How to set the air conditioning in Binyue?

What is the standard value of the high-pressure fuel pump for the Audi Q7?

Audi Q7 high-pressure fuel pump standard value is around 50 kPa. Starting the car at idle: Start the vehicle at idle, access the engine computer, read the measurement value block, select "589", the normal value is: around 3.8 kPa. Correct value after turning off the car: After turning off the car, the normal value is: 4.08, because the vapor lock will slowly rise. Slow decrease indicates damage: If it slowly decreases, it indicates that the fuel pump may be damaged. The high-pressure fuel pump of the car engine is prone to failure and oil leakage, which will cause changes in the car engine's data stream.

7

2

Share

What is the emission standard of the Kia K4?

The Kia K4 meets the China 5 emission standard. The Kia K4 is equipped with three types of engines: 1.8L, 2.0L, and 1.6T. Below are the relevant details: 1. The 1.8L engine has a maximum power output of 105kW (143Ps) and a maximum torque of 176N·m, paired with either a 6-speed manual or 6-speed automatic transmission, with a combined fuel consumption of 7.3L per 100km. 2. The 2.0L engine delivers a maximum power of 114kW (155Ps) and a maximum torque of 192N·m, matched with either a 6-speed manual or 6-speed automatic transmission, achieving a combined fuel consumption of 7.5L per 100km. 3. The 1.6T engine produces a maximum power of 129kW (175Ps) and a maximum torque of 265N·m, coupled with a 7-speed dual-clutch transmission, resulting in a combined fuel consumption of 6.9L per 100km.

14

1

Share

Which is more classic, the Audi C5 or C6?

Audi C6 is more classic. Differences in appearance between C5 and C6: The C5 utilizes extensive aerodynamic principles, featuring smooth and rounded exterior lines that not only look mature but also add a touch of elegance. The C6's front-end design inherits the classic family traits, presenting a serious and intelligent image, while also meeting higher pedestrian protection requirements. Differences in configuration between C5 and C6: The C5 employs a 5-valve-per-cylinder engine technology. It uses Audi's renowned Quattro all-wheel-drive system and features an adjustable suspension. The C6's engine hood is slightly raised, and the chrome trim within the evolved hexagonal single-frame grille is arranged horizontally.

11

3

Share

What is the ground clearance of the Volkswagen Polo?

The minimum ground clearance of the new Volkswagen Polo is 100mm. The new Polo's chassis is equipped with large protective panels and special aerodynamic designs. Chassis design concept: The uneven design on the chassis panels of the new Volkswagen Polo utilizes the same concept as the dimples on a golf ball, reducing air resistance and allowing air to flow more quickly. Function of the chassis: The chassis supports and mounts the car's engine and its various components and assemblies, forming the overall shape of the vehicle. It also receives the engine's power, enabling the car to move and ensuring normal operation. The power generated by the car's engine is transmitted to the drive wheels through the drivetrain.

17

2

Share

How often should the spark plugs of Wuling Hongguang S be replaced?

Wuling Hongguang S spark plugs are recommended to be replaced every 40,000 kilometers. The spark plug, commonly known as the sparking plug, functions by discharging the pulsed high-voltage electricity sent from the high-voltage wire, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the mixed gas in the cylinder. The types of spark plugs are as follows: 1. Standard spark plug: The insulator skirt is slightly recessed into the shell end face, with the side electrode outside the shell end face, and it is the most widely used type; 2. Projected insulator spark plug: The insulator skirt is longer, protruding outside the shell end face. It has the advantages of high heat absorption and good anti-fouling ability, and can be directly cooled by the intake air to lower the temperature, thus it is less likely to cause hot ignition, so it has a wide thermal adaptation range; 3. Fine electrode spark plug: Its electrode is very thin, featuring strong sparks and good ignition ability, ensuring quick and reliable engine start even in severe cold seasons, with a wide thermal range to meet various purposes; 4. Tapered seat spark plug: Its shell and threaded part are made conical, so it can maintain good sealing without a washer, thereby reducing the size of the spark plug, which is more beneficial for engine design; 5. Multi-electrode spark plug: Generally has two or more side electrodes, with the advantage of reliable ignition and no need for frequent gap adjustment, so it is often used in some gasoline engines where the electrode is prone to erosion and the spark plug gap cannot be adjusted frequently; 6. Surface gap spark plug: Also known as the surface discharge type, it is the coldest type of spark plug, with the gap between the center electrode and the shell end face being concentric.

7

4

Share

What are the three major components of GAC Aion vehicles?

The three major components of GAC Aion vehicles are the engine, transmission, and chassis. The functions of these three major components are as follows: Engine (Engine), a machine capable of converting other forms of energy into mechanical energy, used as a power generation device, also refers to the entire machine including the power unit. Chassis refers to the combination of the transmission system, running system, steering system, and braking system in a vehicle. It supports and installs the vehicle engine and its components, forms the overall shape of the vehicle, bears the engine power, and ensures normal driving. Transmission mainly refers to the vehicle's transmission, which is divided into manual and automatic types. The differences between manual transmission and automatic transmission: Manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations; automatic transmission is composed of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations.

5

2

Share

How to set the air conditioning in Binyue?

What is the standard value of the high-pressure fuel pump for the Audi Q7?

What is the emission standard of the Kia K4?

Which is more classic, the Audi C5 or C6?

What is the ground clearance of the Volkswagen Polo?

How often should the spark plugs of Wuling Hongguang S be replaced?

What are the three major components of GAC Aion vehicles?

Which Volkswagen new models have lettering on them?

What is the fuel tank capacity of the Elantra in liters?

Does the Audi 2.8 have cylinder wall mesh texture?

What car is the Peace Elite Maserati used for?