···
Log in / Register

What Causes the Zizzing Sound When Starting the Car Engine?

6Answers
VonAdaline
07/25/2025

The reasons for the zizzing sound when starting the car engine: 1. Check the tightness of the belt. If the car belt is loose, it will produce a zizzing sound, and you should take it to a repair shop for inspection; 2. If the car has not been used for a while, the engine oil will return to the oil pan, and the valve chamber will lack oil. Without the sealing and lubrication of the oil, you will hear a zizzing sound when starting the car. The engine is a machine that converts other forms of energy into mechanical energy. It was invented in the UK and can refer to both the power generation device and the entire machine including the power device. Types of engines include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines and steam engines), and electric motors.

Was this review help?
2
4
Share
VanViolet
08/11/2025

A buzzing sound when starting the car engine can be caused by several factors, such as belt slippage or looseness. The most common is the alternator belt rubbing back and forth, producing that squeaking noise; if the belt is aged or cracked, it can be particularly noticeable under the high load of startup. Alternatively, the starter may have issues, such as worn internal gears or brush problems, causing uneven current flow. I once experienced this sound and later found the belt wasn’t tensioned properly—adjusting it fixed the issue. Low battery voltage can also strain the starter, creating similar noises. In short, don’t ignore it; get it checked early to avoid worsening into starter damage or breakdown. It’s best to have a trusted technician inspect the electrical system.

Was this review help?
11
0
Share
Expand All
StLeonardo
09/26/2025

The annoying squealing sound during startup might come from belt friction or starter motor issues. If it's the belt, a loose alternator or AC belt can slip and cause squeaking; or a partially stuck and worn starter can produce similar noises. Low battery voltage may also make the motor struggle and whine. With decades of driving experience, I've heard this sound multiple times—ignoring minor issues led to broken belts and costly part replacements. I recommend manually inspecting the belt first—replace it if cracked. Don't overlook safety concerns; address them promptly to avoid stalling hazards on the road.

Was this review help?
6
4
Share
Expand All
Gia
11/10/2025

A buzzing sound during startup usually comes from belt or starter issues. For example, belt slippage causes friction noise, while worn starter gears produce squeaking. If the battery is weak, the motor may also buzz when struggling. I've fixed this problem before - simply tightening the belt worked. Don't ignore minor issues; early inspection can prevent major repairs.

Was this review help?
4
3
Share
Expand All
SanBryce
12/31/2025

The engine making a sizzling noise upon startup is likely due to abnormal belt system conditions, such as a loose or aged alternator belt slipping; worn internal components of the starter like carbon brushes or gears can also produce similar sounds. I once ignored it, and later the starter seized up, costing much more to repair. It's advisable to identify the sound source: front-end noises often indicate belt issues, while rear sounds near the starter warrant checking electrical connections. Additionally, inspect the battery's lifespan as low voltage exacerbates the problem. Acting promptly reduces risks, preventing startup failures from causing trouble.

Was this review help?
16
2
Share
Expand All
Lukas
03/28/2026

A common cause of a squealing sound during startup is belt slippage or a starter motor malfunction. A loose alternator belt can cause a squeaky friction noise; issues with the starter gear or electrical circuit can also produce similar sounds. My car had this problem before, and by listening, I pinpointed it to the belt—replacing it fixed the issue. Sometimes, an old battery can cause the motor to work harder, leading to a squealing noise. It's recommended to first check the belt tension yourself—if it's too loose, adjust it tighter. If the noise persists, take it to a professional shop to inspect the electrical system. Small issues not fixed promptly can lead to more expensive component damage.

Was this review help?
8
4
Share
Expand All
More Q&A

What to do if the GL8 anti-theft lock prevents the engine from starting?

If the anti-theft system is locked and the engine won't start, it is likely that the vehicle is equipped with an engine electronic anti-theft system, also known as a chip-type anti-theft system. Its basic principle is to lock the car's engine, circuits, and fuel system, making it impossible to start the vehicle without the chip key. The anti-theft lock being stuck is a common issue with car anti-theft systems. The methods to deactivate the car anti-theft system are as follows: 1. Turn off the alarm: When the door lock is disabled, an alarm will sound. If this happens to your car, use the key to open the driver or passenger door, then wait for a few minutes, and the alarm will stop. Open the engine hood, locate the alarm, and turn it off. 2. Check the fuse: Generally, the fuse box is located under the steering wheel. Find the fuse box and remove the fuse belonging to the alarm. Before any of the above methods take effect, you can disconnect the battery. Alternatively, take the car to a repair shop and have a mechanic handle it, then reinsert the fuse without damaging the wiring.
11
3
Share

What to Do If Your Car Has a Flat Tire on the Road?

