···
Log in / Register

How to Turn Off the Eco Mode in Camry?

3 Answers
ReidFitz
07/29/25 11:00pm
Turn off the Camry's engine and press the confirm button on the steering wheel. This calculates the optimal fuel injection amount for the engine to operate. Enter the menu settings interface on the dashboard, where you can see the eco mode. This mode is designed to reduce the vehicle's fuel consumption level. Press both the up and down buttons on the multifunction steering wheel simultaneously. The onboard computer then adjusts the automatic transmission gear, engine speed, vehicle speed, braking system, etc. This will turn off the eco mode. The working principle of the eco energy-saving mode is during the vehicle's movement.
Was this review help?
12
4
Share
LaLorenzo
08/16/25 12:50am
I've turned off the ECO mode on my Camry a few times, and it's a pretty straightforward process. Usually, you'll find a small button labeled "ECO" near the left side of the steering wheel or around the center console—just press it to deactivate. If there's no button, after starting the car, go into the dashboard settings menu, look for "Vehicle Settings" or "Drive Mode," and select the normal mode. ECO mode is Toyota's fuel-saving feature that limits throttle response and reduces air conditioning power to save gas, but it can make the car feel sluggish, especially when climbing hills or in stop-and-go traffic. After turning it off, I noticed smoother acceleration, with slightly higher fuel consumption but much better performance. Just a heads-up: menu locations might vary by Camry model year, so if you're unsure, check the owner's manual or ask at the dealership to ensure safe operation. I usually keep ECO on for city driving to save fuel, but I turn it off on highways or mountain roads to enjoy a more engaging drive.
Was this review help?
15
3
Share
Expand All
LeLilliana
10/18/25 6:13am
I usually enjoy tinkering with car settings, and turning off the ECO mode in the Camry can make driving more fun. Typically, there's a dedicated button on the steering wheel—just press it to turn it off. If there's no button, you can access the menu through the dashboard's information screen and select "Turn Off Fuel Economy Mode." This mode saves fuel by limiting engine output and adjusting transmission logic, but it delays acceleration response. After turning it off, the throttle becomes more responsive, making overtaking more confident, though it might consume a bit more fuel. The trade-off is a more enjoyable driving experience. I often turn it off myself, especially in areas with many traffic lights, to avoid sluggish starts. It's recommended to make this adjustment while parked—safety first. Keep in mind that there might be differences between newer and older Camry models. If you're unsure, check online forums where many owners discuss this little trick. Turning off ECO can also enhance the sense of power, but don’t neglect regular maintenance.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Will the Car Shake If the Spark Plugs Are Not Tightened Properly?

If the spark plugs are not tightened properly, the car will shake. Therefore, when replacing spark plugs, the torque applied should be based on the required torque for the specific spark plug being used. Different sizes of spark plugs require different levels of torque. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover. Spark plug replacement intervals: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the owner's manual. The following standards can be used as a reference for maintenance and replacement: Platinum spark plugs should be replaced every 40,000 kilometers, standard nickel alloy spark plugs every 20,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers.
20
2
Share

What are the trunk dimensions of the Mercedes-Benz GLC?

The trunk depth of the Mercedes-Benz GLC300 ranges from 920-1920mm, with a height of 750mm and width of 1100mm, offering a maximum volume of 1600L. The Mercedes-Benz GLC is positioned as a midsize SUV in the market, featuring a 5-door, 5-seat layout. Its official body dimensions are 4764/1898/1642mm (length/width/height), with a wheelbase of 2973mm. In terms of product positioning, the Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz, essentially serving as the coupe version of the GLK. Additionally, the GLC offers 4Matic all-wheel drive. Regarding power output, the GLC delivers maximum power outputs of 135 kW, 155 kW, and 180 kW respectively. Its integrated control system features a touchpad and dynamic drive selector, including functions like Distance Pilot for automatic following. With three different power calibrations, it enhances wading depth and off-road capability by 100mm and 50mm respectively. The powertrain options include multiple configurations. For gasoline engines, it offers 1.8T, 2.0T, and 3.0L V6 variants. The interior of the new GLC L continues the current design, adopting a similar layout to the C-Class - featuring classic twin-tube instrument clusters with red needles and target-pattern backgrounds. The minimalist wood-grain center console pairs with a 3-color adjustable ambient lighting system, complemented by an 8.4-inch high-resolution color display and 13.97cm multifunctional instrument screen. It also integrates COMAND-Online, LINGUATRONIC voice control, Mercedes-me connectivity, and smartphone integration systems.
6
4
Share

