How to Turn Off the Air Conditioning in the Tayron?

1 Answers
EvelynMarie
07/29/25 2:59pm
To turn off the air conditioning in the Tayron, you can either rotate the knob all the way to the left to shut it off, or press the menu button below the AUTO button on the air conditioning panel. This will bring up the air conditioning control interface on the central display screen, where you can find the OFF button in the lower-left corner—simply click it to turn off the system. The Tayron is a mid-size SUV under FAW-Volkswagen, featuring a 5-door, 5-seat SUV body structure. Its dimensions are 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm. It is powered by a 1.4T inline-four turbocharged engine producing 150 horsepower, and its suspension system combines a MacPherson strut front suspension with a multi-link rear suspension.
Was this review help?
7
0
Share
More Forum Discussions

How to Install a GPS Tracker in a Car?

Methods for installing a GPS tracker in a car: 1. Connect the red wire to the power supply interface and to the positive terminal of the power source; 2. Connect the black wire to the negative terminal of the power source; 3. Connect the power interface of the GPS tracker; 4. Arrange the wiring properly and place the wires under the windshield; 5. Connect the main unit to the interface of the GPS tracker; 6. Insert a mobile phone SIM card. Functions of a car GPS tracker: Stolen vehicle alarm—once this feature is enabled, an alarm will sound as soon as the car is started, achieving dynamic positioning. Data is transmitted every ten seconds, ensuring the safety of the vehicle.
10
3
Share

How to deal with paint scratches caused by knife when applying car wrap?

Repair methods for paint scratches caused by knife when applying car wrap: 1. Light scratch repair: The method is very simple, just use a compound to wipe along the scratch line until the scratch disappears, then repeat with a fine compound and wax; 2. Moderate scratch repair: Slightly deeper than light scratches but without exposing the metal surface, simply dip a soft brush tip in paint and dab it on, then let it dry; 3. Deep scratch repair: When the metal surface is exposed, especially for thin and deep scratches, use putty for repair. Sand the scratched area with sandpaper without enlarging the damaged area, clean the scratched spot thoroughly, carefully apply putty to ensure it fully fills the gaps, then apply compound and wax.
19
1
Share

How to Use the Cruise Control on Buick Regal?

To use the cruise control on Buick Regal: 1. The cruise control function is operated via the multifunction buttons on the left side of the steering wheel. Press the cruise control button to enter standby mode; 2. After accelerating the vehicle to the desired speed, press the SET- button to activate cruise control; 3. Press the RES+ button to increase the speed; 4. Press the SET- button to decrease the speed; 5. Press the distance button to adjust the following distance; 6. To temporarily deactivate cruise control, press the button on the left side of the steering wheel or apply the brake pedal; 7. To resume cruise control, press the RES+ button again. To completely exit cruise control, press the cruise control button.
6
2
Share

How to Shift Gears in the Tiguan L?

The operation method for shifting gears in the Tiguan L is as follows: 1. Enter the driver's seat to see the gear shift lever. 2. The "P" gear is the parking gear; shift into this gear after parking. 3. Shifting into the "R" gear engages the reverse gear; pay attention to the rear situation when reversing. 4. The "N" gear is the neutral gear; this gear can be used for short-term parking. 5. The "D" gear is the automatic forward gear; control the speed reasonably. 6. The "S" gear is the sport mode gear. 7. Additionally, manual upshifting and downshifting operations can also be used.
6
0
Share

What are the causes of rear shock absorber noise in the Baojun 730?

Baojun 730 rear shock absorber noise causes are as follows: Shock absorber itself leaking oil or bent: The solution is to check whether the shock absorber is leaking oil. Under conditions of no rain or car washing, directly inspect the shock absorber housing or dust cover. A faulty shock absorber will feel unusually hard when pressed, which is a symptom of oil leakage in the later stages. The shock absorber should be replaced directly. Shock absorber pressure bearing aging or abnormal wear: The solution is to directly replace the shock absorber pressure bearing or perform lubrication. Caused by deformed shock absorber spring: The solution is to directly replace the shock absorber spring. Wheel bearing noise: Directly replace the wheel bearing.
5
3
Share

How to Determine if a Car's Charcoal Canister is Faulty?

Methods to determine if a car's charcoal canister is faulty: The fuel vapor adsorbed in the charcoal canister will directly dissipate into the air, causing a strong gasoline smell inside the car or around the vehicle. If the air inlet of the charcoal canister or its filter screen becomes blocked, the fuel vapor adsorbed in the charcoal canister will be difficult to be drawn into the cylinder by the intake manifold's negative pressure, resulting in unstable engine idle speed fluctuations. A charcoal canister is a container filled with activated carbon, used to adsorb gasoline vapor escaping from the fuel tank and carburetor when the engine is turned off. When the engine starts, the adsorbed gasoline is blown out and burned. The charcoal canister is a crucial component in the ignition and emission systems.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.