···
Log in / Register

How to Set Up Automatic Locking for Mitsubishi Eclipse Cross?

4Answers
Lee
07/24/2025, 02:31:25 AM

Turn on the ignition without starting the engine, press and hold the lock button for about 10 seconds until you hear a beep inside the car or see the hazard lights flash twice. Then, turn off the power and start the engine to complete the setup. Below is an introduction to the Eclipse Cross: 1. The Eclipse Cross is equipped with a 1.5T turbocharged gasoline engine, delivering a maximum power of 125kW (170PS) and a peak torque of 250N·m. It is paired with a CVT continuously variable transmission. 2. The front face of the Eclipse Cross adopts Mitsubishi's latest "Dynamic-Shield" design language, featuring a youthful appearance. Two C-shaped chrome trim pieces surround the headlight contours and extend to the lower part of the bumper. Combined with sharp headlights and large front fog lights, it creates a strong visual impact. The same-color bumper and large chrome grille, along with the integrated LED headlights, give it a stylish and bold look. The unique fastback design on the side enhances the sporty feel, while the rear incorporates many avant-garde elements. The distinctive taillights are positioned between the upper and lower rear windshields, making it stand out. 3. For the interior, the Eclipse Cross features a new design style. The three-spoke steering wheel is surrounded by piano black trim, and the center console area has a strong sense of layering with plenty of chrome accents. Standard configurations include a multifunction steering wheel, an 8-inch floating touchscreen (with CarPlay), a multimedia control knob, independent sliding and reclining adjustments for the second-row seats, automatic air conditioning, and an air purifier. Higher trim levels add features like a panoramic sunroof, keyless entry and start, electronic parking brake, HUD display, and heated leather seats, offering practical and convenient features.

Was this review help?
105
Share
CamilaLee
08/10/2025, 08:16:43 PM

Last time when I was driving the Eclipse Cross, I was also looking for this feature. Later I found that the auto-lock while driving is actually quite simple. After starting the ignition, shift the gear to D, but don't step on the accelerator at this moment, then press and hold the central locking button for more than 5 seconds until you hear a beep, which means the setting is successful. This feature is quite practical, especially when going out with kids, as the auto-lock when the speed exceeds 15km/h can prevent accidental door opening. However, please note that there might be differences across model years. I've tried this method on a 2018 model and it worked, but I'm not sure about other years, so it's recommended to check the manual for confirmation. Also, remember that after locking, you need to open the door from the inside twice to unlock it—a thoughtful safety design.

Was this review help?
1
Share
Expand All
ColinAnn
09/24/2025, 03:46:14 AM

When it comes to the auto-locking setup, here's my experience with the Eclipse Cross: Turn the key to the ON position without starting the engine, then simultaneously press both the central locking and unlocking buttons for about ten seconds to activate the function. The first time I tried, I didn't quite get the button positions right and ended up pressing the window switches instead of the lock button, wasting a good amount of time. Once set up successfully, the doors automatically lock every time the speed exceeds 20 km/h, which is especially handy when making temporary stops by the roadside on rainy days, eliminating worries about passengers accidentally touching the door handles. By the way, some higher-end models even allow you to configure this through the dashboard computer, making the operation more intuitive and convenient.

Was this review help?
1
Share
Expand All
Gomes
05/09/2026, 03:49:39 AM

When I first started driving the Eclipse Cross, I was also puzzled about how to set the auto-lock. I figured out a simple method: with the vehicle powered on, open the driver's side door, then press and hold the lock button for more than 5 seconds, and observe the response from the door light or hazard lights. It felt really rewarding once I got it right, especially for families with kids. Once, on the way to dropping off my child at school, the little one was fiddling with the door handle, and the auto-lock intervened just in time. A reminder here: if the central control buttons aren't responsive, it might be due to poor contact in the wiring, and the plugs need to be checked.

Was this review help?
14
Share
Expand All
More Q&A

What is the fuel consumption of the Prado 4.0?

The fuel consumption of the Prado 4.0 is 7-10L/100km. However, the actual fuel consumption should be based on real-world usage, as many factors can affect it, such as driving conditions and driving habits. Here are some methods to reduce fuel consumption: Slow acceleration: When starting the vehicle, use a low gear and gently press the accelerator to gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can significantly increase fuel consumption. Gentle acceleration not only shortens the engine warm-up time but also improves fuel efficiency, thereby saving fuel. Regular tire checks: Ensure the tire pressure is correct. The pressure should not be too high or too low, as both can increase fuel consumption. Regularly check the tire pressure to avoid affecting driving fuel consumption. Also, check if the steering wheel and tires are properly aligned. Misalignment can lead to increased fuel consumption.
105
Share

How many points are deducted for driving on a pedestrian crossing?

