···
Log in / Register

How to Turn Off the Auto Start-Stop on Volvo XC60?

6Answers
MaverickLynn
09/07/2025, 02:29:57 AM

First, the auto start-stop switch is located on the left side of the steering wheel. Press the button marked with an arrow circling an 'A' and 'OFF' below it to turn it off. However, it cannot be permanently disabled; it will automatically reactivate each time the engine is started. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move again, the system automatically restarts the engine.

Was this review help?
110
Share
AthenaDella
09/19/2025, 01:41:53 AM

I've been driving a Volvo XC60 for several years. Although the auto start-stop system saves fuel, the slight shudder when starting at red lights is uncomfortable, especially during frequent stops in heavy traffic. Turning it off is quite simple: After sitting in the driver's seat and starting the engine, look toward the center console near the air conditioning panel. There's a button with an 'A' inside a circle—just press it gently. A small indicator light, usually yellow or green with an 'off' symbol, will illuminate on the dashboard, indicating the system is disabled. However, remember that Volvo designs it to default to 'on,' so you'll need to repeat this step every time you restart the car—there's no permanent deactivation option. I've checked the settings menu but couldn't find a permanent disable feature. Disabling start-stop while driving does improve comfort by reducing unnecessary vibrations, but don’t forget to regularly maintain and check the battery and sensors to prevent other system issues that could affect safety.

Was this review help?
8
Share
Expand All
LeEmersyn
11/02/2025, 01:04:54 AM

The auto start-stop function is designed to optimize fuel consumption and emissions, but the system in the XC60 sometimes responds too aggressively. In traffic jams, it keeps shutting off and restarting the engine, making the ride bumpy and unpleasant. As a car enthusiast, I've researched how to manually disable it. The method is to locate the physical button marked with something like 'off' or an 'A' in the center console area after starting the car. It's usually found to the lower left of the steering wheel or near the front storage compartment. Pressing it immediately deactivates the system, and a feedback light will illuminate on the dashboard. This method is only temporary—the system reactivates when the car is turned off and restarted, unlike some modifications that can permanently disable it. I recommend checking the owner's manual for details. If the button doesn't work, it might be a fuse or wiring issue. By the way, the system relies on the engine and battery condition; it automatically disables when the battery is weak, so keeping these components in good health can reduce unnecessary interventions.

Was this review help?
15
Share
Expand All
LaAllison
12/16/2025, 01:08:53 AM

The Volvo XC60's auto start-stop deactivation is straightforward: After starting the car, simply press the button on the center console marked with a circled capital 'A' or 'off' label, usually located near the gearshift or climate controls. The instrument cluster will display an extinguished or color-changed indicator light, confirming system deactivation. This temporary shutdown requires repetition after each ignition cycle as no permanent disable option exists—avoid ECU tampering. If the button proves unresponsive, consult the manual or scan for trouble codes using diagnostic tools. Disabling start-stop enhances driving smoothness, particularly in urban conditions.

Was this review help?
14
Share
Expand All
StAshlyn
02/05/2026, 01:58:20 AM

When driving the XC60, I noticed that the vibration from the auto start-stop system affects passenger comfort, especially when carrying family members or during long trips. For safety and comfort, many choose to disable it. The method is simple: after starting the engine, locate the button on the center console—often near the cup holders or to the left of the steering wheel—and press the one labeled 'A-off' or with the auto start-stop symbol. A dashboard indicator will confirm deactivation. However, this feature resets upon vehicle restart, so make it a habit to disable it before each drive. Personally, I believe frequent engine start-stop cycles may pose long-term wear risks, particularly in older vehicles. Maintaining regular servicing and checking the electrical system can prevent related issues, ensuring a smooth and worry-free driving experience overall.

Was this review help?
12
Share
Expand All
Guzman
04/30/2026, 06:02:36 PM

Turning off the auto start-stop on the Volvo XC60 is quite easy, and I do it often. After starting the car, look for a button in the center console area, usually marked with an 'A', and press it. The dashboard will light up a warning light to indicate the system is off. You have to repeat this every time you start the car because it's enabled by default. There's no simple setting to permanently disable it, though it might be possible to change the code using programming tools, but I don't recommend that. The start-stop function relies on sensors and the battery, so maintaining these well can reduce unnecessary starts. Turning it off makes the driving experience smoother, especially preventing unexpected stalls when reversing.

