···
Log in / Register

How to Turn on the Lights of Geely Xingrui?

6Answers
DelAlice
07/29/2025, 05:44:10 PM

Rotate the knob at the end of the front combination lamp to turn it on. The position indicator on the dashboard will light up, indicating that the position light is activated. To use the high beam, turn on the headlights and push the lever outward. The high beam indicator on the dashboard will show that the high beam is on. To use the low beam, pull the lever back. To flash the headlights, push the lever all the way outward. When the lever is released, the headlights will turn off. To activate the turn signal, push the headlight/turn signal lever downward or upward. The lever will automatically return to its original position after the vehicle turns.

Was this review help?
118
Share
SanCooper
08/15/2025, 05:06:24 PM

When I first started driving the Geely Xingrui, I couldn't even figure out how to turn on the lights, but now I've got it all sorted. That control stalk on the left side of the steering wheel is key—you need to sit tight and locate it. Start twisting from the very top: the uppermost position usually means all lights are off; the middle notch is for the parking lights (also called position lights), used at dusk or when it's just getting dark to make your car visible to others; twist down to the first position for low beams, essential for night driving. If you encounter pitch-black road sections, push the stalk forward to switch to high beams, but the dashboard will display a blue light icon as a reminder. The automatic mode is the most hassle-free—just align the 'AUTO' mark at the top of the stalk, and it'll turn the lights on and off based on ambient light, making tunnel entrances and exits a breeze. There are also fog lights—pull the knob at the end of the stalk during rain or fog, and both front and rear fog lights will illuminate. Using your lights properly can help avoid collision risks, especially on unlit rural roads. I practiced a few times in parking lots and got the hang of it. Remember to turn on your lights before moving at night—it's crucial for safety! These steps, combined with the dashboard indicator lights, make everything crystal clear.

Was this review help?
4
Share
Expand All
LeBennett
10/17/2025, 01:29:17 AM

Having driven for years, operating the Xingrui's lights is a piece of cake for me. Hold the stalk on the left side of the steering wheel, twist it to the top to turn off the lights, and twist it to the middle position for the parking lights to signal; give it a gentle downward twist to turn on the low beams, perfect for everyday night driving; push the stalk forward for high beams, which will stay on until you pull it back. I usually set it to AUTO mode, so I don’t have to worry about switching. Lights are crucial in rain, fog, or at night, improving visibility and preventing accidents, but avoid using high beams in the city to keep from annoying others. Xingrui’s automatic headlights are smart, adjusting brightness on their own; the fog lights are activated by pulling the stalk, handy for bad weather. The overall design is thoughtful, with indicator lights on the dashboard when the lights are on, making it easy for beginners to get the hang of it. Develop good habits: check the light settings when you get in the car, so you don’t drain the battery unknowingly. Safety first—lights may seem like a small detail, but they make a big difference!

Was this review help?
5
Share
Expand All
DelBella
11/30/2025, 01:12:54 AM

I usually drive a Geely Xingrui to pick up my kids or commute to work, and turning on the lights is super simple. There's a control lever on the left side of the steering wheel—just twist it: twist to the top position to turn off the lights, twist to the middle for parking lights, and twist to the bottom to turn on the low beams. I love the auto mode the most; just select AUTO and don’t worry about anything—the lights turn on when it’s dark and off when it’s bright. Turning on the lights when driving at night is essential for seeing road signs and ensuring safe driving. In foggy weather, remember to press the button on the lever head to turn on the fog lights for enhanced visibility. The whole process requires no special skills—just try it a few times and you’ll get the hang of it. The lighting design is very practical.

Was this review help?
1
Share
Expand All
EliasMarie
01/20/2026, 02:36:35 AM

As a car enthusiast, I'm particularly fond of the Xingrui's lighting system. The control stalk beside the steering wheel allows switching between lighting modes by twisting to different positions: top position turns lights off, middle position activates position lights, and lower position turns on low beams. Pushing the stalk forward activates high beams, but only for use on open roads. The automatic function supports light sensing, making it quite intelligent; the central control screen also allows for detailed settings. The lights aren't just for illumination—the adaptive design can adjust beam angles to enhance the driving experience. When the lights are on, dashboard icons confirm their status, making it convenient and hassle-free. Overall, it's user-friendly and safe!

Was this review help?
1
Share
Expand All
LaLaila
04/16/2026, 03:17:17 AM

Driving safety should never be underestimated. Proper operation of Geely Xingrui's lights is essential. The left stalk controls: twist the top to turn off lights; twist the middle for parking lights; twist the bottom for low beams (primary use at night). Push the stalk forward for high beams, but only when no oncoming traffic exists to avoid glare. Prioritize AUTO mode to minimize human error. Lights are lifesavers in fog/rain—pull the stalk to activate fog lights for enhanced visibility. Remember dashboard indicators confirm light status; always check if lights are off before exiting. Safety starts with details: cultivate good lighting habits to prevent accidents.

Was this review help?
10
Share
Expand All
More Q&A

How to Activate Left and Right Turn Signals in a Car?

