How to Set Up Navigation in the Leiling Luxury Version?

1 Answers
LaCamilla
07/30/25 1:37am
The Leiling Luxury Version does not come with GPS navigation functionality, which is only available in the Technology Version. Owners can use mobile navigation and project the navigation information onto the central control screen using the factory-installed smartphone mirroring feature. Here are some details about the all-new Leiling: 1. Only the Technology Version of the all-new Leiling is equipped with a 12.1-inch multimedia LCD screen, while other models feature a 9-inch screen. The large screen in the Technology Version eliminates traditional physical buttons, with touch-sensitive buttons on either side of the screen only capable of adjusting volume and turning the screen off. All other functions must be accessed via the touchscreen. 2. The navigation system in the new Leiling uses a NavInfo kernel, allowing for handwriting and pinyin input via the touchscreen. The system quickly suggests relevant destination information based on the entered keywords.
Was this review help?
18
2
Share
More Forum Discussions

How to Deal with Foggy Windows in an Audi?

Here are the solutions for foggy windows in an Audi: 1. Proper use of the air conditioning system: After parking the car, turn on the air conditioner, adjust the temperature control button to the warm air direction, and then press the defrost button to use the warm air from the air conditioner to dry the fog on the windshield. When defogging, you can switch the air conditioner to external circulation to allow fresh air from outside to enter the cabin. Setting the compressor and fan speed to 25°C or higher can speed up the defogging process. 2. Use specialized anti-fog products: Before each use, spray evenly on the windows and wipe clean, forming a transparent protective film on the glass to prevent fog formation. One application can last for about ten days to half a month, depending on the product's effectiveness. Summary: Buying anti-fog agents is a convenient but short-term solution with limited cost-effectiveness. 3. Open windows for air convection: If the fog is not heavy, you can open a small gap in the side windows to allow air convection inside the car. This will gradually equalize the temperature inside and outside the car, causing the fog to dissipate. The advantage is that it achieves the effect of using the air conditioner without increasing fuel consumption. However, during severe cold or rain, it is recommended to intermittently open and close the windows. 4. Use dish soap with a dry cloth: Mix dish soap with water (ratio of 1:6), apply evenly to the interior glass with a sponge, and wipe dry with a car towel after it dries, leaving no watermarks.
4
5
Share

Must Vehicle Transfer Be Processed at the Local DMV Where the License Plate Was Issued?

To process a vehicle transfer, both parties involved and the vehicle must appear together at the local DMV where the vehicle is currently registered. Vehicle transfer cannot be processed in a different location. Documents required for vehicle transfer: Vehicle license, vehicle registration certificate, vehicle registration supplementary form (obtained from the local DMV where the vehicle is registered, requires ID card, vehicle license, and road maintenance fee certificate), vehicle purchase tax certificate, ID cards of both buyer and seller, and the transaction vehicle must be present. If the buyer is not a local resident, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year. The vehicle license and original ID cards of both parties must be presented. Non-local residents must also provide a local residence permit. Before the transfer, all vehicle violations and accidents must be resolved, and all vehicle documents must be complete. Documents required from the original owner for a used vehicle transfer include: registration certificate, vehicle license, and ID card. The buyer must provide an ID card, and if not a local resident, a residence permit or temporary residence permit is required. Vehicle transfer first requires a vehicle evaluation. The evaluation fee is generally 1%-2% of the evaluated vehicle price, and other fees include license plate and vehicle license costs. The original owner's commercial insurance can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. Precautions when buying a used car: Incomplete documentation. Complete documentation for a used car includes: vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax payment certificate, road maintenance fee documentation, and compulsory insurance. Missing vehicle registration certificates or vehicle licenses, or unpaid compulsory insurance or road maintenance fees, can cause endless trouble for the buyer. Therefore, if the seller cannot provide complete documentation, the buyer should be especially cautious. Tampering with the odometer. Most consumers rely on the odometer to judge a vehicle's condition, and sellers often take advantage of this by tampering with the odometer. The odometer is not just a record of usage but also an indicator of when other vehicle components were repaired or replaced. If the buyer follows the maintenance schedule based on a tampered odometer, it can lead to a series of potential safety hazards. New paint covering 'external injuries.' When buying a used car, if the car has been repainted and there are signs of repair around the front, rear, or A, B, and C pillars, the car may have been in a major accident. 'Tuning the heart' to raise the price. Many buyers focus too much on the car's 'heart' (engine) and overlook the health of the car body. Sellers take advantage of this by replacing engine components to make the 'heart' appear younger and thus raise the price.
15
5
Share

Why is the power take-off light always on?

The power take-off light staying on indicates that the power output device is in operation. Here is a detailed introduction to the power take-off: 1. Composition: The power take-off is one or more sets of transmission gears, generally consisting of a gearbox, clutch, and controller. It is mainly connected to the low gear of the transmission or the output shaft of the auxiliary box to effectively transmit power to external working devices. 2. Function: It adopts a remote control system and is equipped with pneumatic and hydraulic control devices. The engagement and disengagement of the power output can be achieved by lightly touching the switch on the dashboard in the cab.
12
2
Share

How to Wash a Car with Paint Protection Film Normally?

Here are the methods for washing a car with paint protection film normally: 1. Cleaning frequency: Wash the car regularly, once a week is sufficient, and it doesn't need to be too frequent. Do not wash the car within one week after applying the film. Dirt can be wiped clean with a soft, fine towel and water. Corrosive contaminants (such as oil stains, dyes, bird droppings, etc.) should be cleaned as much as possible within 24 hours. 2. Precautions: Avoid directly spraying water at the edges with a high-pressure water gun to reduce the chance of peeling. Do not use unclean water for cleaning. Do not use cleaning agents with acid or alkaline corrosion to clean the paint protection film.
18
1
Share

Is Audi a Lower Tier Than Mercedes-Benz and BMW?

Audi is not of a lower tier than Mercedes-Benz and BMW. Here is an introduction to Audi: 1. Introduction: Audi is a renowned automobile developer and manufacturer, with its logo featuring four interlocking rings, symbolizing the merger of Audi with DKW, Horch, and Wanderer to form the Auto Union. It is a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Main Models: The main models include Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S and RS performance series.
19
2
Share

What are the effects of excessive road water accumulation on vehicles?

If the water level exceeds half of the tire height, do not force your way through as this can easily cause water to enter the exhaust pipe, leading to severe engine damage. Below are some wading techniques: 1. Follow the vehicle ahead: If a similar type of vehicle can pass, then you can too. 2. Assess the water condition: Areas with waves and whirlpools likely have large rocks or other obstacles, while calm surfaces usually indicate deeper water. Places with uniform small waves typically have a smoother road surface underneath, making them the best choice for crossing. 3. Determine water depth: If the water level is above the exhaust pipe, there is a risk of stalling and water ingress. Increase the distance from the vehicle ahead, and if an unexpected situation arises, turn around immediately.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.