···
Log in / Register

How to turn on the headlights of the Soueast DX7?

4 Answers
SanKira
07/29/25 4:06am

The method to turn on the headlights of the Soueast DX7 is: Rotate the red arrow to the AUTO position, and the headlights will automatically turn on or off based on the ambient brightness. The Soueast DX7 is a compact SUV. Taking the Soueast DX7 2020 Xingyue DCT Luxury Edition as an example, its body dimensions are: length 4570 mm, width 1905 mm, height 1720 mm, with a wheelbase of 2700 mm and a fuel tank capacity of 50 liters. The Soueast DX7 2020 Xingyue DCT Luxury Edition is equipped with a 1.5T turbocharged engine, with a maximum power of 145 kW and a maximum power speed of 5600 rpm, paired with a 7-speed dual-clutch transmission.

Was this review help?
15
4
Share
SanEmilia
08/12/25 3:51pm

I've been driving the SouEast DX7 for two years, and the headlight switch is quite straightforward. On the left stalk behind the steering wheel, there's a round knob—the top position 'O' turns the lights off, turning it down one notch activates the parking lights (tail lights on), and the second notch turns on the low beams. To activate the high beams, push the entire stalk forward, and the blue indicator on the dashboard will light up; pulling it back temporarily flashes the high beams to alert the car ahead. For fog lights in rainy or foggy conditions, press the separate fog light button under the center console. For automatic headlights, simply turn the knob to the 'AUTO' position, and they'll turn on automatically when entering an underground garage at night. However, remember to manually turn on the low beams in rainy weather, and the fog lights need to be activated separately. Beginners are advised to start with the parking light position to practice, as it's safer than directly switching on the headlights.

Was this review help?
16
0
Share
Expand All
McGrace
10/02/25 8:34am

The headlight operation of the DX7 is similar to most SUVs, with the focus on the left-hand stalk on the steering wheel. Turn the top knob clockwise two clicks to turn on the low beams, and counterclockwise to turn off the lights. In automatic transmission models, when set to AUTO, the lights will automatically turn on in tunnels, but note that the fog lights won't activate automatically—you need to press the button with the wavy line on the center console. Last year when I was driving on mountain roads, I found that if you turn on the high beams and an oncoming car appears, pulling the left-hand stalk toward your chest quickly switches back to low beams. The dashboard will display a green headlight icon to confirm the lights are on. If they don't turn on, first check if you've twisted the knob to the wrong position. Keep a powerful flashlight in the car for emergency lighting in sudden darkness.

Was this review help?
17
0
Share
Expand All
VanAbigail
11/16/25 3:30am

Three steps to turn on the headlights of DX7: First, locate the light lever on the lower left side of the steering wheel, rotate the switch knob to the second position to turn on the low beam; push the lever to switch to high beam; to turn on the fog lights, press the button on the center console separately. If you have purchased a mid-to-high trim with automatic headlight function, align the knob with the AUTO mark, and the lights will automatically turn on when the light dims, which is suitable for owners who frequently drive on highways. One thing to note: If the headlights are on when starting the vehicle, the increased load on the generator may affect the idle speed, so it's best to turn on the lights after the engine is running. The light lever may become stiff after prolonged use; regularly spraying some WD-40 lubricant can extend its lifespan.

Was this review help?
15
2
Share
Expand All
More Forum Discussions

What is a Crankcase?

The crankcase is the lower part of the cylinder block where the crankshaft is installed, divided into the upper crankcase and the lower crankcase. The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also referred to as the oil pan. Components of the Crankcase: The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also referred to as the oil pan. The oil pan bears minimal stress and is typically made from stamped thin steel sheets. Its shape depends on the overall engine layout and the capacity of the engine oil. Functions of the Crankcase: The oil pan is equipped with an oil stabilizer baffle to prevent excessive oil surface fluctuations when the vehicle is jolted. Additionally, the bottom of the oil pan is fitted with a drain plug, which usually contains a permanent magnet to attract metal particles from the lubricating oil, thereby reducing engine wear. A gasket is installed between the joint surfaces of the upper and lower crankcases to prevent lubricating oil leakage.
7
5
Share

What are the key points for driving on curves?

Curve driving techniques are as follows: Align the vehicle before entering: Before entering an S-curve, try to align the vehicle straight. When you see the angle between the left A-pillar and the lower edge of the windshield align with the left edge of the road, it indicates the vehicle is in the middle of the S-lane. Determine the steering timing: Observe the first node of the windshield wiper. When this node reaches the right edge line, turn left one full rotation. Then, slightly adjust the steering to keep this node on the edge line. Maintain this position while driving. When the first node of the wiper reaches the left edge line, straighten the steering wheel. Drive with the steering wheel straightened: Continue driving with the steering wheel straightened. When the second node of the wiper reaches the left edge line, turn right one full rotation. Similarly, slightly adjust the steering to keep the second node on the edge line and maintain this position while driving slowly.
14
2
Share

What are the reasons for crossing the line when turning right during curve driving?

Curve driving right turn crossing the line may be caused by incorrect steering timing, misjudgment of vehicle trend, and other reasons. Incorrect steering timing: When turning, failing to observe the reference point and steer in time, or not grasping the right timing, can cause the car to veer too far to the right and cross the line. Misjudgment of vehicle trend: Lack of vehicle sense and incorrect judgment of the vehicle's movement trend can lead to crossing the line. Curve driving test techniques: In principle, try to take a wider path after entering the curve; when in the curve, use the steering wheel to keep the small rearview mirror on the inner side of the hood always at the edge of the outer white line (specifically, not crossing the line or staying too far from the edge line), and straighten the direction at the end of the S-curve. Avoid using the brake, especially emergency braking.
18
0
Share

What does the white zigzag line mean?

White zigzag lines are distance confirmation lines. There are three types of distance confirmation lines: white zigzag distance confirmation lines, white semicircular distance confirmation lines, and highway distance confirmation markings. White zigzag distance confirmation lines: The total width of white zigzag distance confirmation lines is 300 cm, with line widths of 40 cm or 45 cm. Starting from the base point at 0 meters, a line is set every 5 meters, with two lines forming a group, spaced 50 meters apart. Five groups are typically repeated, though more may be set depending on site conditions. White semicircular distance confirmation lines: White semicircular distance confirmation lines have a hemisphere radius of 30 cm and are spaced 50 meters apart, usually set continuously over a certain section of the road. Highway distance confirmation markings: These markings are used in conjunction with distance confirmation signs and are placed in sections where overtaking is common, accidents are frequent, or other needs arise. The purpose of highway distance confirmation markings is to remind drivers to maintain a safe following distance when they see these markings, thereby preventing traffic accidents.
15
4
Share

What Causes the Engine Light to Illuminate While Driving?

When the engine light illuminates while driving, it could be due to engine knocking, among other reasons. The causes and solutions are as follows: Detailed Causes: The vehicle's warning light typically illuminates due to issues with the fuel emission system; poor engine combustion state; engine knocking; poor fuel quality; dirty engine cylinder interiors with carbon deposits; the computer's inability to retrieve engine data; or false faults. Solutions for Engine Warning Light Illumination: Promptly inspect the condition of the car's engine; check the status of the vehicle's sensors, including the air flow sensor and spark plug components; inspect for any knocking in the engine; and examine the ignition coil for faults.
10
1
Share

Where is the engine number of a new energy vehicle?

New energy vehicle engine numbers are stamped on the cylinder block of the engine, typically on both sides at the rear of the block. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle driving license contains the engine number, usually located on the second last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, each engine can only have one engine number and each engine's number is unique.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.