioning. 2. Press the A/C button to select the cooling function. The car air conditioning system, abbreviated as the car AC, refers to the system that regulates and controls the temperature, humidity, and air cleanliness within the enclosed space of a car. The functions of car air conditioning include the following: 1. Temperature regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the temperature inside the car. In winter, except for large commercial vehicles that use independent combustion heaters for heating, other vehicles generally utilize the car's residual heat for heating. 2. Humidity regulation: Humidity significantly affects the thermal comfort of passengers inside the car. The humidity inside the car should generally be maintained between 30% and 70%. Standard car air conditioning systems do not have the function to regulate humidity; this can only be achieved through ventilation systems or advanced luxury cars equipped with integrated heating and cooling air conditioners. 3. Airflow regulation: The speed and direction of airflow greatly impact passenger comfort. If the air is blowing directly, the speed should be limited to a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environment, age, health condition, and temperature preferences. 4. Air purification: The quality of air inside the car is an essential factor in ensuring comfort.
Was this review help?
2
4
Share
VanJaxon
09/08/25 2:48am
Starting the cooling air conditioning in the Passat is actually quite simple. First, start the engine and let it run for a few minutes to warm up. Then locate the air conditioning panel on the center console, which usually has buttons or knobs: press the A/C button to activate the compressor cooling function, then turn the temperature control knob to the coldest setting, such as around 18°C. Next, increase the fan speed knob or button to let the air blow out. If it's an automatic air conditioning system, you can simply press the AUTO button, and the system will automatically control the fan speed and temperature to cool the cabin. Remember to check that the air vents are not blocked and that the fan sounds normal without any strange noises, ensuring reliable cooling performance. Regularly replace the cabin air filter and maintain sufficient refrigerant levels to avoid discomfort caused by excessive heat in the summer. While driving, make sure the windows are closed for better efficiency and safety.
Was this review help?
20
1
Share
Expand All
VonChloe
10/22/25 2:49am
If you want to cool down while driving a Passat, pay attention to safety and efficiency when using the AC. First, I should remind you not to blast the AC immediately after getting in the car, especially on hot days, as it may cause discomfort. It's healthier to open the windows for ventilation for a few minutes before activating the cooling system. Operationally, after starting the engine, locate the AC control area, press the AUTO or A/C button to activate cooling, and set the temperature below 20°C for optimal comfort. Increase the fan speed to allow cool air to circulate quickly. Listen for the sound of the AC operation—normal fan humming without unusual noises indicates everything is working fine. If the cooling isn't strong enough, it might be due to a dirty filter or insufficient refrigerant, so check maintenance records to avoid malfunctions. Develop a habit of ensuring all buttons are functioning properly before starting the car, and avoid setting the temperature too low after turning on the AC to reduce energy consumption and extend the system's lifespan.
Was this review help?
19
2
Share
Expand All
DeStella
12/05/25 3:13am
To cool down in a Passat, start the engine and locate the air conditioning panel. Press the A/C button to activate the cooling function, then turn the temperature knob to the cold zone, such as 18-20°C. Adjust the fan speed button or knob to increase airflow. If there's an AUTO mode, press it for automatic adjustment, which is more convenient. You should feel cold air blowing from the vents within a few minutes. If not, check if the buttons are faulty or if the filter is clogged, affecting performance. Follow these simple steps for a comfortable and cool ride.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the wading depth of the Chang'an Benben?

The wading depth of the Chang'an Benben is approximately 40cm. Here is the relevant information: 1. Introduction: The Benben was officially launched at the Beijing Auto Show in November 2006. It is Chang'an's first independently developed brand car. The development took three years, with everything from the engine to the exterior being independently developed. The Benben continues Chang'an's practical and people-friendly approach, targeting young people as an economical hatchback. 2. Additional Information: When wading through water, ensure the engine is running normally and the steering and braking systems are responsive and reliable. Engage a low gear and drive smoothly into the water, avoiding excessive throttle or sudden acceleration to prevent water from splashing into the engine and causing it to stall.
12
2
Share

What aspects are deducted for incorrect sitting posture in Subject 3?