First, be sure to turn on the hazard lights and place a warning triangle behind the car (250 meters at night on highways, 150 meters during the day on highways, 50 meters during the day on regular roads, and 150 meters at night) to alert oncoming vehicles to take caution and avoid the area. At the same time, all passengers should exit the vehicle and move to a safe location to prevent secondary accidents. Then, call the highway rescue hotline at 12122, or you can replace the spare tire yourself and drive to the nearest repair shop. To prevent flat tires, the following measures should be taken: 1. Check tire pressure: Before setting off, carefully inspect the tire pressure for any abnormalities, check for damage on the tread, bulges on the sidewalls, and the extent of tire wear, among other tire-related conditions. 2. Avoid speeding and overloading: While driving, strictly avoid speeding and overloading to prevent tire blowouts caused by excessive tire load. 3. Prevent fatigue driving: For long-distance trips, avoid driving for extended periods without breaks. Take a short rest every 2-4 hours by pulling into a service area to prevent fatigue driving and overheating of the tires, which can lead to blowouts.
19
5
Share

What is the rubber hose on the engine called?

The rubber hose on a car engine is called the crankcase forced ventilation tube. The purpose of crankcase forced ventilation is to maintain pressure balance within the engine's crankcase, preventing damage to sealing components due to excessive or insufficient pressure. When the engine is idling or operating at low speed with light load, the crankcase experiences significant negative pressure. This condition can cause a large amount of engine oil to enter the intake system along with blow-by gases and participate in combustion, leading to oil burning and severely affecting engine performance and emissions. Therefore, forced ventilation of the crankcase is necessary. When pressure inside the crankcase increases, ventilation occurs through the exhaust valve or oil-gas separator, keeping crankcase pressure fluctuations within a reasonable range. Effects of crankcase forced ventilation tube leakage: It removes the minimal exhaust gases and mixture that leak into the crankcase to prevent oil deterioration; reduces crankcase temperature and decreases piston downward resistance; If the ventilation system becomes clogged, it will increase oil consumption and shorten the oil change interval; Increased oil temperature reduces lubrication performance, increases leakage, and decreases engine power and fuel economy; Increases piston movement resistance, leading to higher fuel consumption.
7
1
Share

What is the load capacity of a small SUV?

Generally, the load capacity of a family sedan ranges from 375 to 500 kg. Features of SUVs: SUVs are characterized by strong power, off-road capability, spacious comfort, and excellent cargo and passenger-carrying functions. Some also say that an SUV combines the refined comfort of a luxury sedan with the rugged nature of an off-road vehicle. SUVs are a hybrid offspring of sedans and off-road vehicles, offering greater advantages compared to their ancestors. SUV Models: World-class SUVs are represented by models such as the American Jeep Grand Cherokee, the British Land Rover Range Rover, and the German Mercedes-Benz G-Class, which have become symbols of the affluent class. In the luxury SUV segment, well-known models include the Cadillac XT5 and SRX, Audi Q series, BMW X series, Mercedes-Benz G, GLK, and ML series, Lexus GX, LX, and RX series, Porsche Cayenne, Volkswagen Touareg, Infiniti QX series, Acura MDX, ZDX, and RDX, Land Rover Range Rover and Freelander, among others. Domestic SUVs are renowned for their high cost-performance ratio, with models like the Song Pro, Roewe RX5, Haval H6, and Changan CS75 standing out as representatives of independent SUVs.
13
4
Share

Does the vehicle license have an expiration period?

The vehicle license is valid for a long term, but it still requires annual inspection. The inspection expiration date is marked on the supplementary page, which essentially indicates the deadline for the annual inspection. Therefore, the validity period of the vehicle license is also tied to the annual inspection. Different types of vehicles have different validity periods. Below is more relevant information: 1. Annual Inspection: Vehicles exempt from inspection for 6 years do not require on-site testing within the first 6 years, and annual inspection starts from the sixth year, with the vehicle license valid for 5 years; for vehicles older than 6 years, an annual inspection is required, and the vehicle license is valid for 1 year; for vehicles older than 15 years, two inspections per year are required, and the vehicle license is valid for half a year. 2. Vehicle License Cannot Expire: The vehicle license must not expire, as expiration indicates the vehicle has not undergone annual inspection, and uninspected vehicles are not allowed on the road. If driving an uninspected vehicle, once caught, the driver will face a penalty of 3 demerit points and a fine of 200 yuan. Therefore, the annual inspection must be completed before the inspection expiration date marked on the vehicle license. If the vehicle license has expired, the owner should bring relevant documents to the traffic police department within 30 days for processing and apply for re-inspection procedures.
14
4
Share

What causes the leakage of air conditioning water in the front passenger side of a Xiali N5?

The reasons for the leakage of air conditioning water in the front passenger side of a Xiali N5 are as follows: Quality issues with the drainage pipe: Some drainage pipes are of poor quality, prone to aging and loosening, causing the pipe to bend and resulting in poor drainage. Improper installation of the air conditioner: If the air conditioner is not installed securely, it may shift over time, causing the position of the drainage pipe to change and leading to drainage difficulties. Condensation on the pipes. If the insulation material on the pipes is of poor quality or too thin, condensation is likely to occur when the refrigerant passes through. Issues with the heat exchanger: Dirty or damaged filters that are not cleaned or replaced in time can cause the evaporator to deform, preventing water from dripping into the tray properly. Insufficient Freon in the air conditioning system can cause the indoor unit's evaporator to freeze, preventing water droplets from dripping into the water collection tray. Poor material quality or improper internal design of the air conditioner can prevent water from flowing into the tray, causing it to drip down the plastic casing instead.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.