How to Turn on the High Beam in a Citroën?

1 Answers
VanLilliana
07/30/25 4:56am
To turn on the high beam in a Citroën, press the headlight switch button on the right side of the multifunction steering wheel. Taking the 2018 Citroën DS5 as an example, it is a mid-size car with body dimensions of 4530mm in length, 1871mm in width, and 1520mm in height, a wheelbase of 2727mm, a fuel tank capacity of 60 liters, and a curb weight of 1600kg. The 2018 Citroën DS5 features a MacPherson strut front suspension and a trailing arm torsion beam rear suspension. It is equipped with a 1.6T turbocharged engine, delivering a maximum horsepower of 167PS, a maximum power of 123kW, and a maximum torque of 240Nm, paired with an 8-speed automatic transmission.
Was this review help?
12
4
Share
More Forum Discussions

What is the typical fuel consumption of the CR-V in urban areas?

The actual fuel consumption in urban areas is 7.5-8.5 liters per 100km. Below are some related introductions about fuel consumption: 1. Vehicle-related reasons: As an internal control unit of the car, the oxygen sensor mainly monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the engine's air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the vehicle will emit darker exhaust from the tailpipe while driving. 2. "Three filters" not replaced for a long time: During the use of the vehicle, the three filters (oil filter, air filter, and fuel filter) must be replaced regularly. If they are not replaced for a long time, they will become dirty and affect performance, sending incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.
14
4
Share

What is the normal turbo boost pressure for Volkswagen?

For Volkswagen turbochargers, the normal pressure range is between 1.2bar and 1.5bar. The boost pressure sensor is located in front of the throttle control unit. This sensor is supplied with 5V power and ground by the engine control unit. The sensor's signal is a 0~5V voltage proportional to the pressure. Under atmospheric pressure (sea level), the voltage is approximately 2.5V. This signal is used for boost pressure regulation. Turbocharging: It is a technology that uses exhaust gases produced by the operation of an internal combustion engine (Internal-Combustion-Engine) to drive an air compressor (Air-compressor). Commonly used in automotive engines, turbochargers can increase the horsepower output of internal combustion engines by utilizing the heat and flow of exhaust gases. Types: The boosting types of turbocharging include mechanical supercharging systems, pressure wave supercharging systems, exhaust gas turbocharging systems, and compound supercharging systems.
8
0
Share

Where is the engine number located on the MG MG6?

The engine number of the MG MG6 is generally located on the left side of the engine, relatively close to the valve cover. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is unique.
11
4
Share

Should the New Sylphy Shift to N Gear at Red Lights?

Whether the New Sylphy should shift to N gear at red lights depends on the actual situation. If waiting for a long red light, it is better to shift to N gear; if waiting for a short red light, shifting to N gear is not necessary. Engage Handbrake or Step on Brake When Shifting to N Gear: After shifting to N gear, you must engage the handbrake or step on the brake. Since the car is in neutral at this time, the drive shaft has no restraining force, and any external force can affect the car's movement, especially on a slope where inertia can easily cause the car to move unexpectedly. Do Not Shift to P Gear at Red Lights: Do not shift to P gear at red lights. If a rear-end collision occurs at this time, it may cause damage to the transmission.
11
0
Share

What does DOC mean in automotive terms?

Automotive DOC stands for Diesel Oxidation Catalyst, which refers to a device installed in the exhaust system of diesel vehicles that reduces the emission of pollutants through various physical and chemical reactions. Below is relevant information: 1. Introduction: The oxygen sensor is used to detect the concentration of oxygen in the exhaust and sends feedback signals to the ECU, which then adjusts the fuel injection volume to maintain the air-fuel ratio of the mixture near the theoretical value. 2. Function: The sensor measures whether there is excess oxygen in the exhaust after engine combustion, i.e., the oxygen content, and converts this information into a voltage signal sent to the engine computer. This enables the engine to achieve closed-loop control based on the excess air factor, ensuring that the three-way catalytic converter maximizes the conversion efficiency of hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) in the exhaust, thereby optimizing the conversion and purification of emission pollutants.
2
4
Share

How to Check Tire Pressure Data on Volkswagen Cars?

Volkswagen tire pressure data is displayed in the center of the dashboard. Press the menu button below the display to view the tire pressure data for all four wheels. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually triggers an alarm when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires should be inspected and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also cause the tire pressure warning light to illuminate. In such cases, the only solution is to replace the sensor with a new one.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.