How to Safely Pass Oncoming Vehicles on Curves Without Centerlines?

1 Answers
GageDella
07/25/25 12:58am
Actively reduce speed and drive on the right side. Maintain a larger safe distance from oncoming vehicles and avoid driving near the center of the road. Drive at reduced speed to prevent scraping or collision accidents.
Was this review help?
20
4
Share
More Forum Discussions

What Causes Water Dripping from the Car Exhaust Pipe?

Water dripping from the car exhaust pipe is a normal phenomenon, commonly observed in new cars. This occurs in all types of vehicles and indicates that the fuel inside the engine is burning efficiently. During operation, the engine burns gasoline, producing water vapor and carbon dioxide. When the external temperature is low, the water vapor condenses into droplets as it passes through the exhaust pipe. If the car's exhaust appears as a milky white oil mist that solidifies upon hitting the ground, it is likely due to poor fuel vaporization. This condition usually disappears after the engine has been running for some time.
7
5
Share

Is Variable Steering Ratio Useful?

Variable steering ratio is very useful. The variable steering ratio function means that at low speeds, you only need to turn the steering wheel once to lock it, while at higher speeds, it behaves like normal, requiring 1.5 turns to lock the steering wheel. Its main benefit is that when driving in 1st gear or reverse, you need to turn the steering wheel less to achieve better results, making it more effortless and improving maneuverability. Below are the names different manufacturers use for this feature: 1. BMW: AFS Active Front Steering 2. Mercedes-Benz: Direct Steering System 3. Audi: Dynamic Steering System.
10
3
Share

How to Judge the Distance Between Vehicles While Driving

Here are methods to judge the distance between vehicles: 1. When the rear wheel's lower edge of the front vehicle aligns with the lower edge of your windshield, the distance is approximately 3-5 meters. 2. When the lower edge of the front vehicle's bumper aligns with the lower edge of your windshield, the distance is about 2 meters. 3. When the upper edge of the front vehicle's bumper aligns with the lower edge of your windshield, the distance is 0.5-1 meters. 4. When the rear vehicle's image occupies the entire rearview mirror, the distance is about 3 meters; when it occupies two-thirds of the mirror, about 5 meters; when it occupies half of the mirror, about 9 meters; and when it occupies one-third of the mirror, about 12 meters.
2
1
Share

Is it okay to drive in sandals?

There are no explicit regulations prohibiting driving in sandals, but sandals come in various types, among which high-heeled sandals should not be worn while driving. According to relevant laws, motor vehicle drivers are not allowed to drive barefoot, in slippers, or in high heels. Violators may face fines. Below are the hazards of driving in slippers: 1. First, slippers do not fit snugly and are prone to slipping off, making it easy to slip when braking in an emergency; 2. Secondly, driving in slippers can lead to inaccurate control of the clutch and accelerator, posing significant safety risks. Experimental studies indicate that slippers can delay braking response by 0.13 seconds, equivalent to extending the braking distance by 3.5 meters when driving at 60 kilometers per hour.
4
2
Share

How to Replace the Key Battery of Beijing Hyundai ix35?

Beijing Hyundai ix35 key battery replacement method: Press the button to remove the physical key, insert the physical key into the groove, gently apply force to the left and right to remove the old battery, align the positive and negative poles of the battery, and replace it with a new one. The Beijing Hyundai ix35 is a compact SUV under Hyundai, with a length, width, and height of 4420 mm, 1820 mm, and 1690 mm respectively, and a wheelbase of 2640 mm. In terms of power, this car uses two engines, one is a 1.4-liter turbocharged engine, and the other is a 2.0-liter naturally aspirated engine. The front suspension of the Hyundai ix35 uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
13
1
Share

How to Use Cruise Control in the 10th Generation Accord Elite Edition?

To activate cruise control in the 10th Generation Accord, follow these steps: 1. Press the CRUISE button located at the top right of the steering wheel. This will put the cruise control system into standby mode. 2. Accelerate the vehicle to your desired speed. 3. To cancel cruise control during operation, either press the brake pedal or press the CANCEL button. 4. During cruise control, pressing or holding the RES button will increase speed. Alternatively, you can accelerate to your desired speed by pressing the accelerator pedal and then pressing RES to set the new speed. 5. Pressing or holding the SET button during cruise control will decrease speed.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.