How to Turn Off the Radio in a Bora Car?

How to Replace the Key Battery for the New Mercedes-Benz Viano 3.0?

From the tail end of the key, push the marked switch upwards, and the hidden mechanical key will pop out slightly. Then, you can remove the mechanical key. Use the extracted mechanical key to press against the marked position, apply a gentle force, and the key shell will open. After removing the key shell, you will find the battery positioned quite deep. Insert any tool into the gaps on both sides and gently pry to remove the old battery. When installing the new battery, ensure the positive and negative poles are correctly aligned.

7

5

Share

How to Reduce Fuel Consumption in a New Car?

Gentle and smooth driving is the most fuel-efficient. During the initial acceleration phase, avoid slamming the accelerator. The correct method is to accelerate smoothly. When idling, the engine consumes significantly more fuel than during normal driving. Therefore, if the vehicle remains stationary for an extended period, such as when waiting for someone, it is best to turn off the engine. The most fuel-efficient speed is 88.5 kilometers per hour. When the speed increases to 105 kilometers per hour, fuel consumption rises by 15%.

13

5

Share

How to Adjust the Tie Rod for Leftward Drifting?

Adjust the front and rear distance and angle to ensure the main parameters of the seat are fully adjusted to a reasonable position before proceeding to the steering wheel adjustment process. Only the front and rear distance and angle can be adjusted. The steering wheel angle will change accordingly. The specific criterion for determining whether the adjustment is accurate is to naturally sit in the driving position and slowly place one hand on the steering wheel.

5

Share

What are the PRNDL gears in a car?

The P gear in a car is the parking gear, the R gear is the reverse gear, the N gear is the neutral gear, the D gear is the drive gear, and the L gear is the low gear. Depending on the driving condition, it is necessary to shift to the correct gear to enable the car to transition to the desired driving state. Detailed introduction to each gear in the car PRNDL: P is the parking gear, which uses a mechanical device to lock the rotating parts of the car, preventing it from moving. When parking, the gear lever must be shifted into the P position, thereby locking the output shaft through the internal parking brake mechanism of the transmission and tightening the hand brake to prevent the car from moving. R is the reverse gear, used when reversing. Usually, you need to press the safety button on the lever to move it to the R gear. It is important to note: when the vehicle has not completely stopped, you must not shift to the R gear, otherwise the transmission will be severely damaged. The N gear is the neutral gear, which can be used when starting, towing, or temporarily stopping. To prevent the car from rolling on a slope, always apply the brake when in neutral. D is the drive gear, also known as the forward gear. The transmission will automatically shift between gears 1 to 4 based on speed and throttle conditions. This gear is used for normal road driving. L is the low gear, used when going downhill or on long slopes. It restricts the car to the lowest gear, allowing the engine's power to assist in braking when descending.

9

4

Share

How to Temporarily Remove Torque Limitation?

Torque limitation cannot be temporarily removed unless the fault causing the limitation is resolved. When encountering such a situation, car owners should drive to the nearest repair shop for inspection and repair. After a vehicle fault occurs, the onboard computer will generate a fault code. The onboard computers in vehicles are generally very intelligent. If a certain fault could potentially damage the engine, the computer will limit the engine's power output to protect it.

14

5

Share

How to Sell My Own Car?

Before selling your car, make sure to improve its condition. Repair any damage if possible, as this can help you get a better price. List your car on the Guazi used car platform. Typically, Guazi professionals will assess the car's condition and provide a price estimate. After that, you just need to wait for potential buyers. You can also sell your car directly to a specialized used car market. Most cities have dealerships that deal with used car transactions. Some auto repair shops also purchase used cars. You can inquire at nearby repair shops, as they often have contacts with used car buyers.

16

4

Share

How to Turn Off the Radio in a Bora Car?

How to Replace the Key Battery for the New Mercedes-Benz Viano 3.0?

How to Reduce Fuel Consumption in a New Car?

How to Adjust the Tie Rod for Leftward Drifting?

What are the PRNDL gears in a car?

How to Temporarily Remove Torque Limitation?

How to Sell My Own Car?

What to Do If Your New Energy Vehicle Runs Out of Power Mid-Journey?

How Often Should Carbon Deposits Be Cleaned?

What is the transfer process for new energy vehicles?

How to Set Up the Auto Hold Function in the New Camry?