How to reset the tire pressure warning on Lynk & Co 06?

[McJulia]

Inflate the tires according to the recommended pressure value indicated on the B-pillar of the driver's seat. Click on the settings in the central control screen, select the vehicle tab on the left, and then click on the basic vehicle settings. Swipe up the interface to display the bottom content and click on the tire pressure calibration option. In the pop-up dialog box, click confirm. The warning will be reset and eliminated after driving the vehicle for a few minutes.

[LaJustin]

Last time when I was driving the Lynk & Co 06, the tire pressure warning light suddenly came on, which made me nervous thinking something serious had happened. I quickly found a safe spot to pull over and checked the manual. It stated the recommended pressure is about 2.4 bar for the front tires and 2.2 bar for the rear tires. Using the onboard pressure gauge, I found the left front tire was only at 2.1 bar. I immediately went to a gas station to inflate it to the standard value. After returning to the car and starting the engine, I used the left button on the steering wheel to navigate to the menu options, selected vehicle settings, and clicked the tire pressure monitoring system reset button to confirm execution. The light turned off instantly. Since then, I’ve made it a habit to check the tire pressure every month to avoid similar situations. After all, maintaining proper pressure saves fuel and ensures safety. This car is quite considerate with its automatic alerts, but you have to manually reset it to clear the warning.

[BrantleyLynn]

As someone who frequently tinkers with cars, I understand the tire pressure alarm reset principle of the Lynk & Co 06: the system relies on sensors to monitor pressure deviations in real time and trigger alerts. The reset steps aren't complicated. First, ensure all four tires are inflated to the normal value (approximately 2.3-2.5 bar - check the vehicle's label sticker). Then, start the engine but don't drive immediately. Navigate to the settings menu via the steering wheel controls, locate the tire pressure reset option, and tap it once. If the reset fails, drive a few kilometers and try again - sometimes the sensors need time to calibrate. Don't forget regular pressure checks to reduce false alarms, especially during cold weather when pressure tends to drop. This is an important aspect of routine vehicle maintenance.

[StHailey]

Here's a simple method for you: First, park the car safely and check if the tires have any obvious leaks or punctures. If no issues are found, use a pressure gauge to measure the tire pressure. If it doesn't meet the standard, inflate to the recommended value (approximately 2.4 bar). Start the engine, access the vehicle information through the center console screen or steering wheel buttons, select the tire pressure reset option, and confirm the operation. The warning light will disappear shortly. Pay attention while driving and don't ignore warnings, as incorrect pressure increases fuel consumption and handling risks. After resetting, maintain a monitoring habit. The whole process takes just two minutes to complete.

[McDeclan]

Never ignore the tire pressure warning. Low pressure increases the risk of blowouts and damages the suspension. On my Lynk & Co 06, every time the warning light comes on, I first slow down and stop to check. After confirming there's no damage, I inflate the tires to the standard value—around 2.4 bar as indicated in the manual. Then, I start the car and use the settings menu to perform a tire pressure reset, which immediately clears the warning. Safety always comes first—avoid high-speed driving before resetting. Regular tire maintenance can prevent this issue, saving money and ensuring peace of mind. Correctly resetting the system is a crucial step.

[Jasper]

Many friends ask how to clear the tire pressure warning. A common mistake is to reset it directly without refilling. The correct steps are to ensure the tire pressure meets the standard before operating. The recommended value for the Lynk & Co 06 is marked on the inside of the door. First, use a reliable pressure gauge to measure. If the pressure is insufficient, inflate the tires, then get in the car with the engine running, navigate to the steering wheel menu, select the tire pressure monitoring reset, and confirm execution. Environmental factors such as temperature changes may affect the success of the reset. If the light does not go off, drive a short distance or check for sensor faults. Regularly checking the tire pressure can help avoid such troubles.