How to Turn on the Air Conditioning Cooling in Haval M6?

[McMadison]

First, you need to press the brake pedal to start the engine. Then, turn the key to the ST position to start the engine until the idle speed stabilizes. Rotate the fan speed knob to the far right for maximum airflow. Turn the temperature mode knob to the left to activate the cooling mode. Press the A/C switch to turn on the compressor, creating optimal working conditions for the driver and ensuring the ventilation system plays a crucial role in safe driving.

[GabrielaMarie]

To activate the air conditioning cooling function in the Haval M6, I recommend the following steps: Start the vehicle engine or press the power button to turn on the ignition, ensuring the engine is running normally. The air conditioning controls are usually located on the center console—find the round temperature adjustment knob and rotate it to set the temperature to the lowest point, typically marked in blue or below 20°C. Then press the AUTO button; the automatic mode will blow cold air and adjust the fan speed accordingly. For manual control, press the fan button to increase airflow for a more noticeable cooling effect. Using recirculation mode can help cool the cabin faster. Don’t forget to check the cleanliness of the air filter—a dirty filter can slow down cooling and increase fuel consumption. Avoid prolonged idling with the AC on; after a few minutes, close the windows or switch to fresh air mode to prevent excessive dryness inside the car. As a beginner, I’ve tried this several times—just operate it right after starting, especially on scorching summer days.

[StFelix]

Turning on the air conditioning cooling in the Haval M6 is quite simple: First, start the engine or power on the vehicle, then turn the temperature knob directly to the coldest setting, and press the AUTO button—the AC will start working automatically, with the fan speed adjusting based on your settings. I use this method daily while driving, and manually adjusting the fan speed is also convenient—just press the fan icon to increase airflow for faster cooling. Cooling efficiency depends on the weather; I recommend opening the windows to release heat before starting the AC, which saves time and fuel. For long-term use, regularly check the cooling system to avoid refrigerant leaks that may lead to weak airflow. During routine maintenance, I have the filters and pipes inspected to prevent AC malfunctions.

[DelEmiliano]

When operating the Haval M6 air conditioning for cooling, I do it this way: After starting the vehicle, locate the air conditioning button area on the center console, turn the knob to lower the temperature to the blue zone, and press AUTO to start blowing cold air. The manual mode is also simple—just press the fan speed button to increase the airflow for faster cooling. I usually prefer using the recirculation mode when cooling to prevent hot air from mixing in, and then switch to fresh air mode once the cabin is cool to maintain air circulation. If the cooling becomes slow after prolonged use, it's time to clean the filter—I typically check it every quarter.