Driving on a pedestrian crossing generally does not result in point deductions but may incur corresponding fines. If you do not run a red light and do not cross the line while driving on the pedestrian crossing, and the vehicle does not move further, no points will be deducted. Below is relevant information about driving on pedestrian crossings: Legal basis for driving on pedestrian crossings: According to Article 90 of the 'Road Traffic Safety Law of the People's Republic of China,' if a motor vehicle driver violates the road traffic safety laws and regulations regarding road passage, they shall be given a warning or fined. If there are other provisions in this law, penalties shall be imposed in accordance with those provisions. Driving on a pedestrian crossing without running a red light: If you do not run a red light and do not cross the line while driving on the pedestrian crossing, and the vehicle does not move further, no points will be deducted. If the vehicle just crosses the stop line when the light is red but stops immediately, this action will not be penalized. However, if there is obvious movement after crossing the line, penalties will apply. This situation is considered as stopping beyond the line. According to Article 4, Item 5 of the 'Scoring Standards for Road Traffic Safety Violations,' failing to drive or stop as required at an intersection will result in a deduction of 2 points.
109
Share

What is the Audi A4L driver assistance system?

Audi A4L driver assistance system is the high beam assist system. The function of the high beam assist system: The high beam assist system can maximize the duration of high beam activation when driving in the dark, thereby improving visibility. This reduces the driver's burden, allowing them to focus more on observing traffic conditions. The operation logic of the high beam assist system: The activation and deactivation of the high beam assist system, the driver's cancellation of the system's function, manual switching on and off of the high beams, and the operation of the headlight flash (momentary high beam) signal are all achieved by two position changes of the high beam lever—lightly pushing the lever forward or pulling it backward.
114
Share

How often should the fuel filter of Volkswagen CC be replaced?

The fuel filter of Volkswagen CC must be replaced every 30,000 kilometers under normal usage conditions. Definition of fuel filter: It filters impurities in the vehicle's fuel. Depending on the type of fuel, it can be categorized into gasoline filters and diesel filters. It is a type of wear-and-tear part that requires regular cleaning and replacement. Impact of inferior fuel filters: Poor filtration performance. After prolonged immersion in engine oil, the filter element's filtration layer may detach, blocking the fuel line and causing insufficient fuel pressure, which prevents the vehicle from starting. Additionally, it can lead to abnormal fuel system pressure, directly resulting in insufficient engine power or incomplete combustion, damaging expensive components such as the catalytic converter and oxygen sensors, and causing significant economic losses.
115
Share

Is it good to touch up paint on a golden car?

Golden car paint may show color discrepancies when repaired at general shops. For the best results, it's recommended to go to a 4S shop or a highly professional paint repair institution. Below is the relevant introduction: Composition of car paint: Vehicle paint is generally composed of four layers: the electrophoretic layer, the intermediate coat layer, the color paint layer, and the clear coat layer. Consequences of touch-up paint: General car paint scratches usually appear on the clear coat layer and can be removed through polishing. However, frequent polishing is not advisable as it reduces the thickness of the clear coat layer, leading to dull car paint. If there is severe scraping that damages the color paint layer, touch-up paint is required. After touch-up paint at general paint shops, color discrepancies may appear during future use.
119
Share

What Type of Engine Oil is Best for Turbocharged Engines?

Turbocharged engines are recommended to use fully synthetic engine oil. The maintenance methods for turbocharged engines are as follows: 1. Avoid driving without warming up the engine. Especially in winter, let the engine idle for a period of time to allow the lubricating oil to fully lubricate the bearings before the turbocharger rotor operates at high speed. Therefore, do not rev the engine aggressively immediately after starting to prevent damage to the turbocharger oil seal. 2. Do not shut off the engine immediately. After prolonged high-speed operation, let the engine idle for 3-5 minutes before shutting it off. During engine operation, some engine oil is supplied to lubricate the turbocharger rotor bearings and for cooling. If the engine is suddenly stopped, the oil pressure will drop rapidly to zero. 3. The high temperature from the turbocharger turbine section transfers to the center, and the heat in the bearing housing cannot be dissipated quickly. Meanwhile, the turbocharger rotor continues to spin at high speed due to inertia. If the engine is suddenly stopped while hot, the trapped oil in the turbocharger may overheat, damaging the bearings and shaft.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.