How to Set the Horn Sound When Locking a Honda Accord?

1 Answers
DeDelilah
07/29/25 10:54pm
Honda Accord locking horn sound setting method is: 1. Open the car door and enter the vehicle; 2. Close the door and start the car; 3. Within 8 seconds, press the central locking lock button; 4. Press it 3 times, about once per second. If the horn sounds once, the locking beep prompt is activated. Taking the Accord 2018 230TURBO Comfort Edition as an example, the car has a length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. This model is equipped with a 1.5L turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 143 kW and a maximum torque of 260 Nm. It features front-wheel drive, with a MacPherson strut front suspension and a multi-link independent rear suspension.
Was this review help?
11
4
Share
More Forum Discussions

Is the ippf car wrap imported?

ippf car wrap is imported. Here are the maintenance methods for the invisible car wrap: 1. Do not use high-pressure water guns: You can wash the car normally one week after the invisible car wrap is applied, but do not use a high-pressure water gun to strongly spray the seams of the invisible car wrap; to avoid problems such as glue opening and edge lifting. 2. Avoid contact with the car paint: If the invisible car wrap is stained with oil or difficult-to-remove stains, you can first use a tar remover cleaner, and for stubborn stains, it is recommended to use 99% isopropyl alcohol or paint thinner to remove the stains. Be careful to avoid contact with the car paint when using these products. 3. Keep the film surface clean: The market offers car wax that enhances brightness.
5
5
Share

Is the Golf GTI four-wheel drive?

The Golf GTI is not four-wheel drive; it is a front-wheel-drive hot hatch. Here are some relevant details: 1. The Golf GTI is equipped with a 2.0-liter turbocharged engine, which delivers a maximum power of 162 kW and a maximum torque of 350 Nm. The engine reaches its peak power at 4500 to 6200 rpm and its peak torque at 1500 to 4400 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 2. The Golf GTI's front suspension employs a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. Independent suspension enhances wheel contact with the road, thereby improving grip.
18
4
Share

What car is the Volkswagen Magotan?

Volkswagen Magotan is a mid-size car under the Volkswagen Group, known as "Maiteng" in Chinese. According to FAW-Volkswagen, "Mai" symbolizes confidence, decisiveness, and dynamism, while "Teng" represents soaring, surpassing, and passion. Additional relevant information is as follows: 1. The Magotan adopts the latest family design language in its exterior design, with straight lines visually expanding the body and creating a fashionable and sporty atmosphere. 2. In terms of power, both models offer a choice between 1.4T and 2.0T engines. 3. The configuration is also very rich: standard keyless entry system, dual-zone air conditioning, interconnected multimedia system, panoramic sunroof, etc.
17
3
Share

How Many Cylinders Does the Jinjila 300 Have?

It features a relatively rare V-twin configuration. Below is an introduction to the Jinjila 300: 1. Powertrain: The powertrain utilizes a domestically scarce V-twin, liquid-cooled, 8-valve engine with an actual displacement of 298cc. It delivers a maximum power of 22.5kW at 8,500 rpm and a maximum torque of 25.3Nm at 7,000 rpm, paired with a 6-speed transmission and a Delphi fuel injection system. This slightly outperforms its competitor, the Qingqi KRGV300S, which has a maximum power of 22kW. 2. Dimensions: The vehicle measures 2,120mm in length, 836mm in width, and 1,050mm in height, with a wheelbase of 1,420mm, ground clearance of 158mm, and a seat height of 690mm.
2
0
Share

What Causes Frequent Burnout of Electric Vehicle Chargers?

Short circuits in the charger output line or internal short circuits between the battery's positive and negative terminals. Below is relevant information about electric vehicle chargers: 1. Charging Operation: When charging, first connect the battery, then plug in the power supply. After charging is complete, first disconnect the power supply, then unplug the battery. If the battery plug is removed first during charging, especially when the charging current is high (indicated by a red light), it can easily damage the charger. 2. Classification: Common switch-mode power supply chargers are divided into two main categories: half-bridge and single-ended. Single-ended chargers are further classified into forward and flyback types. Half-bridge chargers are more expensive but perform better, often used in chargers with negative pulse functionality. Single-ended chargers are more cost-effective and have a higher market share.
12
3
Share

What are the body dimensions of the Odyssey?

The Odyssey has a length, width, and height of 4847mm, 1820mm, and 1702mm respectively, with a wheelbase of 2900mm. Below is relevant information: 1. The 4847mm body length gives the car a sleek and elongated appearance, with smooth and elegant lines. The irregular waistline design adds a youthful and fashionable touch. The air intakes on both sides below the front bumper also feature a new style, enhancing the visual appeal. 2. The Odyssey Hybrid is equipped with a 2.0L third-generation i-MMD dual-motor hybrid system, which includes a 2.0L Atkinson-cycle DOHC i-VTEC engine, two electric motors, and an electric CVT. It delivers a maximum output power of 158kW and a peak torque of 315Nm, achieving an ultra-low fuel consumption of 5.8L/100km and offering a total driving range of over 750 kilometers.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.