···
Log in / Register

How to Turn Off the Automatic Headlights on Honda Vezel?

6Answers
LaylaAnn
07/23/2025, 04:01:18 PM

To turn off the automatic headlights on the Honda Vezel, simply avoid placing the knob in the Auto position for the automatic headlights. Only the higher-end Vezel models come equipped with automatic headlights. If your vehicle is equipped with automatic headlights, they will remain off during the day and automatically turn on at night. Additionally, the headlights will automatically turn off after locking the car. The Honda Vezel is a compact SUV from Honda, featuring two engine options: a 1.5L naturally aspirated engine with 131 horsepower and 155 Nm of maximum torque, and a 1.5L turbocharged engine with 177 horsepower and 220 Nm of maximum torque. Both engines are paired with a CVT transmission.

Was this review help?
117
Share
SanKimberly
08/10/2025, 11:37:13 AM

Turning off the Honda Vezel's automatic headlights is incredibly simple - it's all done via the control stalk on the left side of the steering wheel. Locate the rotatable knob, which should currently be set to AUTO position. Just twist it fully to the OFF position. I've tested this multiple times - the lights automatically activate when entering tunnels during daytime as ambient light dims, which is actually quite thoughtful design. However, you'll need to manually disable them during car washes or when parking in underground garages for light inspections, otherwise they'll stay on and drain the battery. That said, I recommend keeping automatic headlights enabled unless absolutely necessary, as they significantly improve safety by activating during dusk or rainy conditions, preventing accidents caused by forgotten lights. You can adjust this setting with just the vehicle's electrical system powered on - no need to start the engine. After turning it off, the small green AUTO indicator on the instrument panel will disappear, confirming successful deactivation. For occasional manual operation, simply turn the knob to the headlight icon position.

Was this review help?
15
Share
Expand All
Colton
09/22/2025, 10:58:05 PM

A veteran driver with over a decade of experience tells you: Turning off the Vezel's automatic headlights is just three simple steps. With your left hand, locate the light control stalk at the lower left corner of the steering wheel, find the knob marked with 'AUTO', then rotate it counterclockwise until you hear a click—that means it's in the OFF position. Some car enthusiasts often ask why they should turn it off? Actually, manual deactivation is only needed in specific scenarios, such as when adjusting after headlight modifications or when car washers want to avoid accidental activation from water splashes. Important reminder: After turning it off, the automatic light indicator on the dashboard will disappear. If you enter a tunnel and the light dims, remember to manually turn on your headlights—safety always comes first. In most cases, I recommend keeping it in AUTO mode—it's hassle-free and aligns with safe driving logic. You'll especially appreciate this feature during rainy or foggy conditions with low visibility.

Was this review help?
13
Share
Expand All
StRylee
11/06/2025, 12:13:53 AM

Want to turn off the automatic headlights? Easy! Lean forward from the driver's seat and look at the left stalk on the steering wheel. The knob is currently in AUTO position, right? Just rotate it to the OFF position and you're done. That's how I always do it with my Honda Vezel: after powering on the vehicle, it takes just two seconds to switch. Many people wonder what changes after turning it off? Well, the headlights won't automatically turn on/off based on light conditions anymore, so you'll need to remember to turn them on at night. However, I recommend setting a phone reminder after disabling it to avoid forgetting during night driving. Also, the knob position varies slightly across different Vezel model years - in newer versions, OFF might be positioned next to the parking lights, just try rotating it to the end. Remember to turn off lights when washing your car to protect the relay's lifespan.

Was this review help?
7
Share
Expand All
BrielleLee
12/27/2025, 02:01:41 AM

As a Vezel owner, I've tested this effective method: Locate the knob on the left lower steering wheel light control lever and turn it directly to OFF. The key is observing dashboard changes - the original green AUTO indicator must turn off to confirm deactivation. This operation takes under 10 seconds and can be adjusted even when the engine is off. Why this design? Primarily for special needs like circuit inspection in garages. But don't permanently disable auto mode - especially when entering tunnels on highways, its reaction speed far surpasses human eyes, preventing hazards. If concerned about operation difficulty, check the relevant manual pages (usually in the lighting section). In daily use, I only disable it during car washes - AUTO mode ensures safety and convenience otherwise.

Was this review help?
11
Share
Expand All
DeBrooklyn
03/24/2026, 10:29:09 PM

Just helped my neighbor with this: There's a knob on top of the left-side headlight control stalk (near the steering wheel). It currently shows AUTO, right? Rotate it fully counterclockwise to reach OFF position - turns as smoothly as an audio knob. Notice anything? The auto headlight indicator on your dashboard will disappear. Important detail: Some older models require the engine to be running for adjustment, while newer ones work with just ignition on. When you disable auto headlights, you assume full lighting control - remember to manually activate them at dusk or in rain. Once I forgot to turn them on after sunset and nearly missed seeing a lane-changing vehicle in my mirrors. Unless you're checking bulbs or washing the car, I strongly recommend keeping the auto feature enabled for safety.

Was this review help?
13
Share
Expand All
More Q&A

What is the installation method for the Great Wall Wingle 5 flywheel?