Was this review help?
7
Share
Expand All
More Q&A

Should the clutch be pressed when braking in first gear during Subject Three?

Generally, it is not necessary to press the clutch when braking in first gear during Subject Three. Below is an introduction to Subject Three: Introduction: Subject Three, including the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. Test content: preparation before getting on the car, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, parking by the side of the road, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.
114
Share

How Often Must Tires Be Replaced?

Tires must be replaced every 5 years or 80,000 kilometers. Below is additional information: Rotating tire positions: The longer tires are used, the higher the risk of tread deformation or blowouts. To extend tire lifespan, rotate the front and rear tire positions every 10,000 to 20,000 kilometers. Driving performance: Generally, front tires wear out faster than rear tires. Rotating them ensures more even wear and prevents premature front tire failure. Tires are circular elastic rubber products mounted on metal rims, supporting the vehicle body, absorbing shocks, and ensuring proper contact with the road for optimal driving performance. Essential requirements: Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes. Thus, they must possess high load-bearing capacity, traction, and shock absorption.
105
Share

Where is the frame number located on an electric tricycle?

Each brand of tricycle has different models, and as the name suggests, the location of the frame number varies—some are on the frame, while others are on the wheels. Therefore, when purchasing a tricycle, it's advisable to clarify this with the dealership first. Below is some information about the frame number: Introduction: The frame number is the VIN (Vehicle Identification Number). VIN is the abbreviation for Vehicle Identification Number. Relevant regulations: According to SAE standards, the VIN consists of 17 characters, hence it is commonly referred to as the 17-digit code. It contains information about the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location, among other details. Correctly interpreting the VIN is crucial for owners to accurately identify the vehicle model and perform proper diagnosis and maintenance.
120
Share

Where is the rear bumper located on a car?

The bumper at the front of the car is called the front bumper, while the one at the rear is referred to as the rear bumper. Here is some extended information: Composition and Function: A car bumper consists of three parts: the outer panel, cushioning material, and crossbeam. It not only enhances the vehicle's appearance but also absorbs and mitigates external impacts, protecting the front and rear of the car body. This design helps protect pedestrians during collisions and reduces injuries to occupants even in high-speed impacts. Rear Bumper: The rear bumper is a crossbeam located below the taillights. In addition to maintaining their original protective function, both front and rear bumpers now aim to achieve harmony and unity with the car's overall styling while pursuing lightweight construction. Nowadays, most car bumpers are made of polypropylene plastic.
106
Share

Will covering the license plate be captured by electronic police?

It will be captured by electronic police and result in a 12-point deduction. Here is some information about covering license plates: Intentional covering: According to the "Road Traffic Safety Law of the People's Republic of China," public security traffic management departments will issue a warning or impose a fine for intentionally covering or defacing motor vehicle license plates, with a one-time deduction of 12 points. Unintentional covering: For situations where the vehicle body and its license plate are covered by mud due to rain, snow, or road conditions, or where the cargo of a truck affects the recognition of the license plate, the traffic management department of the public security organ will order the party to correct the situation on the spot.
112
Share

How many seconds after the light turns from green to red does the camera start capturing?

The camera starts capturing two seconds after the light turns from green to red. If a motor vehicle crosses the stop line while the light is green but stops in the middle of the road when the light turns red, it will not be considered running a red light. Below is relevant information about running a red light: Definition: Running a red light refers to the act of motor vehicles, non-motor vehicles, pedestrians, etc., violating traffic signal instructions by crossing the stop line and continuing to move when the red light is on and passage is prohibited. Hazards: Endangers personal safety; causes traffic accidents, endangers others' safety, and forces normally moving vehicles to take emergency evasive actions, leading to rear-end collisions, rollovers, and crashes; disrupts traffic order.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.