How to Set Auto-Lock on Cerato?

1 Answers
DiJaxon
07/30/25 7:06am
To set the auto-lock feature on the Cerato, follow these steps: 1. First, shift the gear to the P position; 2. Turn the key to the ON position and close all four doors; 3. Press and hold the lock button for 6 seconds until the hazard warning lights on the dashboard flash twice, indicating completion. The Cerato is a compact car under Dongfeng Yueda Kia, equipped with two engine options: a 1.6L naturally aspirated engine with a maximum power of 112 horsepower and 145 Nm of torque, and a 1.8L naturally aspirated engine.
Was this review help?
8
0
Share
More Forum Discussions

What Causes the Maintenance Light to Illuminate in the Ford Explorer?

Ford Explorer maintenance light illuminates to remind the owner that maintenance is required. Below are the specific details about the Ford Explorer: 1. Vehicle Positioning: The Ford Explorer is a mid-to-large-sized SUV. 2. Interior Features: The 12.8-inch vertical central control screen is equipped with the SYNC+2.0 Intelligent Information Entertainment System, which supports GPS navigation, voice recognition control, multimedia entertainment, and more. Additionally, the L2-level Ford Co-Pilot360 Intelligent Driving Assistance System is standard across all models. 3. Powertrain: The entire lineup features a high-spec 2.3T+10AT powertrain combination, with the engine delivering a maximum power of 276 horsepower and a maximum torque of 425 Nm. The rear-wheel-drive model accelerates from 0 to 100 km/h in just 7.6 seconds. Except for the entry-level model, all other models come with a four-wheel-drive system, and the fuel consumption is around 12L per 100 kilometers.
12
5
Share

How to reset the maintenance light on the 2020 Geely Emgrand GS?

Ignition switch: With the ignition switch turned off, press and hold the trip reset button without releasing, insert the car key and turn it to the position where the instrument lights come on, then release the trip reset button and wait for the maintenance light to go off. Instrument panel: There is a button on the instrument panel used to adjust the trip odometer. Press and hold this button for 2-3 seconds while the engine is idling; once the maintenance reminder turns off, the maintenance reset is complete. Mode button: Turn off the ignition switch; simultaneously press and hold both arrow buttons, then turn on the ignition switch; after the ignition switch has been on for about 3 seconds, release both arrow buttons; the display will then show the maintenance menu, asking if you want to reset; press and hold the SET (reset) button for more than 3 seconds; press the MODE button; turn off the ignition switch to complete the reset.
20
1
Share

What Kind of Driver's License is Required to Drive a Jinbei Vehicle?

Jinbei belongs to the category of small and mini passenger vehicles. According to the regulations on permissible driving vehicle types in the "Rules for the Application and Use of Motor Vehicle Driving Licenses," a C1 driver's license is sufficient to drive a Jinbei. Below are the specific details: 1. Permissible Driving: According to the "Regulations for the Application and Use of Motor Vehicle Driving Licenses," the permissible driving scope of a C1 license includes small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Based on this standard, a C1 license does not permit driving vehicles with more than 9 seats. 2. Non-Permissible Driving: Large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
14
0
Share

Is D Gear the Forward Gear?

Yes, it is the forward gear. D stands for the first letter of the English word Drive (meaning: to drive), hence D represents the forward gear. Additional information: 1. R Gear: R is the first letter of the English word Reverse (meaning: to go backward or opposite), so R represents the reverse gear. 2. Gear Lever: The gear lever, also known as the shift lever, is used in the vehicle's transmission system and its main function is to facilitate gear shifting. The gear lever is a rod-like component, commonly categorized into 1-2 gear levers, 3-4 gear levers, and five-speed gear levers. The five-speed gear lever usually integrates the reverse gear function. The gear lever is equipped with shift forks and shift shaft forks to achieve its functional combination.
17
5
Share

What is the Nickel Demand for New Energy?

With the increase in nickel metal content in new energy applications, the battery range will improve under the same conditions. Below is relevant information about new energy: 1. Concept: It refers to various forms of energy beyond traditional energy sources. These are energy sources that are just beginning to be developed and utilized or are under active research and awaiting promotion, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. 2. Characteristics: These energy sources are abundant and generally possess renewable characteristics, allowing for sustainable use by humanity. Currently, except for hydropower, the development and utilization costs of renewable energy are higher than those of fossil fuels.
20
4
Share

Is it necessary to go to a 4S shop to replace spark plugs?

It is not necessary to go to a 4S shop to replace spark plugs. Replacing spark plugs is not a difficult task. If you have some hands-on ability, you can completely replace them by yourself, and you can also save on labor costs. The process of replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, pay attention to whether there are leaves, dust, etc., on the outside, and be sure to clean them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Install the removed high-voltage distributor wires according to the ignition sequence, and then snap the cover back into place. Spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.