What is the tire pressure range for the Honda XR-V?

The normal tire pressure range for the Honda XR-V is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Honda XR-V does not have a tire pressure monitoring button. This vehicle uses a passive tire pressure monitoring system, which does not display or allow access to specific tire pressure values. Only when the tire pressure is abnormal will an icon appear on the dashboard to alert the driver. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of excessive tire pressure: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of various parts of the tire, leading to abnormal overheating due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; significantly increases friction between the tire and the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it will trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new part.
4
1
Share

Can I Pass the License Renewal Medical Exam with Color Weakness?

During the driver's license renewal medical examination, if the driver has red-green color weakness, they will not pass the exam. However, if the driver only has color weakness for other colors, it will not affect the renewal process. If the color weakness is not particularly severe, the driver may try wearing specialized glasses designed to correct color weakness, which could help them pass the examination. The medical examination items for license renewal include: Height: For passenger cars, a height of 150 cm or above is generally acceptable. For larger vehicles such as buses or tractors, a height of 155 cm or above is required. Vision: Uncorrected or corrected visual acuity must reach 4.9 or above on the logarithmic visual acuity chart. Color Vision: No red-green color blindness is allowed. Hearing: The ability to discern the direction of sound at a distance of 50 cm from a tuning fork. Upper Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement and function. Lower Limbs: Both lower limbs must be intact with normal movement. The length difference between the lower limbs must not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. Trunk and Neck: No movement dysfunction. Additionally, there are several other tests, including grip strength, deep squat and stand-up, blood pressure, and electrocardiogram. Notes for driver's license renewal upon expiration are as follows: Within 90 days before the driver's license expires, visit the local vehicle management department to obtain or download and fill out the "Motor Vehicle Driver's License Application Form." For license renewal due to expiration or reaching the specified age, the "Motor Vehicle Driver's Physical Condition Certificate" must also be completed. Undergo a medical examination at designated renewal centers or medical institutions at or above the county level. Required documents include the old driver's license, the driver's identity proof and its copy, the "Motor Vehicle Driver's License Application Form," and the "Physical Condition Certificate."
19
1
Share

What model of tires are installed on the Audi Q5?

Audi Q5's tire models are specifically introduced as follows: 1. Tire models for Audi Q5: According to the manufacturer's vehicle parameters, the high-end models of FAW Audi Q5 are equipped with Pirelli's EXCELLENCE series tires in size 235/55R19, or Michelin's 235/65R17 (low-end models) and Goodyear's 235/60R18 (mid-range models). 2. Tire models for imported Audi: Imported Audi Q5 uses Continental tires. 3. Tire selection: Generally, there are the above three types of tire models available for Audi Q5.
11
0
Share

How to Replace the Sunroof Seal?

Methods for replacing the sunroof seal: 1. Slowly pull out the old seal along the track and clean the gaps inside thoroughly; 2. Align the new seal with the sunroof track and firmly press it into place; 3. Carefully inspect the seal for any protruding sections. If found, it indicates incomplete installation, requiring additional force to push the protruding part in. Note: During installation, ensure drainage holes are left unobstructed. Otherwise, water from the sunroof may fail to drain properly, potentially seeping into the vehicle interior and causing significant damage to the car body.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.