How to Turn on the Cooling Function in Qoros 3 Air Conditioning?

[SerenityMarie]

The air conditioning system of the Qoros 3 can be operated and controlled through the vehicle's air conditioning panel. The location of the air conditioning panel is in front of the gear shift lever. To activate the cooling function in this car, the following steps are involved: 1. Simply press the A/C button on the air conditioning panel to turn the cooling mode on and off. Under certain weather conditions, if the cooling operation mode is turned off, the air will not be cooled or dehumidified. 2. Press the AUTO button directly. In the automatic operation mode, the system will ensure a stable temperature inside the car based on the external thermometer. The air temperature, air volume, and airflow distribution are automatically adjusted.

[Pedro]

Using the air conditioning in the Qoros 3 is actually quite simple. I use this feature frequently during my daily commute. First, start the vehicle and let the engine run for a while. Then locate the air conditioning control panel near the dashboard - there's usually an A/C button, press it to activate the AC system. Next, turn the temperature adjustment knob to the blue zone or lower temperature setting, around 18°C for example. Adjust the fan speed using the fan control button - I recommend starting with higher speed and reducing it after the cabin cools down. You may need to press the mode button to select face or foot ventilation direction. Remember, in summer it's better to open windows for ventilation for a few minutes before turning on the AC, as this cools the cabin faster. Regular inspection of the cabin air filter is also important - a dirty filter affects cooling efficiency. I typically replace mine every six months.

[Marilyn]

I've been driving for over a decade, and the air conditioning operation in the Qoros 3 is very intuitive. After starting the car, locate the AC buttons on the center console near the steering wheel, and press the A/C switch until the indicator light comes on. Then, rotate the temperature control knob to the low temperature position and adjust the fan speed using the plus and minus buttons. The cooling effectiveness also depends on the condition of the AC system. If it doesn't feel cold enough, it might be due to insufficient refrigerant or compressor issues, so it's advisable to have it checked at a 4S shop. Regular maintenance, such as cleaning dust from the vents, can improve efficiency. Even in winter when the AC isn't in use, it's good to turn it on for a few minutes occasionally to prevent mold. For safety, avoid adjusting settings while driving with the AC on; it's best to do so when parked.

[SilasAnn]

As a new driver, I just learned how to turn on the cooling function of the Qoros 3's air conditioning. After starting the vehicle, press the A/C button on the center console to activate the AC, then turn the temperature knob to the lowest setting and adjust the fan speed to a higher level. Selecting the face vent mode will provide the fastest cooling. The whole process takes just one or two minutes—don't worry about it being complicated. Remember to close the windows before turning on the AC for better cooling efficiency. If the car is too hot, switch to external circulation for a few minutes before changing to internal circulation.

[McAnthony]

The air conditioning cooling principle relies on the compressor's operation, and the Qoros 3's operation is very straightforward. After starting the car, press the A/C button to activate the system, set the temperature below 18 degrees, and adjust the fan speed to a moderate level. The cooling effect depends on the refrigerant cycle. If it doesn't feel cool, check for refrigerant leaks or a clogged filter. It is recommended to perform annual air conditioning maintenance, including cleaning the pipes. Ensure the vehicle is stable when operating, and avoid adjusting settings on bumpy roads.