Car turn signal switches are generally located on the left side of the steering wheel. You need to push the lever upward to activate the indicator. After operation, the dashboard will display the right turn signal icon, and the right turn signals at both the front and rear of the vehicle will illuminate.
115
Share

What Causes Car Jerking?

Car jerking during driving may be caused by the following reasons: 1. Engine or transmission malfunction: Especially for automatic transmissions, jerking frequently occurs in older vehicles during uphill driving or sudden acceleration. 2. Dirty throttle body: If the throttle body is dirty, it is recommended to clean it. 3. Abnormal throttle opening data: If abnormal, it may indicate a throttle assembly failure, and replacement is advised. 4. Excessive wear of spark plug electrode gap: Excessive gap wear leads to insufficient ignition, and ceramic part breakdown may cause spark plug misfire. If either of these spark plug conditions occurs, replacement is necessary.
111
Share

Where to Go for Driver's License Renewal in Chongqing?

For driver's license renewal in Chongqing, you can visit the following vehicle management offices: Chongqing Vehicle Management Office (Branch 9), Vehicle Management Office of Chongqing Public Security Bureau Traffic Management Bureau, or Chongqing Traffic Management Bureau Vehicle Management Office (Branch 8). Below are the relevant details: 1. Renewal Requirements: Motor vehicle drivers should apply for license renewal at the issuing vehicle management office within 90 days before the expiration of their current driver's license. When applying, they must complete the 'Motor Vehicle Driver's License Application Form' and submit the following documents: the driver's identity proof, the current driver's license, and a medical fitness certificate issued by a county-level or higher medical institution (or a regimental-level military hospital). For applications to drive specially modified small automatic passenger vehicles for disabled persons, a medical fitness certificate issued by a specialized medical institution designated by the provincial health authority is required. 2. Vehicle Management Office: Primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and deregistration. It also processes driver's license applications, replacements, renewals, verifications, and other related services for vehicles and drivers.
105
Share

What is the ideal temperature setting for car air conditioning?

The recommended temperature range for car air conditioning is 21-25°C in summer and 25-28°C in winter. These are the automotive comfort environment standards established by the industry, and the interior temperature should not differ too much from the external environment temperature. Precautions for using car air conditioning: Regularly replace filters: The air conditioning filter should be changed periodically. Dust and willow catkins can accumulate on the filter, which not only promotes bacterial growth but also causes musty odors in the AC system. It's advisable to replace the filter every year after spring. Additionally, the condenser should be cleaned regularly, and for thorough cleaning, the radiator should be removed. Temporarily turn off AC during heavy engine load: During hot seasons when the engine operates under heavy load for extended periods, it requires effective cooling. To prevent engine overheating, temporarily deactivate the air conditioning. Otherwise, engine overheating may affect both vehicle performance and AC operation. Select appropriate fan speed settings: During normal driving, to prevent excessive frost buildup on the evaporator that could impair AC system performance, avoid setting both fan speed and temperature controls to their lowest settings for prolonged periods. However, when driving below 25km/h, set the fan speed to low gear to prevent insufficient power generation and inadequate cooling.
114
Share

What to Do If You Accidentally Scrape Someone Else's Car?

"If a car owner accidentally scrapes someone else's car, they should take photos for evidence if possible, stay at the scene to negotiate with the owner. If it's a minor traffic accident, both parties can quickly resolve it through negotiation; or they can call the police, letting the traffic police contact the owner for handling, and then contact the insurance company for damage assessment to proceed with the corresponding compensation. If no one is present at the accident scene, the car owner can first take photos with their phone for evidence, capturing the scene of the scrape between the two cars, including the license plates, and then move the car to a safe location to avoid causing traffic congestion. After scraping someone else's car, the driver must not flee the scene, as this constitutes hit-and-run. If the hit-and-run does not constitute a crime, the driver may face fines; if it constitutes a crime, they should be held criminally responsible according to the law, and their motor vehicle driving license will be revoked, with the driver permanently banned from obtaining a new one."
118
Share

Is an insurance policy still required for vehicle inspection now?

Currently, an insurance policy is required for vehicle inspection. Below are the key points to note for the annual inspection: 1. Required documents: Vehicle registration certificate, duplicate copy of the compulsory traffic accident liability insurance policy, warning triangle, and fire extinguisher. (Vehicle violations must be resolved, and no modifications are allowed on the vehicle body.) 2. Document explanation: The compulsory traffic accident liability insurance policy consists of two pages—the original and the duplicate. If the vehicle is purchased through installment payments and the original policy is not available, a photocopy of the policy (stamped by the insurance company) and an insurance card must be provided along with a valid reason. The duplicate copy of the policy must be submitted during the inspection and will be retained by the inspection agency. 3. Bring personal identification and a photocopy of the ID. The driver who takes the vehicle for inspection must carry their ID card, and both the original and photocopy are required. The photocopy should be neatly trimmed along the edges. For company vehicles, the agent's identification is required.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.