How to Turn Off the Ambient Light?

2 Answers
VonEmerson
07/29/25 5:40am
The method to turn off the car's ambient light is as follows: the first button on the left side of the steering wheel, when pushed downward, can adjust the light to its dimmest setting. Ambient lighting in cars has now become a key selling point for many vehicle models and is favored by numerous consumers. Relevant information about car ambient lighting is as follows: 1. Definition of Ambient Light: Car ambient lighting is essentially an interior light used to enhance the atmosphere inside the vehicle. It allows users to set the color, brightness, temperature, and direction of the light as needed, making the interior more vibrant at night, enhancing the mood, and creating a specific ambiance. 2. Function: Typically, car ambient lights are mainly red, blue, green, etc., similar to common decorative lights, and the colors can be freely chosen. However, it is important to note that the color of the ambient light should not interfere with normal safe driving. After all, its primary purpose is to enhance the atmosphere, soothe the driver's mood, and alleviate fatigue.
Was this review help?
18
4
Share
ChloeRose
08/12/25 9:13am
As someone who frequently goes on self-driving trips, I've driven several cars, and the method to turn off ambient lighting is actually quite personalized. In my Volkswagen Golf, you need to first sit in the car, start it, then tap the settings icon on the central display, scroll to the vehicle options to find the lighting settings, where there's an ambient light switch—just tap it to turn it off. Why pay so much attention to turning it off? Because during night highway driving, overly bright ambient lights can interfere with vision, causing distraction and lack of focus. Sometimes, they can also be uncomfortably flashy when waiting at traffic lights. Different car brands handle this differently—BMW uses the iDrive system to scroll through menus, while Toyota adjusts it via steering wheel buttons. Turning them off not only saves a bit of power but also helps with battery endurance, especially during long-term parking. Ambient lighting is designed to enhance driving pleasure, but switching it on or off as needed is a matter of habit—don’t let small things compromise safety.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What Does Rear Axle Ratio Mean?

The rear axle ratio of a vehicle is an important parameter of the engine, academically referred to as the final drive ratio. Here are the specific details: 1. The rear axle ratio is the gear ratio of the final drive in the vehicle's drive axle: The rear axle ratio reduces the rotational speed from the driveshaft, serving the purpose of deceleration and torque increase. 2. The vehicle's rear axle needs to be used in conjunction with the transmission: Different gears in the transmission have different ratios, and the total ratio of the vehicle is the product of the transmission gear ratio and the rear axle ratio. 3. All vehicle rear axles are equipped with a reduction gear to decrease the rotational speed from the driveshaft, where the ratio is the transmission ratio: The optimal transmission ratio helps the engine operate under the best conditions and also minimizes gear wear.
1
0
Share

How to Remove the Drive Shaft of a Cruze?

The method for removing the drive shaft of a Cruze is as follows: 1. Remove the drive shaft from the vehicle, starting by detaching the rear end of the main drive shaft. The removal should begin from the rear end of the rear section of the drive shaft, proceeding forward sequentially. First, unscrew the four bolts on the universal joint fork connected to the drive axle, then detach the rear end of the main drive shaft; 2. Next, unscrew the four bolts on the universal joint fork connected to the intermediate drive shaft; detach the front end, allowing the entire main drive shaft to be removed; 3. Loosen the connecting bolts between the intermediate support and the vehicle frame crossbeam, then detach the end with the intermediate support. Finally, loosen the nuts connected to the parking brake drum and remove the entire intermediate drive shaft.
10
4
Share

How to Troubleshoot Water Leakage Under the Driver's Seat?

