How to set the automatic door lock when driving for the Asian Lion?

[Kathleen]

First, after getting into the car, start the vehicle, then shift the gear to the P position, and close all four windows. Then press the lock button and hold it for about 6 seconds. At this time, you will see the hazard warning lights on the dashboard flash twice, indicating that the setup is complete.

[MacCameron]

Hey, I've been driving for over 20 years, and the auto-lock feature really shouldn't be overlooked. It ensures the doors lock as soon as the car starts, preventing accidents caused by doors accidentally opening while driving. Setting it up on my Asian Lion was quite simple: First, park the car on the roadside or in a parking spot, start the engine but don't drive, then use the menu button on the steering wheel to enter the dashboard system settings. Select the vehicle security or door lock options, find the auto-lock function switch, and turn it on. Some models activate automatically when the speed reaches 10-20 km/h. If there's no response after setting, check your vehicle's version—older Asian Lion models might need to be configured via the central control screen. In case your car doesn't support factory settings, you can add an OBD interface module for modification. In short, this feature enhances driving safety—just take two minutes to set it up, don't delay!

[VonCaroline]

I'm approaching this from a technical perspective, and the auto-locking while driving setup is actually quite straightforward. You need to keep the vehicle stationary with the engine running, don't press the accelerator, navigate to the main menu using the control buttons to find the system settings section, then select door lock configuration to enable the auto-lock feature. This typically makes all doors automatically lock when accelerating to about 15 km/h. Remember that some Asian Lion models have significantly different interfaces, so you might need to check which chapter in the user manual confirms the steps; also, ensure sufficient battery voltage during operation to avoid having to repeat attempts after setup failure. For safety, after setting, test it with low-speed driving to verify proper activation.

[VonKingston]

As a father of two, the auto-lock feature is crucial for family outings, preventing kids from randomly touching door handles. In my Asian Lion, the operation is straightforward: with the car stationary and started but not moving, enter the central control menu, select safety settings, and enable auto-lock. The car will lock itself once it starts moving. This function provides peace of mind when kids are in the car, and once it becomes a habit, daily trips become much more worry-free. I recommend everyone prioritize setting this up and not overlook such small details for the sake of convenience.

[DiHope]

From an enthusiast's perspective, the auto-lock feature isn't just a factory setting—it can often be modified and expanded. My Asian Lion's factory settings were quite straightforward: access the system menu while the vehicle is stationary, select vehicle settings, and enable auto-lock. But if that's not enough, you can add an OBD port module to customize the speed threshold, which is cost-effective and works well. By the way, here's some advice shared by fellow car enthusiasts: before setting it up, make sure the door lock mechanism isn't aging to avoid malfunctions while driving, ultimately enhancing the overall driving experience.