···
Log in / Register

How to Turn on the Air Conditioning Cooling in Chery Ant?

6Answers
SanPreston
07/29/2025, 11:53:47 AM

You need to press the brake pedal to start the engine. Turn the key to the ST position to start the engine until the idle speed stabilizes. Turn the fan speed knob to the far right for maximum airflow. Rotate the cold/hot mode knob to the left to activate the cooling mode. Press the A/C button to turn on the compressor. Press the interior circulation button to activate the recirculation mode. The car's air conditioning control area can be found in the center of the dashboard. The "A/C" button in the air conditioning control area activates the cooling function.

Was this review help?
114
Share
DallasFitz
08/14/2025, 11:45:22 PM

To operate the air conditioning, first step on the brake and press the start button to power on the vehicle. Locate the physical button with a snowflake symbol near the driver's side on the center console and press it directly to activate cooling. At this point, a blue snowflake icon will light up on the center display, and cool air will immediately flow from the vents. Adjust the temperature using the large rotary knob on the left—for summer, setting it around 22 degrees is recommended for optimal comfort. Control the fan speed with the plus and minus buttons marked with a fan symbol. For rapid cooling, remember to direct the vents toward yourself.

Was this review help?
4
Share
Expand All
SanJuliet
10/12/2025, 12:29:21 AM

After driving the Little Ant for three years, I found a trick to make its air conditioning cool down super fast. First, press the AC button to turn on the compressor, then light up the recirculation button (the icon shows two arrows in a circle) to prevent hot air from outside. Set the fan speed to level 4 or higher and turn the temperature knob all the way to the left to the LO position—you'll feel the chill within 10 seconds. If you don't mind the noise, you can also roll down the windows to let out the hot air first, then close them once the cabin cools down to save more energy.

Was this review help?
16
Share
Expand All
Crystal
11/25/2025, 12:32:38 AM

We girls who drive the Little Ant like to add some practical accessories. It's recommended to buy a phone holder and clip it next to the air vent, so you don't have to look down for the temperature knob while driving. Using a sunshade is especially important—I always put up the silver reflective one when parking, and the interior temperature can be more than ten degrees lower than without it. In summer, when wearing shorts, be careful not to let the air vent blow directly on your knees, which can cause discomfort. You can adjust the middle vent blades upward to avoid this.

Was this review help?
20
Share
Expand All
McKeegan
01/15/2026, 02:04:36 AM

Simplest 3-step operation: 1. Start the vehicle 2. Press the blue snowflake AC button on the left side of the center console 3. Rotate the left dial with temperature markings. For automatic AC versions, it's even easier - just press the AUTO button and wait for cool air. If cooling is poor, first check the cabin air filter (replaceable by opening the glove box). Also, blocked condenser in the front black grille by willow catkins can cause poor cooling - simply rinse it with a water gun during car wash.

Was this review help?
20
Share
Expand All
VanTaylor
04/11/2026, 04:41:41 AM

When I first picked up the new car, I noticed the air conditioning cooled slowly, but later figured out the tricks. Holding the unlock button on the key fob for three seconds opens the windows in advance to dissipate heat; selecting the AC option when remotely starting via the APP ensures the car is cool upon entry. The key is using the MAX button (snowflake with MAX label) to force maximum cooling power for five minutes, which is twice as fast as manual adjustment. Running the AC while charging drains the battery somewhat quickly, so it's advisable not to use it for extended periods when the remaining range is below 100 kilometers.

Was this review help?
11
Share
Expand All
More Q&A

How to Turn On the High and Low Beams of the Tayron?

The method to turn on the high and low beams of the Tayron is: 1. The light switch is a lever type, located on the left side of the steering wheel. Rotate the switch handle to the high beam position to turn on the high beams; 2. Rotate to the low beam position to turn on the low beams; 3. Pull the lever to activate the flashing function, which can warn other vehicles, and it will automatically return to its original position when released. The Tayron is a premium German mid-size SUV launched by FAW-Volkswagen. In terms of body dimensions, the car measures 4595mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm. The vehicle is equipped with an EA888 2.0T turbocharged engine and features a DQ500 seven-speed wet dual-clutch transmission.
108
Share

How many colors does the Tacqua have?

The Tacqua comes in 7 colors: Tacqua Red, Turquoise Green, Flame Orange, Slate Gray, Lake Baikal Blue, Polar White, and Magic Yellow. The Tacqua is a compact SUV under the Volkswagen brand, with body dimensions of 4194 mm in length, 1760 mm in width, and 1601 mm in height, and a wheelbase of 2651 mm. In terms of power, the Tacqua is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. The 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm, reaching its peak power output at 5000 to 6000 rpm.
107
Share

What are the requirements for a license plate lottery?

The requirements for participating in the license plate lottery are: 1. Possession of a valid motor vehicle driver's license; 2. Residency in the city; 3. No existing quota under the applicant's name; 4. No quota obtained within the past two years; 5. For non-local residents, possession of a valid temporary residence permit in the city and continuous payment of social insurance and personal income tax for more than five years. License plates, commonly referred to as vehicle tags, are plates affixed to the front and rear of a vehicle, typically made of aluminum, sheet metal, plastic, or paper, displaying the vehicle's registration number, registration region, and other relevant information. The purpose of a license plate is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the plate number.
118
Share

How often should the brake pads on an Accord be replaced?

The brake pads on an Accord should be replaced after driving more than 30,000 kilometers, and there is no fixed replacement interval. The Accord brake pads use Ferodo FDB4673D, and the specific model depends on the vehicle version. Brake pads, also known as brake linings, are critical safety components in a car's braking system and play a decisive role. Taking the 2021 Accord Starry Sky Limited Edition as an example, this car has a length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. The 2021 Accord Starry Sky Limited Edition is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 194ps, a maximum power of 143kw, a maximum torque of 260nm, and is paired with a continuously variable transmission.
111
Share

Where is the cabin air filter located in a 2012 Nissan X-Trail?

The cabin air filter in a 2012 Nissan X-Trail is located on the right side of the driver's accelerator pedal. You need to open a cover panel on the lower left side of the center console. Be careful not to break the 4 clips behind the cover panel. Once the panel is removed, you can see the cabin air filter. The cabin air filter, commonly known as the pollen filter, is used to filter the air entering the cabin from outside, improving air cleanliness. Taking the 2021 Nissan X-Trail Fashion Edition as an example, this model is positioned as a compact SUV. In terms of body dimensions, the car measures 4675mm in length, 1820mm in width, and 1722mm in height, with a wheelbase of 2706mm. The 2021 Nissan X-Trail Fashion Edition is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 111 kW and a maximum torque of 194 N·m.
107
Share

What Causes the Clicking Sound When Turning the Steering Wheel to Full Lock?

The reasons for the clicking sound when turning the steering wheel to full lock are: 1. Failure of the plane bearing or top rubber mount; 2. Malfunction of the clock spring (spiral cable) inside the steering wheel. Solutions for the clicking sound when turning the steering wheel to full lock include: 1. Promptly replacing the power steering fluid; 2. Timely replacement of the steering gear. The abnormal noise when the steering wheel is turned to full lock is related to the hydraulic fluid and the working process of the hydraulic power steering system. The engine provides power to the power steering pump, which then supplies hydraulic assistance to the steering gear. The power for the steering system comes from the hydraulic fluid. If the hydraulic fluid becomes dirty or deteriorates, the formed oil film cannot meet normal working strength, and the deteriorated fluid's lubricating performance decreases, leading to increased friction between metal components.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.