···
Log in / Register

How to start the Changan CS75 when the key fob battery is dead?

4 Answers
DiJace
07/30/25 2:10am

Mechanical key, hidden inside the back cover of the smart key. You need to press and slide open the back cover to reveal the mechanical key. After opening the back cover, pull out the key. Use the mechanical key to open the car door, then place the smart key near the sensor. For some models, the sensor is located in the cup holder, while for others, it's near the one-touch start switch. The vehicle will detect the key and allow you to start it. Once placed in the correct position, the vehicle can be started normally even if the smart key battery is dead.

Was this review help?
3
5
Share
LeCaroline
08/15/25 8:12am

I also encountered a dead key fob situation with my Changan CS75. The solution is quite straightforward: First, locate a small button or slider on the remote key, press it to pull out the hidden mechanical key inside. Then go to the car door—there’s usually a small cover on the handle that needs to be pried open to reveal the keyhole. Insert the mechanical key, turn it, and the door will unlock. Once inside, don’t rush to start the car. If the key battery is weak, the start button may not sense it, so place the entire key close to the button or in the center console’s induction area (designed near the button), press the brake pedal, and then push the start button to ignite the engine. I recommend changing the key battery regularly to avoid embarrassment during long trips—the battery model is usually CR2032, which costs just a few bucks at stores. If the car still won’t start, try adjusting the key’s position or checking the manual for specifics. In short, don’t panic—the backup method works reliably.

Was this review help?
17
1
Share
Expand All
VonHarrison
10/21/25 4:44am

I still remember one winter when the key suddenly failed, almost making me late. If your key runs out of battery, don't panic—the CS75 has an emergency solution: use the mechanical key to unlock and enter the car, then the key step is to hold the key close to the start button for a few seconds to sense it, press the brake, and press the button to start—this design is specifically for dealing with a dead battery. I believe prevention is better than a last-minute fix, so I change the key battery every year and a half to avoid hassle, otherwise, it might cause delays or even prevent you from opening the door. The operation is simple and safe, but make sure the surroundings are clear—don't try it recklessly in traffic. Lastly, remember to get genuine batteries from a 4S store or auto parts shop to avoid counterfeit products damaging your car.

Was this review help?
17
2
Share
Expand All
DeGrant
12/04/25 5:12am

CS75 Key Battery Depletion Starting Method I understand clearly: First, use the mechanical part to open the car door. After entering the cabin, hold the key close to the start button (the sensing area is usually below the button), press the brake, and then press to start. This method can basically solve the urgent problem. After solving it, replace the battery immediately. For prevention, pay attention to the key's response speed slowing down and take action promptly.

Was this review help?
5
5
Share
Expand All
More Forum Discussions

Can Modified Wheel Size Pass the Annual Inspection?

Modifying wheels is a relatively conspicuous modification. If the wheel modification is not registered with the vehicle management office, it will not pass the annual inspection. Introduction to Wheels: Wheels are the rotating part of the tire's inner rim connected to the hub through spokes, which is the metal component mounted on the axle that supports the tire. Also known as rims, steel wheels, or simply wheels. Wheels come in various types based on diameter, width, forming method, and material. Types of Wheels: Depending on the characteristics and needs of different vehicle models, the surface treatment process of wheels also varies, mainly divided into painting and plating. For ordinary vehicle models, the appearance of wheels is less considered, with good heat dissipation being a basic requirement. The process mostly involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors that last long, even when the vehicle is scrapped. Many mass-market vehicle models use painted wheels. Some fashionable and dynamic colored wheels also employ painting technology.
18
0
Share

Is the Venucia D60 compliant with China VI emission standards?

Some models of the Venucia D60 comply with China VI emission standards, while others meet China V standards. The China VI-compliant models are sold in regions where the China VI standards have been implemented, and the China V-compliant models are available in areas where the China VI standards have not yet been enforced. Below is some relevant information about the Venucia D60: 1. The Venucia D60 is a compact sedan, equipped with a 1.6-liter naturally aspirated engine across all variants. The engine, coded HR16, delivers a maximum power of 93 kW, a maximum torque of 154 Nm, with peak power achieved at 5,600 rpm and peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Venucia D60 employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle is equipped with an electric power steering system, which provides a lighter steering feel.
6
1
Share

Where is the air conditioning filter element of the Haifuxing located?

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.
12
4
Share

What are the reasons for a car not starting with no power at all inside?

There are several reasons why a car may not start with no power at all inside: 1. Dead battery: This could be due to a drained battery from leaving headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. 2. Incorrect gear position: For automatic transmission cars, the gear must be in P or N position when starting. If it is in R or D position, the car will not start. Some manual transmission cars may also not start if the clutch is not depressed. 3. Lack of antifreeze: Using water or low-quality antifreeze in the car can cause the engine to freeze and crack in extremely cold winter conditions, leading to the water pump failing to operate, the car not starting, and damage to other engine components.
4
4
Share

How to Decelerate an Automatic Transmission Car?

To decelerate an automatic transmission car, release the accelerator pedal early and apply the brake. Below are detailed introductions to the gear positions of an automatic transmission vehicle: 1. The R gear is the reverse gear. When this gear is engaged, it connects the hydraulic system's reverse gear oil circuit, causing the drive wheels to rotate in reverse for backward movement. Never forcibly shift to the "R" gear when the vehicle hasn't come to a complete stop, as this may damage the transmission. 2. The N gear is the neutral gear. When neutral is engaged, the planetary gear system idles without power output. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control device automatically connects the corresponding forward gear oil circuit based on throttle opening signals and vehicle speed signals. It can automatically shift up or down according to driving speed changes, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the vehicle's tires, preventing the car from moving.
11
2
Share

What are the functions of the multi-function steering wheel buttons in Volkswagen?

The functions of the multi-function steering wheel buttons in Volkswagen are: 1. Resume button: Press RES to restore the previously set speed after temporarily canceling cruise control; 2. Set button: Press SET to set the current speed as the cruise speed after temporarily canceling cruise control; 3. Deceleration button: If adaptive cruise control is activated, use it to reduce speed; 4. Acceleration button: If adaptive cruise control is activated, use it to increase speed; 5. Cruise control on/off button: Press to turn on the cruise control function; 6. Cancel button: Press to cancel the cruise control function; 7. Volume adjustment buttons: Press to increase or decrease volume, with the left button decreasing volume and the right button increasing volume; 8. Bluetooth phone button: Press to answer incoming calls; 9. Voice control button: Press to activate voice commands; 10. Option toggle button: Used to switch between up and down options on the multi-function display; 11. Menu toggle button: Used to switch between left and right options on the multi-function display, press OK to confirm; 12. Track change button: Press to skip to the next or previous track.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.