How to Turn on the Pajero Headlight Cleaning System?
3 Answers
Turn on the wiper switch while the headlights are on to activate the Pajero headlight cleaning system. Here are some precautions regarding headlight cleaning: 1. The headlight cleaning system refers to a water outlet located below the headlights, which can be used to clean dust and dirt from the headlights at any time, ensuring sufficient illumination. 2. The headlight cleaning system is mainly used in vehicles equipped with xenon headlights. This is because xenon headlights are extremely bright and can impair the vision of drivers in oncoming vehicles. Related information about headlights is as follows: 1. When overtaking or when the vehicle in front does not move after the traffic light turns green, the corresponding light signal is: flash the headlights once or twice. 2. When encountering strong headlight glare from an oncoming vehicle at night, the corresponding light signal is: flash the headlights twice. 3. To kindly remind another driver to check their vehicle's condition, the corresponding light signal is: flash the headlights three times and use the horn as an additional reminder. 4. When an oncoming vehicle or the vehicle in front changes lanes without signaling, the corresponding light signal is: flash the headlights once or twice.
To activate the Pajero's headlight washer system, the process is quite straightforward. When my Pajero is running, first turn the headlight switch to illuminate the lights—usually either low beam or high beam will work. Then, operate the windshield wiper washer lever, that small stalk on the right side of the steering wheel, by pushing it firmly forward or holding it down for about a second. Note that the headlights must be on for the washer fluid to spray. I've used it myself after off-roading in muddy conditions—when mud obscures the lights, a quick spray clears them up, ensuring safe nighttime driving. Don’t forget to regularly check if the washer fluid reservoir is filled, and use dedicated cleaning fluid to prevent nozzle clogs. If the system doesn’t respond, it might be a blown fuse or an issue with the pump motor—consult the manual or try a few more times before seeking help from a repair shop if needed.
The activation method of the Pajero's headlight cleaning system is based on vehicle sensor linkage. When the vehicle is running, turn on the headlight switch to confirm the lights are on, then push the windshield wiper lever forward, and the system will automatically activate the headlight cleaning procedure. This design considers wiper synchronization, reducing the need for multiple user operations. I have studied that the cleaning fluid is pumped through dedicated pipes to spray at the headlight covers, effectively removing dust and dirt. During daily use, it is important to check if the nozzles are clogged; wiping them with a soft cloth can prevent this. If cleaning fails, it may be due to a relay malfunction or circuit disconnection. I recommend first checking the headlight cleaning-related components in the fuse box. For safety, only test when the vehicle is stationary to avoid distraction.
