How to Solve Misfire in One Cylinder of a Car?

What Issues Should Be Noted When Buying a Used Electric Vehicle?

When purchasing a used car, the inspection mainly revolves around the vehicle's condition, such as the power battery, electrical system, and other aspects. When selecting a used new energy vehicle, due to its different structure, it is difficult to check the actual condition of some key parts without professional equipment and personnel. Extended information is as follows: 1. Inspection of the power battery: The core of a new energy vehicle's power is the power battery. The quality of the power battery directly affects the vehicle's range. Additionally, since replacing the power battery is very expensive, it is one of the key points during the inspection. 2. Motor, electronic control, and electrical system: A major cause of spontaneous combustion in new energy vehicles is faults in the electrical and electronic control systems. To avoid purchasing a vehicle with safety hazards, it is best to have a comprehensive inspection by a 4S shop, just like with the power battery. 3. Other inspections: For example, whether the steering wheel pulls to one side, whether there are abnormal noises when driving on bumpy roads, and whether the chassis is loose. Additionally, ensuring the completeness of the vehicle's documents is a routine check to rule out major accidents, repaired vehicles, water-damaged vehicles, and to verify the functionality of various vehicle components.

18

2

Share

Does High-Pressure Water Gun Car Washing Damage the Car?

Yes, it does. High-pressure water gun car washing can damage the car paint. When using a high-pressure water gun, excessive water pressure and improper operation can easily cause sand and stones on the car to scratch the surface, leading to abnormal wear of the paint. If the paint is already slightly damaged, the high-pressure water gun can enlarge the damage or even wash away wax, crystal coatings, or protective films. Here are some precautions for car washing: 1. Pre-washing is crucial: Cars often have a lot of dust and mud. Before washing, it's important to add a pre-wash step, which involves using professional equipment to spray a special pre-wash solution on the car body and waiting for one or two minutes. After soaking, most of the dirt will detach from the paint, making it safer to rinse with the water gun. 2. Follow a proper washing sequence: Start with areas that have less dust and mud, such as the roof, hood, and trunk lid. Cleaning from top to bottom helps prevent scratches, and always scrub in the same direction. 3. Choose the right water temperature: After driving for a while, the car is in a high-temperature state, and using cold water to wash it at this time is not advisable. Even if the car hasn't been driven for long but has been exposed to sunlight for a significant time, washing it immediately with cold water can cause the paint to age due to thermal expansion and contraction.

4

1

Share

Where is the QR code for OnStar Smart Rearview Mirror?

In the OnStar-eLite menu on the central control display, clicking this function will bring up the QR code. The OnStar Smart Rearview Mirror is an automotive rearview mirror with an independent operating system and running space program, capable of achieving rich functionalities through wireless networks. Below is relevant information: 1. OnStar: OnStar is a joint venture established by General Motors, SAIC Group, and Shanghai General Motors. Using the OnStar Smart Rearview Mirror, users can install software, games, navigation, and other third-party service provider programs as needed, and can also achieve wireless network access via WiFi or mobile communication networks. In addition to a variety of personalized services, the OnStar Smart Rearview Mirror can also provide intelligent services such as driving recording, GPS positioning, and reverse camera view simultaneously. 2. Special Features: Different from other brands of smart rearview mirrors, the OnStar rearview mirror comes with automatic sensing anti-glare, facilitating drivers during night driving and enhancing driving safety. Three physical buttons are integrated below the rearview mirror, and any of these buttons can directly connect to OnStar voice service.

16

0

Share

Why do large vehicles stop and then start again when turning right?

This is mainly to remind motor vehicles, non-motorized vehicles, and pedestrians behind and to the right of large trucks to maintain a sufficient safe distance when turning right and avoid being too close. Below is an introduction to automatic transmissions for large vehicles: 1. Introduction: Automatic transmission usually refers to the automatic gear-shifting mechanism of a vehicle. 2. Operation: While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. 3. Details: Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L. The most commonly used automatic gear positions are Park (P), Reverse (R), Neutral (N), and Drive (D).

10

2

Share

What Causes the Rattling Noise from the Passenger Side?

This type of rattling noise usually occurs in areas with many plastic components, such as the dashboard or the inner door panels. Especially when driving on uneven roads, the vehicle body may vibrate or slightly twist due to road bumps, causing these internal plastic parts to resonate and produce rattling noises or friction sounds from squeezing against each other. Common causes of car rattling noises: 1. Tire noise: Tire noises are rhythmic, and the frequency increases with speed. A dull "thudding" sound often indicates tire tread deformation, bulging, severe wear, or insufficient air pressure. A "clicking" sound may suggest small stones stuck in the tread. If the tire produces a roaring noise accompanied by noticeable body shaking or steering deviation, it could indicate a tire blowout. 2. Transmission noise: If there is a "grinding" sound from the transmission while driving, which disappears when the clutch is pressed, it suggests a transmission issue, possibly due to worn transmission bearings or gears, or bearing spots.

12

0

Share

Is Car Color Change Film Easy to Remove?

High-quality car color change film is easy to remove. How to identify the quality of color change film: 1. Price: "You get what you pay for" is an eternal market rule. Understand the corresponding prices of color change films at various grades in the market to avoid being deceived. 2. Color: Imported color change films have full and uniform colors, while domestic ones have a strong grainy texture. 3. Feel: The thickness and toughness of the backing paper are directly proportional to the quality of the color change film. Imported films have a fine texture, appropriate thickness, and are less prone to creases; domestic films feel noticeably rough, lack toughness, and creases are hard to recover. 4. Smell: If you can detect a pungent odor when close, it's usually a domestic color change film. Imported films comply with global environmental standards. 5. Adhesive: The adhesive of imported films maintains strong adhesion even after multiple applications and removals, while the adhesive of domestic films shows a noticeable decline in stickiness after just one or two uses.

4

5

Share

How to Solve Misfire in One Cylinder of a Car?

What Issues Should Be Noted When Buying a Used Electric Vehicle?

Does High-Pressure Water Gun Car Washing Damage the Car?

Where is the QR code for OnStar Smart Rearview Mirror?

Why do large vehicles stop and then start again when turning right?

What Causes the Rattling Noise from the Passenger Side?

Is Car Color Change Film Easy to Remove?

What does it mean when the car alarm goes off at 120 mph on the highway?

What are the passing scores for Subject 2, Subject 3, and Subject 4?

At what level of wear should the flywheel be replaced?

Which lane should a car take on a two-lane highway?