···
Log in / Register

How to set the ix35 to automatically fold mirrors when locking the car?

6Answers
OAdeline
08/27/2025, 10:42:01 PM

Turn on the car, and the owner should continuously press the leftmost button on the multifunction steering wheel to open the settings interface on the central console. In the settings interface, find the vehicle settings, enter the interface, select vehicle settings, choose central door lock, and proceed to the next step. In the vehicle settings, open the mirror settings and check the option for automatic mirror folding. You can also use the remote control switch. When the owner turns off the engine, the vehicle's mirrors, which have been set up, will automatically fold in.

Was this review help?
106
Share
DelBrianna
09/09/2025, 04:05:18 AM

The automatic mirror folding feature when locking the Hyundai ix35 mainly depends on the configuration and setup method. My 2020 model comes with power folding mirrors - just access the settings menu via the multifunction steering wheel buttons, select convenience functions in vehicle settings, and check the "auto-fold mirrors when locking" option. Base models may lack this feature and require installing a folding module. For older models, find the body control option in the infotainment system settings and enable similar mirror-linked folding functions. After locking, observe if the mirrors move - no response may indicate a blown fuse or wiring issue. Always check the owner's manual to confirm configuration support before attempting modifications to avoid unnecessary efforts.

Was this review help?
8
Share
Expand All
VanOlivia
10/23/2025, 10:09:24 PM

Setting up the automatic mirror folding feature for the ix35 is actually quite simple. First, you need to confirm that your vehicle model has the power folding function. If not, you'll have to visit a modification shop to have it installed. Last time I helped a friend with a 2018 high-end model, we accessed the system through the menu button on the left side of the steering wheel, found the door lock settings, and enabled the automatic mirror folding. For newer models, you can also trigger the folding by pressing the lock button on the key twice consecutively. Be careful not to fold and unfold the mirrors frequently in rainy weather, as moisture can get into the motor and cause it to jam. If the setting doesn't take effect, it might be due to loose wiring connectors or the need to update the body control module program at a 4S shop.

Was this review help?
7
Share
Expand All
DelElliott
12/06/2025, 09:33:03 PM

Setting up automatic mirror folding for the ix35 involves three steps: First, check if your vehicle configuration includes power-folding mirrors. Second, access the vehicle settings menu (usually found on the central display or instrument cluster menu). Third, locate and enable the mirror folding option. Some older models may require activation of hidden features using a diagnostic computer. When setting up, it's recommended to open the driver's window to test the effect and avoid pinching injuries. If the folded mirrors are impacted, they will automatically rebound to protect the motor. For vehicles without this feature, installing a folding module costs approximately 500 yuan, but since it involves wiring modifications, professional installation is advised.

Was this review help?
1
Share
Expand All
DePenelope
01/26/2026, 10:48:25 PM

As an ix35 owner sharing experience: For models with power folding, select 'Vehicle' or 'Convenience Features' in the central display settings, then enable automatic mirror folding. For key remote folding, press the lock button twice consecutively. If your model lacks this feature, you can purchase an OBD module and plug it into the interface under the steering wheel to enable it. Note: Do not manually force the mirrors to fold when retracting, as this can damage the gear teeth. In northern winters, mirrors may freeze; it's advisable to disable this function if unused for extended periods. After setup, test repeatedly - sometimes unsecured doors may cause folding failure.

Was this review help?
8
Share
Expand All
DelBennett
04/22/2026, 03:57:51 AM

The mirror folding feature on the Hyundai ix35 when locking the vehicle primarily depends on whether the power folding function is activated. The typical operation path is: Central Control Screen → Settings → Vehicle → Door Locks & Mirrors → Enable Auto Fold. Some model years require accessing this setting through the steering wheel menu's vehicle settings. Holding the lock button on the key fob for 3 seconds can also trigger the folding. For aftermarket modifications, it's recommended to choose vehicle-specific folding modules to avoid voiding the wiring warranty. From my personal experience, enabling this function caused mirror squeaking, which was resolved by applying lubricant at the dealership. Additionally, water ingress can easily damage the folding motor, so it's best to disable this feature during car washes.

Was this review help?
18
Share
Expand All
More Q&A

What transmission does the Roewe RX5 use?

The transmission of the Roewe RX5 is a product of collaboration between SAIC, General Motors, and BorgWarner, and it is manufactured in China. The Roewe RX5 is equipped with a 7-speed wet dual-clutch transmission and a 6-speed manual transmission. The 7-speed dual-clutch transmission features seven forward gears and utilizes a wet clutch. The wet dual-clutch transmission consists of two sets of multi-plate clutches (one large and one small) mounted coaxially within a sealed oil chamber filled with hydraulic fluid. This design offers better adjustability and higher heat resistance, enabling it to handle higher torque. When using the Roewe RX5's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for too long. Prolonged neglect can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. While some experienced drivers may coast in neutral with manual transmissions, doing so in an automatic transmission can cause overheating and jerking when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse prematurely to showcase "smooth" driving, but this can severely damage the transmission gears, leading to issues like gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmissions may overheat under heavy load or shift too early, causing a lack of power. Use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck and move the vehicle onto the tow platform while in Neutral (N). Avoid using tow ropes or direct towing with another vehicle.
107
Share

How many people can a sedan accommodate?

