How to Solve the Persistent Odor in Car Air Conditioning?

2 Answers
MacKennedy
07/25/25 1:25am
Here are the solutions for dealing with odors in car air conditioning: 1. Turn on the air conditioning. 2. Set the temperature to the highest. 3. Adjust the fan speed to the maximum. 4. Maintain this setting for 5-10 minutes. 5. Return to normal usage. Below are the causes of the odor: 1. Frequently setting the air conditioning to the coldest temperature. 2. Always keeping the fan speed at the minimum. 3. Constantly using the recirculation mode. Here are the prevention methods: 1. Avoid setting the air conditioning to the coldest temperature, as it is also harmful to health. 2. When using the air conditioning, keep the fan speed at medium or higher to accelerate airflow around the condenser pipes. 3. Prioritize using the external circulation mode, as the car air conditioning compressor is frequently activated.
Was this review help?
9
1
Share
Juan
08/10/25 4:07pm
I also had a headache when I noticed a strange smell from the air conditioner. Later, I figured out a few practical solutions: The first trick is to turn off the AC cooling button two or three minutes before getting out of the car but keep the fan blowing at high speed. This dries out the moisture in the ducts, preventing mold growth. Don’t be lazy in daily driving—cleaning the dust from the vents after parking is very effective. I use an old makeup brush dipped in alcohol to wipe them. If a rotten smell starts coming out, it’s likely that the cabin air filter has mold, and replacing it at a roadside shop costs around a hundred yuan. The most thorough solution is to get an AC duct cleaning every season change. The technician sprays specialized cleaning foam onto the evaporator—I did it last summer, and there’s been no smell since. Also, a reminder: never spray perfume into the vents—it only makes the odor worse.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the drainage outlet on the door of the Dongfeng Nissan Qashqai?

The drainage outlet on the door of the Dongfeng Nissan Qashqai is located at the bottom of the door, designed to drain water that seeps in from the window. The Dongfeng Nissan Qashqai has a body length, width, and height of 4401mm, 1837mm, and 1611mm respectively, with a wheelbase of 2646mm. The Nissan Qashqai is positioned as a compact SUV, and its wheelbase indicates that the car's space is fairly standard. Taking the 2016 1.2T XE Manual Fashion Edition as an example, it is equipped with a 1.2L turbocharged engine, with a maximum power of 86kw and a maximum torque of 190nm.
4
5
Share

How to Transfer Subject 4 Exam to Local Area?

Cannot transfer back to local area. Schedule exam within 60 days: In principle, you must take the exam at the location where you registered. However, if the vehicle management office cannot arrange the exam within 60 days after scheduling, you can choose to schedule the exam at another test center within the province. Other than this exception, you can only take the exam at the location where you registered. If you wish to take the exam at a different location, you must first cancel your registration at the original location and then re-register at the new location, starting the exam process from the beginning. Any previously passed subject scores will be invalidated. Regulations on the Application and Use of Motor Vehicle Driver's Licenses: If the vehicle management office cannot schedule the Subject 2 or Subject 3 road driving skill exam within 60 days after the applicant's request, the applicant may choose to schedule the exam at another test center within the province (autonomous region, or municipality directly under the central government).
19
4
Share

How to Break in a New Car?

Methods for breaking in a new car: 1. The load should not exceed 75% of the rated capacity; 2. Warm up the engine before starting—it's best to wait until the coolant temperature reaches above 50°C before driving; 3. Choose low-viscosity and high-quality lubricating oil to ensure good lubrication of friction surfaces and reduce component wear; 4. Control the speed—during the break-in period, it's crucial to maintain a moderate driving speed, avoiding excessively high speeds. The recommended speed range is 50 to 80 km/h. The break-in period for a car refers to the initial driving phase after purchasing a new car or undergoing major repairs, typically covering 1,000 to 1,500 kilometers. This phase ensures proper contact, friction, adaptation, and settling of components. During this period, the car's parts adjust to environmental conditions, and surface irregularities on components are smoothed out. Properly breaking in a new car significantly impacts its lifespan, safety, and fuel efficiency.
13
1
Share

What are the reasons for the slow ignition start response of the Magotan?

The reasons for the slow ignition start response of the Magotan include low battery voltage, damaged fuel pump, faulty engine crankshaft position sensor or camshaft position sensor, and lack of cylinder pressure in the engine. Low battery voltage: When the vehicle battery is low on charge, it may result in no response during startup, preventing the starter from functioning. This can be checked by turning on the ignition switch and observing if the dashboard lights dim significantly during startup. If confirmed to be due to a dead battery, jump-starting the vehicle or replacing the battery can resolve the issue. Damaged fuel pump: A faulty fuel pump may prevent fuel from being supplied from the fuel tank for combustion. To diagnose, turn on the ignition switch and listen for the sound of the fuel pump operating inside the vehicle. If no sound is heard, the fuel pump may need replacement. If the fuel pump is not completely damaged, tapping the bottom of the fuel tank with a hard object like an iron rod might temporarily allow the vehicle to start. Besides the fuel pump, issues with the fuel pump control unit or relay could also be the cause. Faulty engine crankshaft position sensor or camshaft position sensor: If either the crankshaft position sensor or camshaft position sensor is damaged, the engine cannot detect the top dead center of the first cylinder, leading to startup failure. In this case, using a diagnostic tool to read the engine fault codes is necessary to identify the issue. Lack of cylinder pressure in the engine: If the engine lacks cylinder pressure, the vehicle will not start. In such cases, further disassembly of the engine is required to determine the exact cause of the problem.
19
0
Share

How to Reset the Oil Maintenance Reminder for the 10th Generation Accord?

To reset the oil maintenance reminder for the 10th Generation Accord, follow these steps: 1. Turn the power mode to the ON position. 2. Use the multi-function steering wheel's left selector to navigate to the maintenance reminder information screen. 3. Press the selector wheel on the left side of the steering wheel to clear the reminder. Taking the 2018 Accord as an example, its body dimensions are: length 4893 mm, width 1862 mm, height 1449 mm, with a wheelbase of 2830 mm. The 2018 Accord is equipped with a 1.5T turbocharged engine, delivering a maximum power of 143 kW and a maximum torque of 260 Nm. The engine reaches its maximum power at 5500 rpm and its maximum torque between 1600 to 5000 rpm. It features a MacPherson strut front suspension and a multi-link rear suspension.
15
0
Share

Can the Engine Start-Stop Be Turned Off?

Engine start-stop can be turned off. The start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when needed to continue moving. Situations where the engine start-stop should be turned off include: 1. Do not use the start-stop system on slopes; 2. Turn off the start-stop system during irregular stop-and-go driving; 3. Disable the start-stop system when the air conditioning is on; 4. Deactivate the start-stop system during low-speed parking; 5. Do not refuel when the start-stop system has shut off the engine; 6. It is recommended to turn off the start-stop system when the fuel warning light is on; 7. The start-stop system must be turned off when driving through water. Conditions for the engine start-stop to activate are: 1. The engine is idling and not in gear; 2. The wheel speed sensors of the anti-lock braking system show zero speed; 3. The electronic battery sensor indicates sufficient energy for the next start.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.