How to set the time on a Kia K4?

1 Answers
AmeliaDella
07/25/25 12:47pm
The method to set the time on a Kia K4 is: 1. Press and hold the CLOCK button until the time flashes; 2. Use the up and down buttons to adjust the time, then press the CLOCK button again to complete the setting. The time displayed on the car's dashboard is only an auxiliary function and does not have high precision, but once you master the adjustment method, you can easily correct any discrepancies. The Kia K4 is a mid-size sedan under Dongfeng Yueda, with dimensions of 4720mm in length, 1815mm in width, and 1465mm in height, and a wheelbase of 2770mm. The vehicle comes standard with features such as headlight adjustment, front fog lights, LED turn signals on the exterior mirrors, frameless wipers, high-mounted brake lights, dashboard brightness adjustment, trip computer, and trunk lighting.
Was this review help?
10
5
Share
More Forum Discussions

What Causes Abnormal Noise from the Accelerator Pedal?

Abnormal noise from the car's accelerator pedal is mainly caused by the following reasons: 1. Carbon buildup in the throttle causing sticking—clean the throttle. 2. Wear on the accelerator pedal pivot pin—applying grease can solve the issue; if not, replace it. 3. Poor installation of the accelerator cable. For electronic throttle systems, check the accelerator pedal mechanism and the accelerator pedal sensor. Precautions for operating the accelerator pedal: 1. Avoid using excessive throttle when starting an unloaded vehicle; a light throttle is recommended. For loaded starts, a moderate throttle is advisable. 2. Set the throttle to an appropriate position during startup to reduce wear on mechanical parts. 3. Avoid sudden acceleration while driving. To increase engine speed, gradually apply more throttle to ensure a smooth rise in engine RPM.
6
0
Share

Which country produces Lamborghini?

Lamborghini is an automobile brand. The relevant information about Lamborghini is as follows: Introduction to the Lamborghini logo: Its emblem is a bull, full of strength and ready to charge. It is said that this emblem reflects the founder Lamborghini's unyielding and bullish temperament, while also aligning with the company's high-performance, high-speed sports car characteristics. This bull, brimming with power and poised to charge, symbolizes the unbeatable horsepower, speed, and dominance of the racing cars produced by the Italian Lamborghini company. This Italian-blooded bull represents luxury sports cars whose reputation in Europe and America is no less than Ferrari's prancing horse. Lamborghini models: There are currently three models: Aventador, Urus, and Huracán.
15
2
Share

What does EV mean in cars?

EV in cars refers to hybrid electric vehicles. The main advantages of hybrid electric vehicles are as follows: 1. With hybrid power, the maximum power of the internal combustion engine can be determined based on the average required power. This allows the engine to operate under optimal conditions with low fuel consumption and minimal pollution. When additional power is needed and the internal combustion engine is insufficient, the battery can supplement it. When the load is light, the excess power can be used to charge the battery. Since the internal combustion engine can operate continuously and the battery can be constantly charged, the range is the same as that of a conventional car. 2. Energy recovery is very convenient. 3. In busy urban areas, the internal combustion engine can be shut down, allowing the vehicle to be driven solely by the battery, achieving "zero" emissions. 4. It addresses the challenges faced by pure electric vehicles. 5. It can utilize existing gas stations for refueling, eliminating the need for additional investment. 6. It helps maintain the battery in good working condition, preventing overcharging or over-discharging, thereby extending its lifespan and reducing costs.
1
4
Share

How to Check if the Throttle Body Needs Cleaning?

Acceleration is slow, idle speed is unstable, and power decreases. These fault phenomena indicate that the throttle body is too dirty and needs cleaning. Here are the methods to determine if the throttle body needs cleaning: 1. When the tachometer is unstable at idle speed, fluctuating up and down, it means the throttle body is too dirty and requires cleaning. 2. For any fuel-injected vehicle, when the engine is under no load, in neutral, rev the throttle to 3000 RPM and then suddenly release it. Observe the tachometer needle: if it quickly drops to 1000-1200 RPM, pauses slightly, and then drops to around 800 RPM in a fast and direct manner, it indicates the throttle body is slightly dirty but still does not need cleaning. If the needle drops quickly and directly below 800 RPM or even 700 RPM, then slowly rises back to around 800 RPM, with the idle speed fluctuating from low to high, it means the throttle body is severely dirty and requires immediate cleaning.
8
5
Share

What Causes Normal Low Pressure but Low High Pressure in a Car's Air Conditioning System?

Normal low pressure but low high pressure in a car's air conditioning system is caused by a malfunction or damage to the air conditioning compressor. This type of fault generally requires replacing the compressor with a new one. In a vapor-compression refrigeration system, the compressor is one of the main components. Its role is to pressurize gaseous refrigerant and then send it to the condenser for cooling and condensation. Below are the main reasons that can lead to compressor damage: 1. The air conditioning system is unclean, with particulate impurities being sucked into the compressor. 2. Excessive refrigerant or lubricating oil in the system, causing "liquid slugging" and damaging the compressor. 3. The compressor operates at excessively high temperatures or for too long. 4. The compressor lacks oil, leading to severe wear. 5. The compressor's electromagnetic clutch slips, causing excessive friction and high temperatures. 6. The compressor's power configuration is too small. 7. The compressor has manufacturing quality defects.
2
5
Share

What Are the Reasons for Engine Oil Loss in a Car?

The reasons for engine oil loss in a car: 1. Damage to the engine's turbo system, which can consume a large amount of oil. 2. Failure of the engine's cylinder head gasket. 3. Damage to the engine's piston rings. 4. Impact on the oil pan leading to oil leakage. Oil shortage is a serious issue; if not repaired promptly, it can cause the engine to be scrapped. Below are some related preventive measures: 1. Use high-quality engine oil. Engine oil is highly susceptible to corrosion and aging under prolonged high temperatures, causing the oil film to thin and making it easier to enter the combustion chamber and participate in combustion. Therefore, using high-quality engine oil can significantly delay this phenomenon. 2. Pay attention to the cleanliness of the fuel system. During the combustion process, fuel inevitably produces carbon deposits, which are the root cause of some car problems, such as aging of valve seals and increased piston-cylinder wall clearance. These issues are directly or indirectly related to carbon deposits. Therefore, maintaining the cleanliness of the fuel system is very helpful in preventing oil burning.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.