···
Log in / Register

What engine does the Ferrari FF use?

1Answers
TeaganFitz
07/29/2025, 05:39:15 PM

Ferrari FF uses a 6.3L V12 naturally aspirated engine with a maximum horsepower of 660PS, maximum power of 485kW, maximum torque of 683Nm, and maximum torque speed of 6000rpm. It is paired with a 7-speed dual-clutch transmission. Taking the 2012 Ferrari FF as an example, it is a hardtop sports car with the following dimensions: length 4907mm, width 1953mm, height 1379mm, wheelbase 2990mm, fuel tank capacity 91L, luggage capacity 450L, and curb weight 1790kg.

Was this review help?
105
Share
More Q&A

What are the correct steps to turn off a car?

Shift to N gear, engage the handbrake, shift to P gear, release the brake pedal, ensure the car is in P gear, then turn the key counterclockwise or press the one-button start switch, and adjust the ignition switch to the OFF position. Press the clutch and brake pedals, engage the handbrake, shift to neutral, release the clutch and brake pedals, then turn the key counterclockwise or press the one-button start switch, and adjust the ignition switch to the OFF position.
105
Share

How to Deal with Rotten Smell in the Car?

While driving, try to use the external air circulation system and frequently open the windows. If your car has a sunroof, you can also open it to enhance ventilation. Volatile gases such as formaldehyde and benzene are released more quickly when the temperature exceeds 30°C. In summer, it is best to open the windows directly to dissipate odors. However, excessive exposure to sunlight can still have some negative effects on the vehicle. Many things can help absorb odors, such as essential oil diffusers, fruit peels, lemon slices, onions, activated charcoal, etc., all of which are good options.
111
Share

How to Route the Outer Belt on a Buick Excelle?

Turn off the engine and allow it to cool down, then open the engine hood to locate the engine. Loosen the generator's main pulley shaft and release the adjustment bolt on the generator. Adjust the pivot bolt. Pull the auxiliary pulley on the generator outward and move the generator inward to release the belt. Align the generator's main pulley shaft to the correct position, place the generator's belt onto the main pulley shaft, and pull the generator outward. Route the generator's belt onto the two auxiliary pulleys. Adjust the pivot bolt. Install the generator's timing cover, and the generator belt will then be properly installed.
110
Share

How to Determine if a Vehicle is Crossing the Lane Line?

Using the wiper as a reference point, when the wiper coincides with a certain point on the ground, the vehicle is crossing the lane line. Depending on the reference point chosen, you may need to test and adjust accordingly. First, extend your arm straight to the far left of the steering wheel, pointing in the direction of travel. If your arm aligns with the road marking, then the left wheel has crossed the lane line. For vehicles with the driver's seat on the left side, when the center of the engine hood aligns with the right lane divider, it indicates that the right wheel has crossed the lane line. When the white lane line coincides with the center of the hood, the vehicle is crossing the lane line.
102
Share

How to adjust the hood buffer rubber pad?

Open the hood, there is a black rubber pad on each side of the radiator frame behind the grille, which is used to support the hood. Rotate the black rubber pad left or right by hand to adjust the gap between the hood and the grille.
116
Share

What is the method of using toothpaste to prevent rain on rearview mirrors?

Evenly apply toothpaste or soap on the side window glass of the car, wait for a while until the applied soap hardens, then wipe it clean with a towel to solve the problem. Spray glass water repellent evenly on the car windows and rearview mirrors, and a protective film will form on the surface of the rearview mirror. This protective film also has hydrophobic properties. If the glass on both sides of the car fogs up, turn on the car's air conditioning defogging function and adjust the air outlet angle towards the glass. For the problem of fog and water droplets on the rearview mirror, if there is a rearview mirror heating function, turn it on and it will effectively remove the fog within 3-5 minutes.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.