How to Turn on the Air Conditioning in the Baojun 360?

What is the reason for the flashing snowflake and S on the Citroen transmission fault?

Citroen dashboard flashing S and snowflake reasons are as follows: 1. Temperature: Outdoor temperature is too low. 2. Damage: Outdoor temperature sensor is damaged. 3. Signal: Signal transmission error. Relevant information is as follows: 1. Tires: The entire body unreservedly showcases performance and sportiness. Front tire specifications are 245/35R21, rear tire specifications are 295/35R21, with a tire speed rating of V, capable of reaching 300 kilometers per hour. 2. Dimensions: The Citroen GT also expresses power and strength through its massive body size, measuring 4960 mm in length, 2080 mm in width, and 1090 mm in height.

12

1

Share

What are the hidden features of the 2019 Lavida Start?

Lavida hidden features: sporty needle turn signal changes from 3 flashes to 5 flashes when locking, horn sounds when unlocking, brake lights on the same side light up when opening the door, all four tail lights illuminate when braking, tail lights alternately flash when turning, dashboard displays refueling amount and navigation compass direction (requires a navigation host to use), one-touch window roll-up when locking, sunroof turns off when the engine is off, and window controls remain active when the door is open. Below is an introduction to the 2019 Lavida Start: 1. Safety features: The 2019 Lavida launched the new Start edition, which includes the Trendline and Comfortline models, both meeting the China VI emission standards. In terms of safety features, the Comfortline adds front side airbags, while tire pressure monitoring and brake assist are consistent across both models. 2. Configurations: As for other configurations, the Comfortline includes additional features such as cruise control, electric sunroof, and a multifunction steering wheel, which are quite helpful for daily driving. It’s worth noting that the Comfortline also offers optional touchscreen infotainment and Bluetooth/hands-free calling, allowing buyers to compare and choose accordingly.

9

3

Share

How to Reset the Oil Service for Maxus G50?

To reset the oil service for Maxus G50, first turn on the vehicle's ignition switch, rotate the knob on the steering switch to view the maintenance information on the dashboard, then turn off the ignition switch. Turn the ignition switch back on, adjust to display the maintenance information, press and hold the 'set' button for three seconds, and repeat this process five times. The vehicle's maintenance will then be reset. Below is a detailed introduction to the Maxus G50: 1. SAIC Maxus's new MPV, the G50, will adopt the C2B 2.0 customization model. The launch edition is equipped with a central control touchscreen with voice recognition, leather seats, cruise control, rear independent air conditioning, and a 12V power supply + USB interface. 2. In terms of safety features, the launch edition of the Maxus G50 comes with front and side airbags for the driver and front passenger, first and second-row curtain airbags, ESC (ABS+EBD), and tire pressure monitoring. It has a monocoque body and also includes ISOFIX child seat interfaces for the second and third rows. The Maxus G50 offers five seating configurations: 2+3 (5 seats), 2+2+2 (6 seats), 2+2+3 (7 seats), 2+3+2 (7 seats), and 2+3+3 (8 seats). 3. The launch edition of the Maxus G50 measures 4825*1825*1778 mm in length, width, and height, with a wheelbase of 2800 mm. It features a dome-style panoramic sunroof. In terms of powertrain, the new vehicle will be equipped with either a 1.3T or 1.5T engine, with maximum power outputs of 120 kW and 124 kW respectively, and peak torques of 230 N·m and 250 N·m. Transmission options include a 6-speed manual (1.3T) or a 7-speed dual-clutch transmission (1.5T).

11

5

Share

What is the LOR button on the car used for?

The LOR button on the door is the electric mirror adjustment switch knob. Turning it to the L position adjusts the direction of the left mirror, turning it to the R position adjusts the direction of the right mirror, and turning it to the O position turns off the electric mirror adjustment. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, side, and lower parts of the car while seated in the driver's seat. Rearview mirrors are classified by installation location: 1. Interior rearview mirror: The interior rearview mirror is designed to allow the driver to confirm the rear view without significantly changing the forward line of sight while driving. 2. Exterior rearview mirror: Passenger cars generally mount the exterior rearview mirror on the door. In Japan, some vehicles also mount them on the fenders. 3. Underview mirror: The underview mirror enables the driver to see areas outside the front and rear wheels under the car body through the mirror directly in front of the driver's seat. This helps the driver see if there are people or obstacles near the front and rear wheels or beside the car when reversing or starting forward, thereby avoiding injury to people or damage to objects and the vehicle.

7

1

Share

How to Check the Front of the Car When Exiting a Parallel Parking Space?

To gauge the distance between the front of your car and the vehicle in front, you can visually estimate by observing how much of the rear of the front vehicle is obscured by your car's front. Here are some key points about exiting a parallel parking space: 1. Deduction Points: Pressing the left wheel against the line during parallel parking will result in a 10-point deduction. According to the 'Content and Methods of Motor Vehicle Driver Tests,' the following criteria apply to parallel parking: If the vehicle stops outside the line after entering the parking space, it is considered a failure. Stopping midway is also a failure. If the tires touch the lane boundary line while moving, a 10-point deduction is applied. 2. Precautions: Drive forward to an appropriate distance and prepare to reverse. Position your car roughly level with the vehicle in front of the parking space, maintaining a lateral distance of about 1 meter. Adjust the rearview mirror angle downward until you can see the right wheel clearly, preparing for the reversing maneuver.

17

1

Share

How to Handle Steering During Turns?

Methods for handling steering during turns: 1. For gentle turns, steer early and slowly, and return early and slowly; 2. For sharp turns, steer late and quickly, and return early and quickly; 3. When making a left turn on a narrow road, steer when the right front corner of the car aligns with the roadside. On a wide road, you can steer slightly earlier; 4. When making a right turn on a narrow road, steer when the left front corner of the car aligns with the roadside. On a wide road, you can steer slightly earlier. During turns, be careful not to scrape the right side or let the rear wheels leave the road surface, and pay attention to the inner wheel difference. When turning right, avoid entering the opposite lane. Straighten the car in advance and do not cross the double yellow line. When turning left, go slightly beyond to avoid stopping on the central double yellow line. Drive slowly during turns and avoid steering too abruptly to prevent excessive centrifugal force from causing the car to skid.

16

1

Share

How to Turn on the Air Conditioning in the Baojun 360?

What is the reason for the flashing snowflake and S on the Citroen transmission fault?

What are the hidden features of the 2019 Lavida Start?

How to Reset the Oil Service for Maxus G50?

What is the LOR button on the car used for?

How to Check the Front of the Car When Exiting a Parallel Parking Space?

How to Handle Steering During Turns?

How to Maintain the Buick Verano?

How to Duplicate a Key?

How to Deal with Frost on Windows?

How to Handle Driving During Traffic Restrictions?