The installation method for the Great Wall Wingle 5 flywheel is as follows: 1. Adjust the crankshaft pulley to the first cylinder. 2. There is a letter next to the screw on the flywheel. Align the point on the back of the flywheel with the point on the crankshaft when the 'T' is facing upwards to complete the installation. Additional information about the Great Wall Wingle 5 is as follows: 1. Exterior: The new vehicle adopts a family-style grille design and is equipped with ABS+EBD, reverse radar, a 120km/h overspeed warning, a multifunction steering wheel, and leather seats. Overall, there are no significant changes in the exterior and interior compared to the current model. 2. Configuration: The new vehicle is equipped with four power windows, imitation leather seats, reverse radar, 15-inch aluminum alloy wheels, headlight height adjustment function, and ABS+EBD as standard features on all models. 3. Powertrain: The Wingle 5 is powered by a GW4D20E 2.0T diesel engine, with maximum power outputs of 75kW and 105kW, and peak torque of 225N•m and 315N•m. The transmission system is matched with a 5-speed manual or 6-speed manual gearbox.
106
Share

How to remove the rear trunk panel of BMW X3?

To remove the rear trunk panel of BMW X3, first locate the position of the clips. Here are the detailed steps: 1. Operation for removing the rear trunk panel of BMW X3: Find the position of the clips on the BMW X3 trunk panel, then release the clips to directly remove the trunk panel. 2. Function of the car trunk: The car trunk is usually used to store personal belongings of the passengers. For SUV models, the trunk space can be flexibly adjusted according to the amount of luggage by changing the position of the rear seats, thus controlling the trunk volume. 3. The modifications of the new BMW X3 are mainly focused on the front and rear: The new model will feature updated headlight assemblies and redesigned fog light structures. The BMW X3 is an SUV model with an elegant and dynamic appearance, combining versatility and practicality.
103
Share

Differences Between Teana and Sylphy?

Sylphy is positioned as a family car while Teana is positioned as a commercial vehicle. The following are specific introductions about Teana and Sylphy: 1. Differences in appearance between Sylphy and Teana: The central V-shaped grille area of the Teana has a stronger three-dimensional effect, the side chrome anti-scratch strips have been removed, and the rear has been updated with a new style of taillights that echo the design of the headlights, making the overall design more youthful and fashionable. In contrast, the Sylphy adopts Nissan's latest family-style design language, with the front grille decorated by a delicate U-shaped chrome strip, giving the entire car a youthful and sporty look. 2. Differences in chassis between Sylphy and Teana: The Teana chassis adopts a lower-cost front MacPherson strut and rear torsion beam non-independent suspension, with an overall tuning style that is solid and heavy. The Sylphy chassis suspension system also uses front MacPherson strut and rear torsion beam non-independent suspension, but the overall tuning style is softer and more comfortable. 3. Differences in power configuration between Sylphy and Teana: The Sylphy is equipped with a 1.6L engine paired with a 5-speed manual or CVT automatic transmission and a 1.8T engine paired with a 6-speed manual or CVT automatic transmission, while the new Teana will be powered by a 2.0L naturally aspirated engine and a 2.0T turbocharged engine.
108
Share

Is the BMW X1 front-wheel drive or rear-wheel drive?

BMW X1 is front-wheel drive, with a front-engine, front-wheel-drive layout, meaning the engine is positioned at the front and the front wheels drive the entire vehicle. The BMW X1 is a compact SUV model with dimensions of 4565mm in length, 1821mm in width, 1624mm in height, and a wheelbase of 2780mm. It features a 7-speed dual-clutch transmission and a trunk capacity ranging from 505L to 1650L. The BMW X1 utilizes a turbocharged intake system, direct fuel injection, an aluminum cylinder block, delivering a maximum power of 103kW and a maximum horsepower of 140ps. It has electric power steering, a double overhead camshaft valve structure, front ventilated disc brakes, and rear disc brakes.
105
Share

What Causes Glass to Shatter?

Glass shattering mainly occurs due to the following reasons: 1. Stones, impurities, or bubbles in the glass: Impurities in the glass are weak points and stress concentration areas in tempered glass. Particularly, if stones are located in the tensile stress zone of tempered glass, they can be a significant factor leading to cracking. 2. Presence of nickel sulfide crystals in the glass: Nickel sulfide inclusions usually exist as small spherical crystals with diameters ranging from 0.1 to 2 mm; they appear metallic in appearance. These inclusions are NI3S2, NI7S6, and NI—XS, where X=0—0.07. Among them, only NI1—XS is the main cause of spontaneous shattering in tempered glass. 3. Defects such as scratches, chips, or deep edge cracks on the glass surface caused by processing or improper handling, which can easily lead to stress concentration or spontaneous shattering of tempered glass.
117
Share

What are the differences between the Mercedes-Benz A-Class and CLA-Class?

The differences between the Mercedes-Benz A-Class and CLA-Class are: 1. Different body lines: The A-Class adopts a crease design; the CLA-Class features a dual waistline design. 2. Different wheelbases: The A-Class measures 4609mm; the CLA-Class is 2699mm. 3. Different wheels: The A-Class has two-tone wheels; the CLA-Class comes with aluminum alloy wheels. 4. Different body dimensions: The A-Class dimensions are 4622mm in length, 1796mm in width, and 1454mm in height, while the CLA-Class measures 4692mm in length, 1830mm in width, and 1422mm in height.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.