Methods to troubleshoot water leakage under the driver's seat are as follows: 1. Check for blockages: Inspect the drainage holes of the sunroof, doors, and air conditioning system for any blockages. If blocked, clean them thoroughly and drain the accumulated water. 2. Check for replacements needed: Examine the sealing rubber rings and strips of the sunroof and doors for any deformation or aging. If found, replace the rubber components. Reasons for water leakage in the car cabin are as follows: 1. Blocked sunroof drainage holes: Sunroof drainage holes are prone to blockage by leaves and dust. Once blocked, rainwater cannot drain promptly during rain, leading to water seepage into the cabin. 2. Aging of sunroof sealing rubber rings: Rubber components harden and age over time. When the sunroof rubber rings age, their sealing effectiveness decreases, causing leaks during rain. Additionally, using high-pressure water guns or strong acidic/alkaline cleaners during sunroof maintenance can deform or age the rubber rings. 3. Blocked air conditioning drainage holes: During operation, the car's air conditioning system produces condensation in the evaporator. If the drainage hole is blocked, the condensation water may leak from the co-driver's side. 4. Poor door sealing: Doors are equipped with sealing strips. If improperly installed or aged and hardened, the door's sealing effectiveness decreases, allowing water ingress during rain or when driving through flooded areas. 5. Blocked door drainage holes: Due to their low position, door drainage holes are easily clogged by mud. If rainwater accumulates in the door and cannot drain, it may seep into the cabin.
9
4
Share

How to automatically tilt the rearview mirror when reversing in the Volkswagen Phideon?

Turn the mirror adjustment button on the door armrest to the R position, then shift the car into reverse gear to automatically tilt the mirror. Below is an introduction to the Volkswagen Phideon: 1. The overall body design of the Phideon follows the design concept of the previous CCoupe concept car, featuring Volkswagen's family-style front design. The front grille integrates with the LED headlights and extends to the sides of the body. The side waistline runs through the entire body and extends above the taillights. Additionally, the taillight design is particularly noteworthy, with a double-layer layout where the lower layer tapers inward, creating a staggered effect. 2. The interior of the Volkswagen Phideon maintains the standard Volkswagen style, but it stands out in terms of features. The new model is equipped with advanced technologies such as a night vision system and a heads-up display, as well as electrically adjustable rear seats with independent ventilation/heating functions. 3. In terms of power, the Volkswagen Phideon is expected to offer multiple gasoline and diesel engines or a plug-in hybrid system, paired with an automatic transmission. Furthermore, the Phideon will also feature an air suspension system and offer five driving modes to choose from.
2
3
Share

Why does the Tayron have gearshift jerking?

The gearshift jerking in the Tayron is caused by a mismatch between the engine speed and the current vehicle speed, resulting in a speed difference between the engine and the clutch. Below are some relevant details about the Tayron: 1. The Tayron is an SUV model under FAW-Volkswagen, based on the European version of the Tiguan. It comes equipped with features such as a 360° panoramic camera, third-generation intelligent parking assist system, blind spot detection, and also includes the TJA Traffic Jam Assist system. 2. In terms of interior design, it adopts the latest family-style layout with the dashboard slightly tilted towards the driver's seat for easier operation. The lower part of the dashboard and the gearshift area follow a more traditional, simple layout. A 10.3-inch full LCD instrument cluster paired with a 9.2-inch central touchscreen and 10-color adjustable ambient lighting gives the cabin a more youthful and stylish feel. 3. The Tayron features Volkswagen's new family design language, which has been gradually adopted across several new models. Compared to previous Volkswagen designs, the Tayron appears more youthful and fashionable. The front fascia features a horizontal grille paired with LED headlights on both sides, effectively stretching the visual width. The waistline extends from the headlights to the taillights, while the rear design is rounded and bold, with strong lines creating a muscular appearance.
17
2
Share

How Many Cylinders Does the Cruze Have?

The Cruze is equipped with a three-cylinder engine. Below are the relevant details about the Cruze: 1. The Cruze comes with two engine options: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. The 1.0-liter turbocharged three-cylinder engine delivers a maximum power of 92 kW and a maximum torque of 170 Nm, while the 1.3-liter turbocharged engine produces a maximum power of 120 kW and a maximum torque of 230 Nm. 2. The dimensions of the Cruze are 4630mm in length, 1798mm in width, and 1485mm in height, with a wheelbase of 2640mm. 3. The Cruze comes standard with LED lighting technology across all models. The sharp-looking LED automatic sensing headlights feature Chevrolet's classic dual-element design, incorporating a three-dimensional LED light guide daytime running light. It utilizes the segment-leading light guide tube with thickened LIGHTINGBLADE double-layer light guide technology, ensuring more uniform light distribution.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.