Subject 3 driving posture incorrect deduction reasons include: looking down at the gear, shifting too fast, staying in neutral for too long, not stepping on the accelerator in time when starting, etc. The following is relevant information about the driver's license test: 1. Introduction: The driver's test is a qualification examination held by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally drive a motor vehicle. 2. Content: The content of the motor vehicle driver's test is divided into the road traffic safety laws, regulations and related knowledge test subject (also known as the "theoretical test", referred to as "Subject 1"), the field driving skills test subject (commonly known as the "pile test", referred to as "Subject 2"), and the road driving skills and safe and civilized driving common sense test subject (commonly known as the "road test", referred to as "Subject 3"). The test content and passing standards are unified nationwide, and corresponding test items are stipulated according to different types of driving licenses.
7
5
Share

Which gear should be used for long downhill descents?

When driving downhill for a long distance, it is necessary to shift to a low gear. Below are the specific details: 1. Precautions: When descending a long slope, shift into a low gear. Avoid prolonged use of the brakes; instead, rely on the low gear and engine speed to reduce the vehicle's speed (engine braking). 2. Gear shifting notes: For manual transmission vehicles, depending on the driving conditions, you can shift into 1st or 2nd gear to use engine braking to control speed. For automatic transmission vehicles, shift into low gear (L) or, if equipped with a manual mode, switch to manual mode and shift into a low gear. Prolonged braking during a long descent should be avoided, as the braking system may overheat and lead to brake failure once the temperature reaches a certain level.
4
1
Share

What are the reasons why the Changan CS75 cannot shift gears?

The reasons why the Changan CS75 cannot shift gears include: internal failure of the gear shift lever assembly, wear of the gears inside the gear shift lever, failure of the P-gear lock solenoid valve inside the gear shift lever, failure of the brake switch, or incomplete clutch disengagement. 1. Internal failure of the gear shift lever assembly: This causes the gear shift lever to get stuck, making it difficult to move forward and backward. As a result, the gear cannot be engaged or shifting becomes difficult. 2. Failure of the P-gear lock solenoid valve inside the gear shift lever and failure of the brake switch: For safety reasons, to prevent the vehicle from accidentally shifting into other gears when starting, there is a P-gear solenoid valve. This solenoid valve needs to receive a signal from the brake pedal to release. 3. Incomplete clutch disengagement: This may be caused by failure of the clutch disc and clutch pressure plate. Generally, the clutch three-piece set (friction disc, pressure plate, and release bearing) needs to be replaced.
10
0
Share

Where is the fuel filler switch on the Changan CS75?

The fuel filler switch on the Changan CS75 is located below the left side of the driver's seat. There is a lever button that can be pulled upward to open the fuel tank cap. Below are the detailed introductions of the Changan CS75: Interior: Equipped with a three-spoke flat-bottom steering wheel, a full LCD instrument panel, an embedded central control screen, a piano black lacquer-style decorative panel on the dashboard, a yacht-style gear shift lever, and silver chrome trim around the gear shift lever. Configuration: Equipped with L2 level autonomous driving, IACC adaptive cruise control, etc. It allows remote control of the vehicle via a mobile phone, and the mobile phone Bluetooth key can replace the physical key. The front suspension uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. The multi-link suspension can improve the car's handling and passenger comfort.
9
0
Share

Which engine is used in the Changan CS75?

2020 CS75 is equipped with the Blue Core engine. Here are the relevant details: 1. Blue Core engine: It is a self-developed engine by Changan, representing domestic technology. The Blue Core engine delivers a maximum of 233 horsepower. In addition to its powerful performance, it also demonstrates low fuel consumption and was named one of the 'China Heart' Top 10 Engines in 2017. 2. Extended information: The latest Changan CS75 model is equipped with the newly developed Blue Core 1.5T turbocharged engine. It incorporates direct fuel injection technology, producing a maximum of 170 horsepower and 230 Nm of torque. Paired with an Aisin automatic transmission, the power output is smoother. The official fuel consumption is currently under 6.5L.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.