How to start a Magotan automatic transmission?

2 Answers
DiFaith
07/29/25 5:18pm
To start a Magotan automatic transmission: 1. Enter the vehicle, press the brake pedal, and push the one-touch start button to start the engine; 2. After the vehicle starts, shift the gear to D (Drive), release the electronic parking brake, and then lift the brake pedal. An automatic transmission allows the driver to control the accelerator pedal according to driving needs during operation, automatically shifting into different gears based on engine load and vehicle operating conditions. The Magotan has dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm and a fuel tank capacity of 66 liters. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
Was this review help?
15
4
Share
AaliyahRose
08/14/25 7:58am
When I drive my Magotan automatic transmission, the startup process is simple but requires attention to detail. First, ensure the seat is adjusted comfortably and the gear is in the P position, as this is the safety foundation. Then, firmly press the brake pedal with your right foot, which activates the system. Next, press the start button, and the engine will roar to life. After starting, don’t rush—check if the dashboard displays normally, such as the coolant temperature gauge needle. Wait a few seconds for the engine to stabilize, then gently shift to D gear to prepare for departure. If parked on a slope, remember to engage the handbrake to prevent rolling. After starting, you can also adjust the air conditioning: press the AUTO button and turn the temperature knob to a comfortable value, and the fan speed will adjust automatically. Developing this habit can protect the vehicle and extend its lifespan. I follow this routine every time I start the car to ensure a safe and smooth journey.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What lights to use when driving behind another vehicle at night?

When driving behind another vehicle at night, use low beam headlights. Below are the usage scenarios for other lights: 1. Driving at night on roads without streetlights or with poor lighting conditions: high beam headlights should be turned on. 2. Driving in foggy conditions: fog lights + hazard lights + high beam headlights should be used. 3. Meeting non-motorized vehicles on narrow roads or bridges at night: use low beam headlights. 4. Meeting motor vehicles at night: use low beam headlights. 5. In case of vehicle breakdown or traffic accident at night that obstructs traffic and is difficult to move: switch from high beam to position lights + hazard lights. 6. When passing through sharp curves, arched bridges, slopes, crosswalks, or intersections without traffic lights at night: alternately use high and low beam headlights.
12
4
Share

What is the appropriate amount of fuel to keep in the tank during summer?

The specific amount to add depends on the driving distance. However, in high temperatures, gasoline stored in the fuel tank for too long can easily produce gum and sediment, which may clog the fuel injectors and cause the engine to operate abnormally. Below are specific methods for choosing engine oil for your car: 1. Performance selection: If you prioritize long-lasting performance, you can choose Mobil oil; if you focus on the cleaning properties of the oil for the engine, you can use Shell lubricants; for lubricants with strong oil film toughness, Castrol is recommended. 2. Driving conditions: If you frequently drive in congested areas, have an older vehicle, or operate heavy-duty vehicles for long-distance transport, the viscosity of the lubricant can be appropriately increased. 3. Engine type: Naturally aspirated engines can use mineral oil or semi-synthetic oil. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity, preferably full synthetic oil.
20
4
Share

Is the Newly Replaced Steering Gear Always Heavy?

If other components are functioning properly, the newly replaced steering gear should not feel heavy. Here are the relevant details: 1. Introduction: The automotive steering gear, also known as the steering mechanism or steering box, is the most crucial component in a car's steering system. Its function is to amplify the force transmitted from the steering wheel to the steering linkage and to alter the direction of force transmission. 2. Symptoms of Damage: Unstable driving direction, increased steering wheel play, difficulty in steering wheel return, understeer or oversteer, steering wheel vibration, directional wobbling, heavy steering, and unusual noises from the steering gear. 3. Maintenance Methods: Avoid turning the steering wheel while the car is stationary; steer only after the car is in motion. After parking, return the steering wheel to the central position to avoid bearing unnecessary load.
1
3
Share

Are all new energy vehicles automatic transmission?

New energy vehicles are all automatic transmission, there is no manual transmission, and it is not suitable nor necessary to have manual transmission. The following is the relevant introduction about new energy vehicles: 1. Introduction: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels and adopt new vehicle power devices), integrating advanced technologies in vehicle power control and driving, forming vehicles with advanced technical principles, new technologies, and new structures. 2. Definition: The terminology varies by country. In Japan, they are usually called "low-pollution vehicles". In 2001, the Ministry of Land, Infrastructure, Transport and Tourism, the Ministry of the Environment, and the Ministry of Economy, Trade and Industry of Japan formulated the "Low Pollution Vehicle Development and Popularization Action Plan". The low-pollution vehicles referred to in this plan include five categories: natural gas-fueled vehicles, hybrid vehicles, electric vehicles, methanol-fueled vehicles, and clean gasoline vehicles with the strictest emission and fuel efficiency standards.
20
2
Share

Is It a Big Problem If Water Gets Inside the Car When You Forget to Close the Window During Rain?

Forgetting to close the car window during rain and allowing water to enter can cause drainage holes to become blocked. It can also lead to water seepage inside the car and dampness of items. Here are the steps to handle a waterlogged car: 1. Slow down or stop: When encountering uncertain water accumulation, brake promptly. Do not hesitate while driving. Stop and observe the waterline when trucks or large vehicles pass to determine if you can continue driving. 2. Maintain a slow and steady speed without stopping: If the vehicle has already entered a deep water section, stay calm, maintain a steady throttle to control the speed, and avoid driving too fast. Try not to shift gears or stop during this time, and exit the area as quickly as possible. 3. Post-disaster precautions: Even if the vehicle does not appear severely damaged, it is essential to have it inspected at a repair shop to prevent hidden moisture from causing potential hazards. When the weather clears, open the car doors and place the car in the sun, using a fan to blow air nearby. This can effectively speed up the drying process, and the airflow can also help inhibit mold growth.
6
3
Share

What are the new traffic regulations for vehicle annual inspection?

Vehicle annual inspection regulations are divided into two parts: exemption scope and inspection cycle. Below are the specific details of the vehicle annual inspection regulations: Exemption Scope: The exemption scope for motor vehicles has been expanded from the original 6 years and under for vehicles with 6 seats or fewer to include non-commercial small and mini passenger vehicles with 7-9 seats. This means that after November 20th, non-commercial small and mini passenger vehicles under 6 years old with 7-9 seats can enjoy the exemption policy. Inspection Cycle: Exempt vehicles can skip on-site inspections for the first 6 years, only requiring formalities every two years. From years 6-10, inspections are required annually. The new regulations indicate that the inspection cycle for private vehicles remains unchanged for the first 6 years, but for vehicles aged 6-10, the inspection frequency changes from annual to biennial. This means exempt vehicles will have biennial inspections within 10 years, with only the 6th and 8th years requiring on-site inspections.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.