How to Turn on the Fog Lights on Ora Black Cat?

1 Answers
MollyAnn
07/28/25 8:41pm
First, sit in the driver's seat and insert the car key. You will notice that the vehicle's light control lever is located next to the steering wheel. The fog light switch is located on the light control lever. Rotate the left knob to the "O" position to turn off the vehicle's fog lights. The upper position activates the vehicle's front fog lights, while the lower position activates the rear fog lights. The use of fog lights should be combined with other lighting functions. If either the front or rear fog lights do not illuminate, it indicates that the bulb has burned out and must be replaced.
Was this review help?
13
1
Share
More Forum Discussions

Will points be deducted for not turning on headlights at night?

Points will be deducted for not turning on headlights at night. According to the Road Traffic Safety Law, driving a motor vehicle without using lights as required will result in a warning or a fine, with 1 point deducted. When driving at night on roads without streetlights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, the vehicle must turn on its headlights, clearance lights, and tail lights. When passing sharp curves, slopes, arched bridges, pedestrian crossings, or intersections without traffic signal control at night, the vehicle should alternately use high and low beams to signal. Methods for correctly using lights at night: 1. Regardless of whether there are streetlights on the road, always turn on the low beams, clearance lights, and tail lights first to make the vehicle visible to others; 2. When turning or making a U-turn, always use the left and right turn signals correctly, activating the corresponding turn signal before changing direction.
5
4
Share

How to proceed with vehicle preservation process?

Here is an introduction to the vehicle preservation process: 1. First step: After the concerned party preserves the responsible party's vehicle, they must file a lawsuit or apply for a ruling within thirty days of taking the preservation measures. If no action is taken, the court will lift the preservation measures. 2. Second step: After the People's Court accepts the application, it must make a ruling within forty-eight hours; if the ruling is to take preservation measures, execution must begin immediately. 3. Third step: If the applicant does not file a lawsuit or apply for arbitration in accordance with the law within thirty days after the People's Court takes preservation measures, the People's Court shall lift the preservation.
15
4
Share

How to Set the Horn Sound When Locking the Hyundai Elantra?

The method to set the horn sound when locking the Hyundai Elantra is to select the lock option in the car's onboard computer settings and click "lock on" to enable the horn sound function when locking. Below is some related information about the Hyundai Elantra: 1. Introduction: Similar to the older version of the Elantra, the Hyundai Elantra still uses 1.6L and 1.8L engines, but they have been recalibrated. With a dynamic and elegant appearance, the Elantra combines the latest European design elements, and its simple, crisp overall lines outline the vehicle's stylish and sophisticated characteristics. 2. Exterior: The waistline is one of the Elantra's distinctive exterior features. The smooth, slender wave-like waistline fully showcases the Elantra's agile nature, enhancing the elegant and sophisticated visual appeal of the side body. The integrated rear bumper blends seamlessly with the lines of the taillights, setting a strong and powerful visual tone for the overall rear effect.
12
5
Share

What are the effects of a car being exposed to the sun?

The effects of a car being exposed to the sun are as follows: 1. The engine is prone to problems: In a high-temperature environment, the heat dissipation temperature difference of the engine cooling system is small, and the heat dissipation ability is poor, making the engine prone to overheating. 2. The oil system is prone to problems: Under high temperatures, the fuel and corresponding components may experience a series of issues, accelerating component wear and severely affecting the engine's lifespan. 3. The battery may experience unstable voltage under high temperatures: When the battery temperature is high, the electrodes may oxidize due to the aging of the insulation layer, especially the negative electrode, which may produce white oxide at the terminal, leading to unstable battery voltage. 4. High temperatures can cause changes in the car paint: Car paint exposed to the scorching sun may fade or lose its gloss, similar to human skin, and may even develop cracks. 5. Interior aging: The car interior is prone to aging under high temperatures.
1
0
Share

How to Quickly Contact the Owner When Your Car is Frequently Blocked?

Here are methods to quickly contact the car owner: 1. Call 114: Inform 114 that you need to locate a car owner. 114 will transfer you to a special hotline where you can provide details such as the license plate number, color, model, etc. The hotline will then connect you with the owner via phone, asking them to move their car. The entire process takes less than three minutes to locate the owner. 2. Call 110 or 122: In fact, 110 will eventually redirect you to 122. Since 122 is the traffic management department's hotline for handling public traffic incidents in China, if your car is blocked, you can report the license plate number, model, color, and other relevant details. Based on this information, the traffic police will contact the car owner. If the car is found to be in violation of regulations, a tow truck may be called to remove it. This is the best and most effective method.
15
1
Share

How to Deal with Clutch Not Disengaging?

When it comes to clutch failure, it's best to go to a professional repair shop for inspection as soon as possible. Here is some relevant information about clutches: 1. Definition: The clutch is installed between the engine and the transmission, and it is the assembly component in the automotive drivetrain that directly connects to the engine. Typically, the clutch is installed together with the engine crankshaft's flywheel group, serving as the component that cuts off and transmits power between the engine and the automotive drivetrain. 2. Classification: According to the "China Clutch Manufacturing Industry Production and Sales Demand and Investment Forecast Analysis Report," clutches are divided into four types: electromagnetic clutches, magnetic particle clutches, friction clutches, and hydraulic clutches.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.