How to Switch to Manual Mode in Verano?

Which Side is the Front and Back of the Vehicle License?

The front side of the vehicle license includes text such as "License Plate Number," "Vehicle Type," "Usage Nature," "Address," "Brand and Model," "Engine Number," "Vehicle Identification Number (VIN)," "Registration Date," and "Issue Date." The back side of the vehicle license is the side with the annual inspection seal. Below are the specific details: After one year of probation: After the one-year probation period for the driver's license, there is no need to visit the issuing vehicle management office for a replacement, as the system will automatically convert the probation period to a full license. However, any traffic violations must be addressed. After six years: Once the driver's license reaches six years, it must be replaced with a new one at the issuing vehicle management office. The required materials include a medical examination form (from a hospital designated by the traffic police department), the driver's license, ID card, a completed application form at the vehicle management office, and three one-inch color photos. No violation records: If there are no records of violations resulting in 12 penalty points within any one cycle during the six years, the new license will automatically be converted to a 10-year validity period.

16

0

Share

What are the Lamborghini models?

Lamborghini currently offers three models: Aventador, Urus, and Huracán. Below is relevant information about Lamborghini: Introduction to Aventador: The Aventador is Lamborghini's flagship supercar, succeeding the Murcielago and officially unveiled at the 2011 Geneva Motor Show. Its low-slung body, scissor doors, massive air intakes around the vehicle, and the visible V12 engine under the glass remain iconic Lamborghini styling. Introduction to Urus: The Lamborghini Urus is a four-seater vehicle produced by Automobili Lamborghini S.p.A. Even compared to American full-size SUVs, the Urus holds its own with dimensions of 4990×1990×1660 mm (length×width×height). Introduction to Huracán: The name 'Huracán' translates to 'hurricane' in Spanish. In terms of design, the Huracán shares strong similarities with the previously released Sesto Elemento concept car, embodying Lamborghini's signature aggressive styling, particularly with its full LED taillights at the rear. Through lightweight design, this new model utilizes carbon fiber materials to further reduce body weight.

11

5

Share

What engine is equipped in the Great Wall Haval M6?

Haval M6 is equipped with a 1.5T turbocharged engine provided by the Hyundai Group, so this engine is made in South Korea. The engine model used in Haval M6 is GW4G15B, with a maximum horsepower of 150 hp, a maximum power of 110 kW (150 hp/5600 rpm), and a maximum torque of 210 N·m/2200-4500 rpm, featuring electronic fuel injection technology. For the daily maintenance of Haval M6's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil volume moderate; When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

5

2

Share

What engine is used in the BMW X4?

The engine of the BMW X4 is imported from Germany and assembled at the Dadong factory. The engine model of the BMW X4 is B48B20. The 25i version has a maximum power of 135kW, a maximum horsepower of 184, and a maximum torque of 290Nm. The 30i version has a maximum power of 185kW, a maximum horsepower of 252, and a maximum torque of 350Nm. For daily maintenance of the BMW X4 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, causing various problems for the engine. To avoid malfunctions, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate; When oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to bypass through the bypass valve and still carry dirt back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine's normal operation but also extends the overall lifespan of the radiator and engine. The BYD M6 engine is produced by Shenyang Aerospace Mitsubishi Automotive Engine Manufacturing Co., Ltd., and is a domestically produced engine. The 2.4-liter version of the BYD M6 has an engine model of 4G69, with a maximum power of 118 kilowatts and a maximum torque of 215 Nm. The 2.0-liter version has an engine model of BYD483QB, with a maximum power of 103 kilowatts and a maximum torque of 186 Nm.

2

3

Share

Where to Add Windshield Washer Fluid in Q5?

Audi Q5's windshield washer fluid needs to be added to the reservoir tank, which is located in the engine compartment. Open the engine hood, and you can find it in the upper right corner near the driver's side. Below is relevant information about windshield washer fluid: Windshield washer fluid is an automotive product composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It also features antifreeze, anti-fog, lubrication, anti-corrosion, and anti-static functions. The Audi Q5 is a dynamic and versatile SUV with body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height.

8

4

Share

How to Remove and Install the Rear Taillight of a Sagitar?

Here is the method for removing the rear taillight of a Sagitar: 1. Take out the car key of the Sagitar and use it to open the trunk. 2. Observe the inner lining near the rear taillight that needs to be removed, take out a flat-head screwdriver, and gently pry open the clip with the screwdriver. 3. Disconnect the wiring harness connector. Take out the flat-head screwdriver, press the wiring harness connector with it, then slightly pull outward to remove the connector. 4. Remove the taillight nuts. Take out a small ratchet with a 10mm socket and remove these two nuts. The method for installing the rear taillight: Operate from bottom to top.

8

3

Share

How to Switch to Manual Mode in Verano?

Which Side is the Front and Back of the Vehicle License?

What are the Lamborghini models?

What engine is equipped in the Great Wall Haval M6?

What engine is used in the BMW X4?

Where to Add Windshield Washer Fluid in Q5?

How to Remove and Install the Rear Taillight of a Sagitar?

Where is the license plate with 'Zhe J' from?

What is the traffic violation code 70060?

Should You Press the Brake or the Clutch First in Subject Two?

What is the general size of a Type C motorhome?