How to Turn on the Fog Lights of Nissan Teana?

2 Answers
BrielleFitz
07/25/25 2:02pm
Teana fog light switch is located on the left side of the steering wheel at the light control lever, twist it to turn on the fog lights. The steps to remove the fog lights are as follows: 1. Take out a flat-head screwdriver, first pry from the reverse side of the fog light grille to release the clips inside, then the gap on the front side will be larger, use the flat-head screwdriver to gradually pry the clips securing the grille to the front bumper. After all clips are released, the fog light grille can be removed. Note: pry slowly and gently to avoid breaking the plastic clips; 2. The fog lights fixed on the front bumper can be seen, and it will be observed that the fog lights are secured by two screws. Take out a T25 spline wrench and use it to remove these two screws. Keep the removed screws properly for reinstallation; 3. After the screws are removed, the two claws of the fog light are inserted into the clip holes on the front bumper. Hold the side where the screws were removed with your hand, then gently pull upwards to detach the fog light.
Was this review help?
1
1
Share
DiAmir
08/11/25 8:58pm
I remember when I first started driving the Nissan Teana, figuring out how to turn on the fog lights took a bit of摸索. Now I've got it down pat. First, start the car—either just powering it on or starting the engine works. Then locate the light control stalk on the left side of the steering wheel; it usually has a round knob that can be twisted or pulled. Typically, turning it to the position with the fog light symbol will activate the front fog lights, while the rear fog lights might require operating a separate switch or button. Once turned on, a small light icon will illuminate on the dashboard as confirmation. Newer Teana models might feature touchscreen controls, but most older versions still use the manual stalk. Using them in foggy conditions or heavy rain is crucial—they help illuminate the road and reduce accidents. Just don’t use them unnecessarily in clear weather; it can dazzle other drivers and is against regulations. Over my years of driving, I’ve found that if the fog lights don’t come on, it’s often due to a burnt-out bulb, requiring a trip to the shop for a replacement—so don’t skimp on日常保养. Bottom line: safety first, only use them when needed.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the displacement of the Nissan Patrol?

Nissan Patrol has a displacement of 5.6L. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. The body dimensions of the Nissan Patrol are: length 5164mm, width 1999mm, height 1955mm, with a wheelbase of 3074mm, minimum ground clearance of 287mm, and a fuel tank capacity of 100L. The Nissan Patrol is equipped with a 5.6L naturally aspirated engine, delivering a maximum power of 293 kilowatts and a maximum torque of 555 Newton-meters, paired with a 7-speed automatic manual transmission. It features double-wishbone independent suspension for both front and rear suspension types.
7
3
Share

What are the function keys of the 9th generation Accord?

9th generation Accord function keys are described as follows: 1. Electronic Stability Program (ESP): Effectively prevents body skidding, fishtailing, and other loss of control situations. It is generally not recommended for drivers to manually turn it off. 2. Hazard Warning Lights (commonly known as hazard lights): Used to warn surrounding vehicles to prevent rear-end collisions. 3. Parking Radar/Image: The central control screen displays the reversing image, and the radar will sound an alarm when detecting nearby obstacles. 4. Auto Hold: When stopping at traffic lights, after releasing the brake pedal, the auto hold function locks the wheels, relieving the driver's foot fatigue.
15
5
Share

How to Replace Brake Pads for an Electronic Parking Brake in a Car?

To replace the brake pads for an electronic parking brake in a car, follow these steps: 1. Use a jack to lift the front part of the car; 2. Remove the tire using appropriate tools; 3. Unscrew the caliper bolts, take out the damaged brake pads, and replace them. The electronic parking brake is an electronic parking brake system that integrates temporary braking during driving with long-term parking braking, controlled electronically to achieve parking braking. The working principle of an electronic parking brake in a car is: 1. Parking is achieved through the friction between the brake shoes and the brake drum or between the friction pads and the brake disc; 2. The control method replaces manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the Electronically Controlled Mechanical Parking Brake System.
5
1
Share

What Causes Steering Wheel Shaking When Braking?

The reasons for steering wheel shaking when braking are: 1. Worn or loose half-shaft tie rod ball joints or detached rubber bushings at the connection points; 2. Vehicle transmission system malfunction; 3. Tire deformation; 4. Improper tire balance; 5. Twisted or deformed drive shaft, or loose/dry/rusted universal joints; 6. Uneven brake discs; 7. Overly loose or tight power steering belt. The function of the steering wheel is to convert the force applied by the driver on the wheel's edge into torque, which is then transmitted to the steering shaft. The steering intermediate shaft serves as a connecting component between the steering gear and steering shaft, facilitating steering gear standardization while compensating for manufacturing and installation errors, ensuring proper installation of the steering gear and wheel in the vehicle.
17
4
Share

What does Ferrari's three major components mean?

Ferrari's three major components refer to the five-star wheel hubs, lift system, and LED. Taking the 2019 Ferrari 488 as an example, it is a 2-door, 2-seater hardtop convertible with body dimensions of 4605mm in length, 1975mm in width, and 1206mm in height, a wheelbase of 2650mm, and a fuel tank capacity of 78 liters. The 2019 Ferrari 488 is equipped with a 3.9T twin-turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 530 kW and a maximum torque of 770 Nm. It features a mid-engine, rear-wheel-drive layout, with a double-wishbone front suspension and a multi-link independent rear suspension.
5
1
Share

How to Use the Air Conditioning's Internal and External Circulation in a Car?

Here's how to use the air conditioning's internal and external circulation in a car: 1. Use internal circulation when driving in the city; 2. Close the external circulation to block outside airflow when encountering dusty roads; 3. Use internal circulation in traffic jams and external circulation at high speeds; 4. The use of internal and external circulation should be combined with the air conditioning and heating system; 5. Use external circulation during long-distance driving to allow fresh outside air into the cabin, preventing low oxygen levels inside; 6. Turn off the fan and open the external circulation when the temperature is high to maintain cabin temperature while getting fresh air; 7. Set the air conditioning to internal circulation mode in the summer.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.