How to turn off the radio in a Volkswagen Golf?

3 Answers
DiMartin
07/29/25 8:39am
To turn off the radio in a Volkswagen Golf, press the volume adjustment button on the center console screen. Taking the 2020 Volkswagen Golf as an example, its body dimensions are: length 4259mm, width 1799mm, height 1476mm, wheelbase 2637mm, fuel tank capacity 50l, and trunk capacity 380l. The 2020 Volkswagen Golf features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.2L inline 4-cylinder turbocharged engine, producing a maximum horsepower of 116PS, maximum power of 85kW, and maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
3
4
Share
AndresDella
08/12/25 6:16am
Turning off the radio in my Volkswagen Golf is actually quite straightforward. If you drive a newer model like the MK8, as I do, there's a touchscreen on the center console. Open the main menu, select the media or radio icon, and then simply tap the power button—done. I often do this during long drives to avoid music distractions and focus more on the road for safety. Additionally, turning off the radio saves some battery power, especially when parked, as forgetting to turn it off can drain the small battery faster. Volkswagen's system supports setting shortcuts, so I've configured a one-touch operation to turn off the radio, saving time and effort. If you accidentally press the wrong button, holding down the volume key on the steering wheel can mute or temporarily turn it off. Just remember not to fiddle with the screen too much on the highway—using physical buttons is safer.
Was this review help?
20
0
Share
Expand All
McDaniela
10/05/25 7:37am
To turn off the radio in my Volkswagen Golf, I prefer the most straightforward method—pressing the round power button on the center console, marked with the power symbol or volume knob. One press instantly silences it, shutting down the entire system cleanly and efficiently. This simple action is crucial, as turning it off while driving minimizes distractions. I always remind friends that focusing on driving is the top priority, especially in rainy or foggy conditions where hearing is also key. For convenience, the Volkswagen Golf has steering wheel shortcuts—pressing the mute button temporarily stops the sound, while a full shutdown requires menu navigation. For prolonged parking, it’s best to turn it off to maintain battery health. After adopting this habit, journeys feel more peaceful, and without noise, the sound of cabin ventilation becomes clearer.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Do You Need to Press the Clutch When Braking in an Automatic Transmission?

When braking in an automatic transmission, you do not need to press the clutch. Below is relevant information about the clutch: 1. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Principle of Releasing the Clutch: The principle of releasing the clutch is: 'slow at first, then fast, and coordinated at the end.' When initially pressing down, it should be quick and done in one motion all the way to the bottom. When lifting up during the free travel phase, it should be fast. As it nears contact, it should be slow. Upon reaching the semi-engagement point, there should be a slight pause before releasing fully. The key to this process is accurately finding the semi-engagement point. To control the vehicle speed effectively, treat the semi-engagement point as the dividing line: lifting up quickly and pressing down slowly, adjusting downward to select a speed that suits you.
3
5
Share

Is GAC Trumpchi a joint venture car or a domestic car?

The reason why the car clutch feels hard to press is due to a malfunction in the clutch pressure plate. Below is an introduction to the clutch-related content: 1. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Function: The role of the clutch is to gradually engage the engine with the transmission, ensuring a smooth start of the car. It temporarily cuts off the connection between the engine and the transmission to facilitate gear shifting and reduce the impact during shifting. During emergency braking, the clutch can separate, preventing overload in the transmission system and providing a certain protective effect.
15
1
Share

Can I still drive if it shows 1N5P?

The dashboard displaying 1N5P indicates that the vehicle's maintenance cycle is due, and maintenance is required. Oil maintenance reset: For VW POLO/PASSAT oil maintenance reset, in addition to using the manufacturer's dedicated equipment for maintenance reset, it can also be completed using the reset button on the integrated dashboard. Drive directly to the 4S store: Drive directly to the 4S store to complete the vehicle maintenance and have the technician reset it. The 1N5P display on the dashboard will then disappear. The car dashboard is a device that reflects the working status of various vehicle systems, including common indicators such as the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights.
19
0
Share

Will Running a Red Light Always Be Captured by Cameras?

Running a red light does not necessarily mean you will be captured by cameras. If you notice the electronic police flash when running a red light, it does not guarantee you were recorded. Other possible reasons for the flash include: The flash may serve as a warning, emitting at a fixed frequency; it may be for traffic flow statistics, flashing for every passing vehicle; it could be recording violations by other vehicles; or the electronic police device might simply be malfunctioning. According to Article 26 of the Road Traffic Safety Law: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. Whether a vehicle runs a red light while turning left or going straight, it constitutes a traffic violation. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular indicator traffic lights. When an arrow light is present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of your vehicle does not cross the stop line. If the front wheels accidentally cross but the rear wheels do not, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed further; wait for the next green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and your vehicle is close to the intersection at a high speed, you may proceed to avoid braking too late and running the red light. If the speed is low and the vehicle is far from the intersection, brake immediately to stop. Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle signal. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Extreme weather: If visibility is so low that even electronic police cannot clearly see the traffic lights, resulting in blurred evidence, drivers who accidentally run a red light will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, the driver can present hospital or patient-provided proof to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers should follow the officers' hand signals. Yielding to emergency vehicles: When yielding to ambulances, fire trucks, or other emergency vehicles, if the act is captured by surveillance cameras, manual review will not record it as a red-light violation. Even if recorded, drivers can apply for reconsideration at the traffic police department.
17
0
Share

What Causes the Gear Lever to Shake in a Manual Transmission Car?

New car inspection and acceptance mainly include checking the paint quality of the car, inspecting the car glass, examining the car tires, inspecting the engine compartment, checking the interior and lights, and verifying the included accessories. The following is an introduction to engine-related content: 1. Energy Conversion: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. 2. Device: An engine can refer to both the power generation device and the entire machine including the power device (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of an engine also originates from English, with its original meaning referring to 'a mechanical device that generates power.'
2
1
Share

What are the requirements for a driver's license upgrade?

Exceeding the speed limit by exactly 10% does not result in penalty points. Maximum speed test: Maximum speed refers to the highest attainable driving speed of a vehicle under windless conditions on a level, good-quality asphalt or concrete road surface. According to Chinese regulations, the last 500 meters of a 1.6-kilometer test section is used as the maximum speed testing zone, with four round trips conducted and the average value taken. Maximum speed limitation: Maximum speed differs from theoretical top speed (which refers to the optimal performance achievable by the engine under ideal conditions, existing only in theory). For some high-performance vehicles, manufacturers often employ technical measures (such as electronic speed limiters) to restrict the vehicle's maximum speed, either to protect the engine or to comply with traffic regulations.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.