How to Set Cruise Control on Infiniti QX50?

1 Answers
Alessandra
07/30/25 7:09am
Infiniti QX50 cruise control is set as follows: Start the car, drive at a speed above 30km/h, press the SET button on the right side of the steering wheel to set the cruise control speed, and then set the desired speed. The usage of Infiniti QX50 cruise control buttons is as follows: 1. Press CANCEL to cancel cruise control, then press RES to resume cruise. 2. The SET button is used to set the cruise speed. Before activating cruise control, the speed should be set using this button. (Note: Cruise control can only be activated at speeds above 30km/h.) 3. "+" and "-" can adjust the cruise control speed, with "+" for acceleration and "-" for deceleration. 4. To enhance safety, the distance adjustment controls the distance between your car and the vehicle ahead, preventing rear-end collisions. 5. The autonomous driving system mainly includes the Lane Keeping System and Adaptive Cruise Control. The Lane Keeping System uses a camera to identify lane markings and provides alerts when deviating from the main lane, increasing driver awareness. Adaptive Cruise Control utilizes radar monitoring to detect the driving conditions of the vehicle ahead, automatically slowing down or accelerating as needed.
Was this review help?
9
0
Share
More Forum Discussions

What is the reason for the automatic flashing hazard lights of the Haval H2s?

Haval H2s automatic flashing hazard lights are caused by: brake system failure. Appearance: In terms of exterior design, the Haval H2s mainly adjusts the front bumper. The blue label version features larger fog light positions with chrome trim accents, and the hexagonal grille is changed to a five-horizontal-slat design. The red label model has a honeycomb grille, while the blue label model retains the hexagonal design. Configuration: The Haval H2s is equipped with one-button start, ESC electronic stability control system, HHC hill start assist, HDC hill descent control, RMI rollover mitigation system, TCS traction control system, rearview camera, front and rear 8 radar sensors, tire pressure monitoring, and automatic parking.
12
0
Share

What is the fuel consumption of the BYD Song Pro gasoline version?

Song Pro gasoline version's actual average fuel consumption is around 8~9 liters per 100 kilometers. The following is an introduction to BYD Song Pro: 1. BYD Song Pro Overview: The BYD Song Pro is a "globally qualified large five-seat SUV" under BYD, officially launched on July 11, 2019, and awarded the Best Debut New Car Award by the organizing committee of the 2019 Shanghai Auto Show. The BYD Song Pro is available in three different drivetrain variants: gasoline (Song Pro gasoline), plug-in hybrid (Song Pro-DM), and pure electric (Song Pro-EV). 2. Powertrain: The Song Pro gasoline version is equipped with a 1.5TI engine paired with a 6-speed automatic transmission. After new tuning, the maximum power is increased to 118kW, and the maximum torque is increased to 245N·m, meeting the China 6B emission standard. The newly optimized wet dual-clutch transmission ensures smoother power delivery, comparable to a 6AT, with gear shifts that are almost imperceptible. 3. Safety Features: The Song Pro is equipped with L2-Plus intelligent driving assistance technology, capable of achieving about 20 driving assistance functions, including adaptive cruise control, lane departure warning, lane keeping, blind-spot monitoring, etc. Among them, the holographic transparent imaging system, unique in its class, provides a 360-degree view around the vehicle and even under the car, eliminating blind spots. For user convenience, it features a smart electric tailgate, seat heating and ventilation, and a PM2.5 Green Air Quality Intelligent Optimization System.
19
3
Share

What is the normal pressure for an automotive Freon gauge?

For automotive air conditioning refrigerant pressure gauges, simply observe whether the kilogram reading is excessive. The outer red ring ranging from -30 to 350 LB/IN2 represents imperial pressure units, while the inner scale from -0.1 to 2.5 MPa indicates metric pressure units. When not pressurized, the gauge needle should rest at the 0 position. During normal air conditioning operation, the needle should point to approximately 0.5 MPa. 0.1 MPa is roughly equivalent to 1.0197 kg/cm² = 0.987 atm. The standard operating pressure for air conditioning systems is 5.0985 kg/cm². Below are additional relevant details: Precautions for automotive air conditioning refrigerant charging: 1. Before vacuuming, completely replace any non-compatible refrigerant types to ensure proper performance. 2. When replacing components like compressors, high/low pressure pipes, or receiver-driers, always seal pipe openings. 3. Conduct leak tests before refrigerant charging, replace sealing rings whenever possible, check compressor oil levels, and replenish if necessary. 4. Adhere to specified refrigerant quantities within the designated +/- tolerance range - neither excessive nor insufficient. 5. Be mindful of refrigerant type differences, particularly between R12 (Freon) and R134A (environmentally friendly refrigerant).
8
0
Share

Why was the Yadi X5 discontinued?

Yadi X5 was discontinued because its production output had reached saturation, and Yadi Company needed to produce new models of electric vehicles. Below is relevant information about the Yadi X5: 1. Basic parameters: electric motorcycle, lithium battery. (Product dimensions: 1800×740×1110-1335m) 2. Main parameters: front and rear disc brakes, RS smart induction key, scratch-resistant elegant black/matte pearl yellow-green, scratch-resistant elegant black/matte Zhuhai blue, scratch-resistant elegant black/matte gold-red, matte pearl white/scratch-resistant matte black, inverted hydraulic front suspension, hydraulic airbag rear suspension, vacuum tires, cool M-shaped headlights, mysterious warrior taillights.
3
2
Share

What does PEPS mean in cars?

PEPS in cars refers to the Passive Entry Passive Start system. Here are the relevant introductions: 1. The function of the PEPS system is simply that when the driver steps into a specified range, the system can recognize the authorized driver and automatically unlock the door; when leaving the vehicle, the door locks will automatically lock and enter an anti-theft state. At the same time, the PEPS system can also remember all service and diagnostic information, such as seat adjustments, air conditioning settings, entertainment information, etc. 2. Simplifying car operations: The PEPS system can be said to be a combination of intelligence and convenience. It eliminates many complicated steps and simplifies car operations. The PEPS system mainly operates through four components: door handle switches, low-frequency antennas, car keys, and high-frequency receivers.
19
5
Share

Can I Change Driving Schools Midway Through the Driving Test Process?

If the three-year validity period for obtaining a driver's license expires before completing all required tests, any previously passed subjects become invalid, and you will need to retake the exams. Of course, if you decide not to continue and want a refund, the amount refundable depends on the progress of your tests, categorized as follows: Enrolled in a driving school but haven't taken any tests: In this scenario, there is technically no "three-year expiration" because the three-year validity period only begins after passing the Subject 1 exam, when the vehicle management office issues the Learning to Drive Certificate. Therefore, if you haven't attended Subject 1 training or, after completing Subject 1, the driving school fails to arrange Subject 2 training within 60 days due to the school's reasons, the driving school should provide a full refund. Passed Subject 1 but remaining subjects expired: If you've passed some subjects but failed to complete the remaining ones within the three-year validity period, the driving school may refund a portion of the training fees. However, if the delay is entirely due to the student's personal reasons exceeding the three-year limit, the driving school is not obligated to refund. Fast-track exam scheduling for expiring licenses: If the Learning to Drive Certificate has less than six months of validity remaining, students can switch to priority scheduling when booking exams. Note that each subject can be prioritized for scheduling once online. During priority scheduling, students can choose from available exam slots with remaining priority spots. As long as the scheduling request is successful and there are no other regulatory obstacles preventing the exam, the test can be arranged.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.