How to Set the Time on Wuling Hongguang?

1 Answers
GabriellaAnn
07/29/25 12:58am
To set the time on the Wuling Hongguang, follow these steps: 1. Press and hold the clock button until you hear a beep, then release the button; 2. The time display will start flashing. To set the hour, press and hold the preset button (h) until the hour increments to the desired time; 3. To set the minutes, press the (m) button, following the same principle as setting the hour. Press the clock button to confirm the set time. Taking the 2020 Wuling Hongguang as an example, it is a microvan with the following dimensions: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, fuel tank capacity of 50 liters, and a curb weight of 1185kg.
Was this review help?
7
5
Share
More Forum Discussions

Which country is Lotus Cars from?

Lotus Cars are categorized as follows: 1. British Lotus (also known as Lotus Cars). Lotus is a world-renowned manufacturer of sports cars and racing cars. Headquartered in Hethel, Norfolk, UK, it was founded by Colin Chapman in 1948. Currently, it is under the ownership of Malaysia's Proton (Porton) Motors and was introduced to China in 2011. 2. China's Youngman Lotus. China's Youngman Automobile Group is a comprehensive automotive industrial group that produces and sells NEOPLAN buses, MAN heavy trucks, Lotus cars, and automotive components.
15
4
Share

How to Use the Interior and Exterior Circulation in the Cavalier

The usage instructions for the interior and exterior circulation in the Cavalier are as follows: 1. The Cavalier typically operates with the interior circulation turned on. Only in areas with good air quality, such as the countryside, should the exterior circulation be activated to refresh the air inside the car. 2. The exterior circulation works by using a fan to draw outside air into the car and expel the interior air outside, achieving ventilation without opening the windows. The interior circulation simply recirculates the air inside the car, especially useful in winter when heating is on and in summer when cooling is on, to promote air circulation within the vehicle. 3. In summer, the air conditioning system relies on the compressor, so the AC button must be turned on, followed by the air conditioning. This results in higher fuel consumption when the air conditioning is in use. When the interior temperature is higher than the exterior temperature, the windshield may fog up. In this case, activating the exterior circulation can help defog the windshield. 4. In winter, the car's heating system utilizes the heat generated by the engine during operation. The engine's cooling is managed by the radiator, so the AC button does not need to be turned on to warm up the car. The correct approach is to let the car warm up for a while after starting, then turn on the heating once the water temperature rises. Initially, set it to exterior circulation to expel the cold air inside, then switch to interior circulation to warm up the car's interior.
17
0
Share

What Type of Suspension Does the Tacqua Use?

Tacqua uses a MacPherson strut independent suspension for the front suspension and a torsion beam non-independent suspension for the rear suspension. Here is some extended information on suspension types: 1. The MacPherson strut independent suspension is the most widely used suspension in the automotive world today. It mainly consists of a coil spring, shock absorber, and triangular lower control arm. Compared to other types of suspensions, this type has a relatively simple structure, smaller size, and occupies less space, making it more flexible in later use. 2. The torsion beam non-independent suspension is not very widely used in cars because this type of suspension is relatively rigid. 3. The torsion beam non-independent suspension connects the two rear wheels of the car to a single axle. While driving, if the car travels on a rough road, fluctuations on one side of the rear wheels will also cause fluctuations on the other side, affecting the comfort of the car.
12
1
Share

Where is the cabin air filter of Kaiyi C3 located?

The cabin air filter of Kaiyi C3 is located in front of the front passenger seat. The main functions of the cabin air filter are as follows: 1. It can make the air filter fit tightly to the housing to ensure that unfiltered air does not enter the cabin. 2. It can separate solid impurities such as dust, pollen, and abrasive particles in the air. 3. It can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., in the air and has strong and long-lasting moisture adsorption capabilities. 4. It can provide fresh air to the cabin, prevent passengers from inhaling harmful gases, ensure driving safety, and effectively sterilize and deodorize. 5. It can ensure clean air in the cabin without breeding bacteria, creating a healthy environment; it can effectively separate solid impurities such as dust, core powder, and abrasive particles in the air; it can effectively intercept pollen, ensuring that drivers and passengers do not have allergic reactions that affect driving safety.
19
1
Share

How to Adjust the Headlight Height of the Murano?

Murano headlight height adjustment method is as follows:1. Turn on the high beam, stand in front of the headlight with your feet vertically as close to the headlight as possible, observe the position where the high beam shines on your feet, take the light center as the reference point, and remember it. 2. Then move vertically to the wall and mark the position of the light center on the wall according to the position on your feet. 3. Use a screwdriver to rotate the headlight's scale gear, making sure the light center shines on the marked position on the wall, with the horizontal distance not exceeding 10 cm. 4. When adjusting the lights, if there is no one else in the car, you can slightly raise the light center because an empty car is higher; when people sit in, the car will sink a bit, so adjusting the light slightly higher leaves some margin. 5. When adjusting left and right, you will notice the light center moves significantly, but when adjusting up and down, the movement is less obvious. If you don't see the light center moving up or down, don't worry, just keep turning the screwdriver until the light center shines on the marked position. 6. After both lights' centers are aligned with the marks, stand in front of the car and observe the light beam emitted by the headlights. It's easy to see at night with the high beam on—check if it's straight forward, as there might have been some deviation when marking the wall. If everything looks good, the adjustment is complete.
19
4
Share

What does negative offset wheel mean?

Negative offset wheel refers to the numerical value of the wheel's center offset, which represents the deviation distance from the wheel's midline to the mounting surface of the wheel hub. Therefore, if the mounting surface of the wheel hub deviates further from the wheel's center line with a larger negative value, the wheel will protrude more outward when installed on the vehicle. When the wheel's load surface is inside the center reference plane, the wheel is considered a negative offset wheel. The advantage of negative offset wheels is that they widen the wheel track, providing better stability for the vehicle and enhancing the lateral support capability of high-performance tires. However, negative offset wheels typically protrude beyond the vehicle body, which can cause additional air resistance and are more prone to scraping against external objects.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.