How to reset the tire pressure warning on a BMW 3 Series?

How to Reactivate an ETC Device That Fell Off Accidentally?

ETC device accidentally fell off reactivation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on". If "Tag invalid" appears when inserting and removing twice without the electronic tag attached, this is a normal phenomenon and does not affect reactivation. Alternatively, you can directly press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation. ETC installation positions: For small vehicles like cars and minivans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part.

1

4

Share

How to Reset the Maintenance Light on Shanghai Volkswagen Santana?

Shanghai Volkswagen Santana maintenance light reset steps are as follows: 1. Turn off the car's ignition switch and shut down the engine, then press and hold the reset button on the dashboard to eliminate the maintenance light: Hold the right reset button on the dashboard with your left hand, turn on the ignition switch while continuing to hold the right button with your left hand, wait until the maintenance light enters the reset mode, release the right button, and within 20 seconds of releasing the right button, press the left 'menu button' once to confirm the reset. 2. The function of the car maintenance light is to remind the owner to take the car for maintenance as soon as possible: When the car maintenance light comes on, the owner should go to the 4S shop for maintenance as soon as possible. After the maintenance, the 4S shop will use a fault diagnostic tool to reset the maintenance light for the vehicle. If the car has undergone normal maintenance and the engine oil has been replaced, there is no need to worry even if the maintenance light comes on, just reset it again.

16

1

Share

Is Dayang Motorcycle a Joint Venture or Domestic Brand?

Dayang motorcycle is a domestic brand, belonging to the first-tier domestic brands. It is a joint venture but not a joint venture brand. It is a joint venture with Thailand's Charoen Pokphand Group, introducing Honda's technology and production lines for manufacturing. Motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc. Daily maintenance methods for motorcycles: 1. During the break-in period, control the motorcycle's idle speed at 100 rpm; 2. Match the motorcycle's gear with the corresponding speed; 3. When you need to brake upon encountering a situation ahead, release the throttle, step on the rear brake with your right foot, and gently apply the front brake with your right hand simultaneously; 4. Regularly check the spark plugs; 5. When installing a new spark plug, hand-tighten it until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn; 6. Regularly lubricate the chain.

7

1

Share

Does Door Panel Repair Require Door Removal?

If there is body denting with paint damage, panel repair and repainting are recommended without door removal. However, if there is no paint damage and you are particularly concerned about preserving the original paint, you may consider paintless dent repair (PDR) technology, which allows for body dent repair without damaging the original paint. Below is additional information: Definition of Auto Body Panel Repair: Auto body panel repair is a method of vehicle maintenance, also known as cold working. It is required when the vehicle's exterior is damaged or deformed. Automotive Collision Repair: Automotive collision repair has evolved from primitive "hammering, pulling, welding, and patching" to a secondary manufacturing and assembly process for the vehicle body. Repairing collision-damaged vehicles is no longer just about hammering and shaping the panels, nor can repair quality be judged solely by visually inspecting the vehicle's appearance and gaps. Repair technicians must not only understand the vehicle's technical parameters and dimensions but also master the characteristics of body materials, stress distribution, deformation trends, stress points, and manufacturing processes such as welding techniques.

2

0

Share

Can Glass Cracks Be Repaired?

This situation depends on how severe the glass crack is. Some cracks can be repaired, but the prerequisite is that only the outermost layer of the glass has cracks. Generally, repairable crack types include star-shaped cracks and linear cracks. If the crack is too large, it is recommended to replace the glass. Here is more information: Glass Repair: After the glass is damaged by being hit by a hard object, the method of repairing the glass by filling resin into the dents and cracks is similar to the current form of resin dental fillings. Glass repair has the advantages of short operation time and lower cost, but its limitation is also very obvious—it can only repair small cracks or wounds on the front windshield. Notes: If cracks appear on the windshield, they should be repaired as soon as possible. Otherwise, with temperature changes, heating and cooling can cause the glass to deform, and continued driving will further erode the damaged area due to wind resistance, continuously applying pressure. The damaged area may expand, and if the optimal repair area is missed, the repair effect may be greatly reduced.

11

0

Share

Where is the Honda Vezel's cabin air filter located?

Honda Vezel's cabin air filter is located behind the glove box on the passenger side. To replace it, you need to partially remove the glove box or take it out completely for easier access. Below are the steps to replace the Honda Vezel's cabin air filter: 1. There is a clip on the left side panel of the glove box; first, pull the clip upward to remove it. 2. Push the side panels of the glove box inward to release the clips above, allowing you to partially remove the glove box and reveal the cabin air filter cover. 3. Push the clips on both sides of the cabin air filter cover inward to remove it, then take out the old filter and replace it. 4. When installing the new cabin air filter, pay attention to the arrow direction—compare it with the original filter; the arrow should point downward. Reassemble everything in reverse order.

8

1

Share

How to reset the tire pressure warning on a BMW 3 Series?

How to Reactivate an ETC Device That Fell Off Accidentally?

How to Reset the Maintenance Light on Shanghai Volkswagen Santana?

Is Dayang Motorcycle a Joint Venture or Domestic Brand?

Does Door Panel Repair Require Door Removal?

Can Glass Cracks Be Repaired?

Where is the Honda Vezel's cabin air filter located?

What time does the Subject 2 test start?

How soon can I reschedule after canceling an appointment?

Is the Subject 4 Exam Difficult?

Can traffic restriction cameras capture motorcycles?