···
Log in / Register

How to Turn Off the Rear Wiper on the Teramont?

6Answers
McAubrey
07/29/2025, 12:00:32 PM

Briefly turn the ignition on and off, then push the wiper control lever downward to the intermittent wiping position to enter maintenance mode. Lift the wiper arm away from the windshield. Press and hold the square unlock button at the connection point between the wiper arm and the wiper blade, then pull the wiper blade upward to remove it.

Was this review help?
108
Share
Rodney
08/15/2025, 12:06:31 AM

I've been driving the Touareg for two years, and the design of the rear wiper is indeed a bit hidden! Look to the left of the steering wheel at the lever that controls the front and rear wipers. There's a rotatable knob at the end. Turning it clockwise once activates a single swipe of the rear wiper, and turning it all the way clockwise triggers rear washer fluid + continuous wiping. To turn it off completely, just twist it counterclockwise back to its original position—at this point, the marker line on the knob should align with the 'OFF' position. By the way, the automatic mode is especially handy in summer; it wipes automatically when rain is detected. Just remember to turn it off when washing the car, or the wipers might move unexpectedly.

Was this review help?
13
Share
Expand All
OThomas
10/12/2025, 01:10:02 AM

Last time when teaching my wife how to use the car, we encountered this issue too. The rear wiper switch of the Touareg is hidden on the front wiper lever: the knob at the top of the left-hand stalk controls the rear window. Turning it counterclockwise once activates wiping without washing, and turning it all the way down activates washing. To turn it off, just twist it clockwise back to the middle until you hear a click, similar to the feel of adjusting a volume knob. Remember to turn it off before winter snowfalls, otherwise, the wiper frozen to the glass may burn out the motor if forced to start.

Was this review help?
12
Share
Expand All
Emily
11/25/2025, 01:13:16 AM

Simple three steps: 1. Locate the stalk behind the left side of the steering wheel. 2. Feel the textured knob at the end of the stalk with your fingers. 3. Turn it clockwise to the end (you'll hear a click sound). The rear wiper switch logic of the Touareg is the same as other Volkswagen models, like the Tiguan L, which operates the same way. When opening the trunk, be careful not to let large items squeeze the wiper arm.

Was this review help?
17
Share
Expand All
Bill
01/15/2026, 02:45:13 AM

This is a common question among new car owners. Focus on the black knob at the top of the wiper stalk: OFF is at the top position, turning down to INT is intermittent wiping, and further down is continuous wiping. The key to turning it off is to rotate the knob back to the initial position; you'll feel a sudden decrease in resistance, which indicates the OFF position. If you accidentally trigger the windshield washer fluid, press the MENU button on the center console to access the vehicle settings and turn off the automatic rain-sensing wiper function.

Was this review help?
15
Share
Expand All
DelGenevieve
04/11/2026, 10:29:02 PM

When I first got the car, I pondered for quite a while! Pushing the left lever downward activates the front wipers, while controlling the rear window requires rotating the small ring at the top of the lever. Here's a tip: when the rear wiper icon appears on the dashboard, it means it's on. To turn it off, rotate the knob counterclockwise until the icon disappears, approximately 60 degrees. Avoid using continuous wipe mode on highways, as the rear window tends to accumulate dust and may scratch the glass.

Was this review help?
19
Share
Expand All
More Q&A

Are green license plates exempt from traffic restrictions?

Green license plates are not subject to local traffic restrictions. Traffic restriction rules for green license plate new energy vehicles: In most cities or regions, new energy vehicles are not subject to traffic restrictions. New energy vehicles refer to vehicles with green new energy license plates. New energy vehicles that can use green license plates are pure electric vehicles and plug-in hybrid vehicles. Ordinary hybrid vehicles cannot use new energy license plates. Requirements for new energy vehicle license plate numbering: New energy vehicle license plate numbers have one additional digit compared to ordinary vehicle license plates. The number of digits in new energy vehicle license plate numbers has increased from 5 to 6, expanding the capacity of license plate numbers and enriching resources. The encoding rules are more scientific and reasonable, meeting the numbering requirements of "less use of letters and more use of numbers".
117
Share

Tips for Opening Headlight Housings with Cold Glue

Use a utility knife to make several firm cuts along the perimeter, then slowly pry with a flathead screwdriver, focusing on the bottom of the headlight. After cutting, use a heat gun to blow around the entire circumference. Ensure heating to a specific temperature and avoid localized heating; instead, use an oven for uniform heating.
117
Share

What to Do When a Car is Flooded in an Underground Garage?

First, report to the insurance company to inquire about the claims process. Disconnect the vehicle's power and have it towed to a repair facility. Once at the repair facility, conduct a comprehensive disassembly inspection, cleaning, and drying process, including checking the fuel system.
112
Share

How to adjust the time on Hyundai ix35?

First, turn off the radio by pressing the power button. Press and hold the SETUP button on the right side; this button is used for time settings. After opening the time setting page, the default setting is for "hours." Rotate the button on the right to adjust the "hours." Then press the button again to switch to "minutes," and rotate the button to adjust the "minutes." Continue rotating the knob to adjust the minutes. After adjusting the minutes, press the knob again to confirm.
112
Share

What are the steps to resolve Hyundai P0650 fault code?

Before clearing the P0650 fault code, the power supply should be turned on, but the engine should not be started. Then wait for the computer to enter the initialization state. Before reading the code, visually inspect whether the connections of mechanical components related to the electronic control system are detached, leaking, or blocked. Disconnect the ECU backup power fuse for more than 20 seconds. Remove the negative ground terminal of the battery for more than 20 seconds. Use a diagnostic scanner to read the data stream and clear the fault codes.
114
Share

How to Force Start a Hyundai ix35?

Do not press the brake pedal. First press the start button once, then press and hold it for 15 seconds on the second press to start the vehicle. Insert the remote control into the center floating armrest box. The Beijing Hyundai IX35 keyless start models have a backup ignition lock designed inside the center armrest box. You can insert the mechanical key from the remote to manually start the ignition, then replace the remote's battery or have it repaired.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.