How to set the automatic locking for Trumpchi GS4?
4 Answers
To set the automatic locking function for the Trumpchi GS4, follow these steps: 1. Visit a 4S dealership to use a specialized computer for body controller settings, adjusting via codes; 2. After adjustment, ensure all doors are closed and turn the ignition to the ON position; 3. Press the central locking button for more than 5 seconds until the hazard lights flash twice. Taking the Trumpchi GS4 2021 270T Manual Comfort Edition as an example, it is equipped with a 1.5T 169-horsepower L4 turbocharged engine, paired with a 6-speed manual transmission. Its body dimensions are: length 4545mm, width 1856mm, height 1668mm, with a wheelbase of 2680mm.
I remember setting the auto-lock feature for my Trumpchi GS4 in the vehicle settings menu. First, start the engine, then locate the vehicle settings icon on the central control screen. After entering, you can find options like body control or safety settings, where the auto-lock function is located. Check the enable option, and you can also set the speed at which the doors automatically lock—I chose 20 km/h. The setup is extremely simple, taking only two to three minutes in total, and no tools are required. This feature is particularly practical, especially when traveling with children, as the doors lock automatically once the car starts moving, eliminating worries about kids accidentally touching the door handles. The location might vary slightly depending on the model year; mine is a 2021 model.
To set the automatic locking for the Trumpchi GS4, follow these steps: With the vehicle powered on, locate the gear-shaped settings icon on the central display screen. Enter the vehicle control menu and select the body settings, where you will find a switch for automatic locking while driving—simply turn it on. Some higher-end models also allow adjusting the locking speed value, with the factory default set at 20 km/h. Note two things during operation: the vehicle must be in the ON position, and it's best to ensure all four doors are closed before setting. After setup, it's advisable to test it by driving out; when the speed exceeds 20 km/h, listen for the click sound from the door locks to confirm it's working. This feature significantly enhances driving safety, preventing outsiders from opening the doors while waiting at traffic lights. Older models may require accessing the diagnostic port to program the feature, while newer models generally allow direct setup via the vehicle's system.
Here's how I set up the automatic locking for the Trumpchi GS4: After powering on the car, use the up and down buttons on the steering wheel to bring up the dashboard menu. Scroll to the settings option and press the confirm button to enter the submenu, then look for vehicle safety-related settings. Among them is the speed-sensing automatic locking function, which can be activated by pressing the OK button on the steering wheel. You don't need to press the accelerator; it can be done while stationary. Once set up successfully, the doors will automatically lock the next time you drive at speeds over 15-20 km/h. This is especially useful for frequent highway driving, as it provides extra peace of mind when the car locks itself at high speeds. If you can't find the option, it might be necessary to check if the car's infotainment system has been updated. Cars with the original factory-installed large screen generally support this feature. It's best to set it up as soon as you get the new car.
