Murano headlight height adjustment method is as follows:1. Turn on the high beam, stand in front of the headlight with your feet vertically as close to the headlight as possible, observe the position where the high beam shines on your feet, take the light center as the reference point, and remember it. 2. Then move vertically to the wall and mark the position of the light center on the wall according to the position on your feet. 3. Use a screwdriver to rotate the headlight's scale gear, making sure the light center shines on the marked position on the wall, with the horizontal distance not exceeding 10 cm. 4. When adjusting the lights, if there is no one else in the car, you can slightly raise the light center because an empty car is higher; when people sit in, the car will sink a bit, so adjusting the light slightly higher leaves some margin. 5. When adjusting left and right, you will notice the light center moves significantly, but when adjusting up and down, the movement is less obvious. If you don't see the light center moving up or down, don't worry, just keep turning the screwdriver until the light center shines on the marked position. 6. After both lights' centers are aligned with the marks, stand in front of the car and observe the light beam emitted by the headlights. It's easy to see at night with the high beam on—check if it's straight forward, as there might have been some deviation when marking the wall. If everything looks good, the adjustment is complete.
