How to Set Up the Auto-Lock Function for Vehicles?

2 Answers
LaSavannah
07/24/25 3:54am
Vehicle auto-lock function setup method: 1. Turn on the ignition to power up, but do not start the engine; 2. Press and hold the lock button for about 10 seconds; 3. Upon hearing a beep inside the car or seeing the hazard lights flash twice, turn off the power and then start the engine to complete the setup. The purpose of the auto-lock function is theft prevention, allowing the doors to lock quickly after driving starts to prevent door-pull robberies during traffic jams or at red lights, providing a certain level of security. The auto-lock function also protects child passengers inside the car by preventing young, unaware passengers from opening the door handle while the vehicle is in motion. When the vehicle speed reaches the preset level by the computer, the lock button will automatically engage to prevent accidental door opening.
Was this review help?
11
4
Share
DiConnor
08/10/25 11:28pm
Setting up the auto-lock feature for your vehicle is actually quite simple. Many modern car models come with this function pre-installed, automatically locking the doors while driving to prevent accidental openings. Generally, you'll need to access the vehicle settings menu: first, start the infotainment system and locate the settings option on the central display or dashboard. Then navigate to vehicle settings, security, or the locking-related section. You'll find a toggle to enable auto-lock; select it and set conditions such as locking doors when speed exceeds 15 km/h or when shifting to D gear. If you can't locate it, some vehicles require using the remote key—for example, simultaneously pressing the unlock and lock buttons for a few seconds until you hear a confirmation beep. As an experienced driver, I often help friends adjust this feature. I recommend checking the user manual first, as procedures vary significantly between brands—German cars usually have it in the settings menu, while Japanese models might use key button combinations. After setup, remember to test it: drive a short distance to ensure the doors lock automatically. Don't forget this feature enhances safety by preventing theft through open doors when parked.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What is the size of a 16/70-20 tire?

In a 16/70-20 tire, the number 16 indicates that the section width is 16 inches, and 70 represents that the aspect ratio of the tire section is 70%. The following is a detailed introduction about tires: 1. Explanation of tire model: The model and specifications of a tire are generally marked on the sidewall of the tire, and the information displayed usually includes the tire size, aspect ratio, width, etc. 2. Tire characteristics: Tires usually need to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle. Tires are often used under complex and harsh conditions, and they endure various deformations, loads, forces, and high and low temperature effects during driving, so they must have high load-bearing performance, traction performance, and cushioning performance.
12
1
Share

What does 105w tire mean?

In the 105w on the tire, 105 is the load index of the tire, and the corresponding maximum load per tire is 925KG; w represents the speed rating of the tire, with W indicating a maximum speed of 270km/h. The load index is molded on the sidewall, indicating the maximum load limit of the tire. For driving safety, this load limit must not be exceeded. Overloaded tires may accumulate excessive heat and lead to sudden failure. The definition of the tire load index: It refers to the maximum load that the tire can carry when inflated to the specified pressure. It is usually represented by a number. The definition of the tire speed rating: It refers to the maximum speed allowed for the tire, generally indicated by uppercase English letters and marked on the sidewall of the tire. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters from A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h.
11
5
Share

What does the 12123 public welfare activity point reduction mean?

Learning the law and reducing points through public welfare activities refers to participating in civilized traffic guidance, traffic safety publicity, and other educational activities organized by the traffic safety management department of the public security authorities. To participate in these activities, you need to apply one day in advance. The activity duration is 1 hour, and upon completion, you can have 1 point deducted. Many people are unclear about civilized traffic guidance and traffic safety publicity. Essentially, civilized traffic guidance involves advising pedestrians not to cross the road randomly, correcting uncivilized traffic behaviors of electric bikes and bicycles, and distributing leaflets to passersby. The implementation of public welfare activities not only enhances drivers' initiative in learning road traffic safety laws and regulations but also allows drivers to influence a wide range of road traffic participants through their actions, fostering a good atmosphere for civilized and safe travel and consciously abandoning bad traffic habits. "Learning the law and reducing points" is a measure for licensed drivers who have been penalized with points due to traffic violations. By participating in online traffic safety learning and passing the exam, they can have their points reduced. Motor vehicle drivers who participate in road traffic safety laws, regulations, and related knowledge learning organized by the traffic management department of the public security authorities and pass the exam, or who participate in traffic safety public welfare activities at the place where their driver's license was issued and meet the relevant requirements, can apply for a reduction in traffic violation points. Reduction rules: After receiving traffic safety education as required, motor vehicle drivers who meet the conditions for point reduction can have points deducted from their current accumulated points, with a maximum cumulative reduction of 6 points. However, this cannot be used to reduce points for traffic violations that have not yet occurred.
20
5
Share

Is it necessary to add additives when switching to ethanol gasoline?

Switching to ethanol gasoline does not require additives, as most vehicles can use E10 ethanol gasoline. E10 ethanol gasoline is a blend containing 10% ethanol, which helps reduce exhaust emissions. In regions where the China VI emission standard has been implemented, China VI gasoline, which contains 10% ethanol, is already being supplied. There are two common types of fuel additives: one for cleaning the fuel system and another for removing carbon deposits. Ethanol gasoline is a new alternative energy source formed by blending fuel ethanol, processed from grains and various plant fibers, with regular gasoline in a specific ratio. As a new type of clean fuel, ethanol gasoline is a key focus in the development of renewable energy worldwide. It aligns with domestic energy substitution strategies and the direction of renewable energy development, is technically mature, safe, and reliable, and is fully applicable domestically, offering good economic and social benefits.
2
5
Share

What Data to Look at for Car Power?

Car power is mainly determined by horsepower, torque, 0-100 km/h acceleration time, and top speed. Horsepower refers to the maximum power of the engine, which determines the car's speed, while torque is one of the main indicators of a car's engine and an important standard for measuring the quality of an engine. Torque reflects the car's performance, including acceleration, climbing ability, and suspension. The torque of a car is directly proportional to the engine's power. The shorter the 0-100 km/h acceleration time, the faster the car can start. The top speed of a car refers to the highest speed the car can achieve on a good, level road when fully loaded. These values are usually indicated in the specifications, and the higher the value, the higher the car's top speed.
18
2
Share

How to adjust the time and date on Audi Q7?

Audi Q7 time and date adjustment method: 1. Press the MENU button; 2. After entering, there will be a settings option in the upper left corner of the MMI display; 3. Press the corresponding MMI control panel button; 4. After entering, use the steering wheel up and down buttons to adjust the time; 5. After adjustment, exit to see the time on the dashboard change accordingly. The Audi Q7 is equipped with a self-locking asymmetric dynamic torque distribution differential, with a standard torque distribution ratio of 40:60 between the front and rear axles. The virtual balanced inter-axle load distribution technology makes the rear of the Q7 slightly heavier, giving it a more sporty driving feel, which also lays the foundation for better handling and steering precision.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.