A sedan can accommodate 5 people including the driver. Introduction to passenger capacity limits for sedans: A standard sedan can seat 5 people, as long as it does not exceed the approved passenger capacity. Different vehicle models have varying passenger capacities, so it's essential to check the approved passenger limit specified in the vehicle's documentation. According to Article 55, Clause 1 of the Road Traffic Safety Law Implementation Regulations, passenger vehicles on highways must not exceed the approved passenger capacity, excluding children who are exempt from tickets as per regulations. When the passenger capacity is full, the number of exempt children must not exceed 10% of the approved passenger capacity. Penalties for overloading: Most private cars have a passenger limit of 5 people. Carrying even one additional person constitutes a 20% overcapacity violation, which can result in severe penalties if not careful. Overloading by more than 20% results in a 6-point deduction on the driver's license and a fine.
111
Share

What is the reason for failing the high-low beam alternation in Subject 3?

It may be due to completing the operation before the instruction playback has finished. Below are some tips for the Subject 3 driving test: 1. Follow the instructions: Listen carefully to the voice prompts during the Subject 3 test and act accordingly. Be sure not to perform any actions before the voice prompt ends; always wait until the prompt is complete before proceeding to the next step. 2. Pay attention to special zones: In many areas, the voice prompts no longer remind candidates about special zones such as school areas, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding actions based on roadside signs and road markings. For school zones, apply the brakes 10 meters before the sign, keeping the speed below 30 km/h. For bus stops, apply the brakes 10 meters before the sign, also keeping the speed below 30 km/h. For crosswalks, decelerate by applying the brakes within 30 meters before the crossing, and stop if pedestrians are passing.
112
Share

What kind of gloves to wear for the driving test?

There are no specific glove requirements for the driving test; disposable gloves are acceptable. Drivers wear gloves primarily for better grip, as steering wheels are often smooth and can become slippery when hands sweat after prolonged use. However, wearing gloves is not recommended. While gloves may protect your hands, they can compromise overall safety by increasing the risk of slippage during steering, especially in sharp turns, which may lead to insufficient steering control and potential accidents. For the driving test, you only need to bring the following documents: the applicant's ID and a medical certificate issued by a county-level or military regimental-level medical institution. Applicants for a disabled-adapted small automatic passenger vehicle must submit a medical certificate from a specialized medical institution designated by the provincial health authority. Special cases for the driving test: Individuals holding a military or armed police force driver's license who apply for a civilian driver's license must complete an application form and submit the required documents. After verification, they may be exempt from the C-license test.
104
Share

Where is the transmission fluid level inspection hole of the Volkswagen CC?

The transmission fluid level inspection hole of the Volkswagen CC is located on the top of the transmission. When checking the transmission fluid, first preheat the oil to about 50 degrees Celsius, then move the gear lever through each gear position and pause for a few seconds in each. At this point, check the dipstick to ensure the fluid level is between the maximum and minimum lines. Below is some relevant information about transmission fluid: 1. Transmission fluid is an oil product used to keep the gear system clean, ensuring the transmission operates normally and extending the lifespan of the transmission components. Failure to replace the transmission fluid regularly can lead to: impurities forming due to chemical changes in the transmission fluid, blocking the oil passages and affecting gear shifting functionality. Prolonged high-temperature operation reduces the lubricating properties of the transmission fluid, increasing the risk of clutch plate wear and causing stalling. 2. It is important to note that replacing transmission fluid involves more than just the fluid itself; two other components also need to be replaced or maintained. One is the transmission fluid filter, which, similar to an oil filter, removes impurities from the lubricating oil. The second is cleaning the transmission oil pan. If possible, remove the oil pan to clean out the thick layer of sludge, which often contains metal shavings. If not cleaned properly, even with new transmission fluid, the effectiveness will be significantly reduced. Additionally, when reinstalling the oil pan, always replace the sealing gasket to ensure a proper seal.
108
Share

What are the performance differences between the CR-V and the Envision S?

The comparison between the CR-V and the Envision S is as follows: Different manufacturers: The CR-V is manufactured by Dongfeng Honda; the Envision S is manufactured by SAIC-GM Buick. Different engines: The CR-V is equipped with a 1.5T L4 engine; the Envision S has a 2.0T L4 engine. Different maximum horsepower: The CR-V has a maximum horsepower of 193 ps; the Envision S has a maximum horsepower of 237 ps. Different maximum torque: The CR-V has a maximum torque of 243 Nm; the Envision S has a maximum torque of 350 Nm. Different transmissions: The CR-V has a 6-speed manual transmission; the Envision S has a 9-speed automatic transmission.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.