How to Turn Off the Headlights of a BMW 5 Series?

2 Answers
BrielleAnn
07/28/25 8:55pm
The method to turn off the headlights of a BMW 5 Series is: 1. The daytime running lights can be turned on or off in the settings; 2. For the headlights, simply set them to auto. The models of the BMW 5 Series include: BMW 525Li, BMW 525LiM, BMW 530LiM, BMW 530Li, BMW 530Li xDrive, etc. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized car with body dimensions of: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. The 2021 BMW 525Li is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184PS, a maximum torque of 290Nm, and a maximum power of 135kW.
Was this review help?
14
2
Share
LeGavin
08/12/25 1:37am
I used to drive a BMW 5 Series, and turning off the headlights was actually quite simple. When driving, I usually look for a knob on the left side of the steering wheel with a light icon. I just turn it to the 'O' position, and the headlights turn off. However, it's important to note that the BMW 5 Series system is very smart with its automatic features—it turns the lights on by itself when it gets dark at night. But during the day, when manually turning them off, make sure the knob is fully turned to the correct position to avoid wasting battery or affecting other drivers. Whenever I park, I always double-check out of habit—it's safe and hassle-free. These details make me feel that the headlight system is thoughtfully designed, with smooth operation that takes just a few seconds to turn off each time.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Can You Continue Driving When the EPC Light Is On?

If the EPC light is on but there are no obvious signs of malfunction, the vehicle can still be driven. The driver may try turning the engine off and restarting it to make the EPC light turn off. Even if there are no noticeable issues, it is important to have the vehicle inspected and repaired promptly. EPC stands for Electronic Power Control, and faults indicated by the EPC light are relatively common in vehicle maintenance. If this light comes on, it may indicate a potential issue within the electronic throttle system. Reasons for the EPC light turning on include: 1. Intake system faults, such as leaks or blockages; 2. Dirty or carbon-fouled throttle body; 3. Use of substandard fuel; 4. Abnormal cylinder pressure or poor engine performance; 5. Intermittent faults or false alarms; 6. Valve issues, such as sticking or carbon buildup; 7. ECU (Engine Control Unit) malfunction.
7
3
Share

What are the basic techniques for dent repair?

The basic techniques for dent repair are as follows: Rinse the dent: First, rinse the dent area to be repaired with water. Suction cup hook: Use a paint repair sponge soaked in water to wipe away residue left by collisions (such as paint, etc.). Ordinary car cleaning cloths cannot remove internal residue from collision scratches, so a paint repair sponge must be used, which also has a certain polishing function through continuous wiping. Attach the suction cup hook to the center of the dent and pull outward with moderate force (be careful not to use excessive force) (exercise caution with dents that have caused obvious block-like cracking of the paint, as pulling too hard may remove the entire paint layer). Change positions: Continuously adjust the position of the suction cup to restore the dent as perfectly as possible.
5
2
Share

Can You Buy Display Cars from 4S Stores?

Display cars from 4S stores are available for purchase. Below is relevant information about 4S stores: Introduction: A 4S store, officially known as an automobile sales service 4S store, is a car dealership that integrates four key functions: vehicle sales, spare parts, after-sales service, and information feedback. Services: The core competitiveness of 4S stores lies in winning customers through high-quality services. At these stores, consumers can access all value-added services including vehicle information, market trends, after-sales support, maintenance guidelines, and genuine parts supply. Both complete vehicles and components are guaranteed to be original manufacturer products, eliminating consumer concerns about after-sales service, repairs, and maintenance.
11
0
Share

Can I Get 50 Yuan Worth of Gas at a Gas Station?

You can get 50 yuan worth of gas at a gas station. For small cars or even large trucks, the fuel tank can typically hold several hundred yuan worth of fuel. Gas stations do not impose a minimum spending requirement, meaning there is no regulation on the minimum amount you must purchase. Additional relevant information is as follows: Gasoline Grades: When refueling, it's important not only to choose a reputable gas station but also to select the appropriate gasoline grade. Using an unsuitable grade can lead to increased fuel consumption and reduced engine performance. Gasoline Types: Some vehicles require 92-octane gasoline, while others need 95-octane or 98-octane. The primary difference between these grades lies in their octane ratings, with minimal variations otherwise. Higher-octane gasoline has better anti-knock properties.
1
0
Share

What are the differences between the new and old models of the Liexing?

The differences between the new and old models of the Liexing mainly lie in the configuration and appearance. Configuration: The 2020 Liexing 125 retains the original configuration while incorporating a more advanced and practical keyless ignition system. This system can be considered a high-tech feature for current high-end scooters, enabling truly keyless driving and enhancing anti-theft performance. Appearance: The 2020 Liexing 125 has adjusted the graphics and enriched the color schemes, making the vehicle look more youthful and sportier compared to the older models.
5
5
Share

Why Does the Fuel Nozzle Keep Tripping?

Fuel nozzles frequently tripping during refueling is generally caused by high air pressure, excessive fueling speed, or convoluted fuel pipe structure. High air pressure: Hot weather leads to increased air pressure inside the fuel tank, making fuel prone to splashing out during refueling, which triggers the automatic tripping of the fuel nozzle. Excessive fueling speed: Relatively fast fueling speed causes fuel splashing, leading to nozzle tripping. When the fuel level reaches the pipe opening, the fueling breather circuit gets blocked by fuel, causing fuel to accumulate in the fueling pipe. Convoluted fuel pipe structure: Overly twisted fuel pipe structures in the fuel tank can easily cause fuel spray and nozzle tripping. Welding issues after blow-molding of fueling pipes - while blow-molded products generally have good stability, welding often results in material overflow or misalignment, leading to narrow fuel flow channels.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.