···
Log in / Register

Where is the Honda Vezel's cabin air filter located?

6Answers
DeRobert
07/29/2025, 10:29:53 PM

Honda Vezel's cabin air filter is located behind the glove box on the passenger side. To replace it, you need to partially remove the glove box or take it out completely for easier access. Below are the steps to replace the Honda Vezel's cabin air filter: 1. There is a clip on the left side panel of the glove box; first, pull the clip upward to remove it. 2. Push the side panels of the glove box inward to release the clips above, allowing you to partially remove the glove box and reveal the cabin air filter cover. 3. Push the clips on both sides of the cabin air filter cover inward to remove it, then take out the old filter and replace it. 4. When installing the new cabin air filter, pay attention to the arrow direction—compare it with the original filter; the arrow should point downward. Reassemble everything in reverse order.

Was this review help?
108
Share
LylaFitz
08/15/2025, 04:39:30 AM

I've been driving a Honda Vezel for several years and have replaced the air conditioning filter several times myself. It's located behind the glove compartment on the passenger side, quite easy to find. You need to open the glove compartment first, and there are small clips or screws on both sides. Gently press or unscrew them to remove the entire glove compartment. The black box behind it is where the filter is located. Just open the cover, take out the old filter, and replace it with a new one. Regularly changing the filter is very important. I usually replace it once a year, especially in dusty cities. If not replaced, it can cause odors and affect health. Doing it yourself saves money and is simple—just buy a filter for a few dozen bucks, and you can also check the air conditioning system while you're at it. It's advisable to check the manual or online tutorials beforehand to avoid messing up the clips the first time. The design is reasonable and user-friendly, so even beginners shouldn't worry.

Was this review help?
1
Share
Expand All
Orlando
10/21/2025, 02:33:54 AM

As a DIY enthusiast car owner, I'm very familiar with the location of the Honda Vezel's cabin air filter - it's behind the glove box. When replacing it, first open the glove box, press in the clips on both sides or unscrew them with a screwdriver, then easily remove the glove box to reveal the filter housing. Take out the old filter and install the new one, making sure the arrow points toward the rear of the vehicle. This simple job saves money and is quick to do yourself - buying compatible filters online is much cheaper. I replace mine every 15,000 km to maintain smooth airflow and prevent dust buildup from affecting cooling efficiency. Just prepare a screwdriver and gloves, and be careful not to use excessive force to avoid damaging the clips. Proper maintenance extends the AC system's lifespan, especially making summer cooling more comfortable. It's a low-risk task with great DIY satisfaction.

Was this review help?
4
Share
Expand All
VanJocelyn
12/04/2025, 02:01:44 AM

From a maintenance perspective, the Honda Vezel's cabin air filter is located behind the glove box. Access for replacement can be achieved by opening the glove box and handling the fixing points. I recommend replacing it every 12 months in dusty areas to prevent airflow blockage. A dirty filter not only reduces airflow but may also harbor bacteria, which is harmful to health. This user-friendly location is more convenient than engine-compartment designs in some other models.

Was this review help?
17
Share
Expand All
DiMatteo
01/24/2026, 03:24:57 AM

For safety and health considerations, the Honda Vezel's cabin air filter is located behind the glove compartment on the passenger side. Replacement frequency should be every 6-12 months to prevent dust and germs from causing allergies that may affect driving concentration. The operation is simple - just open the compartment and remove the clips to install a new one. I maintain regular replacement to ensure clean airflow and comfortable breathing. The filters are inexpensive, and DIY replacement saves hassle. Always check that the cover seals properly to prevent external particles from entering the system. This small maintenance task protects health and ensures safer driving - don't neglect it.

Was this review help?
18
Share
Expand All
MacEmily
04/20/2026, 02:25:44 AM

Novice Honda Vezel owners looking for the cabin air filter can find it easily behind the glove box. First, open the glove compartment, then release the side clips or unscrew the fasteners to remove the box. The filter housing is located underneath – open it, replace with a new filter (pay attention to the airflow direction arrow to avoid incorrect installation). If it's your first time, proceed slowly and consult the manual or instructional videos. Replace every 15,000 km or annually to maintain clean, fresh cabin air (especially useful if odors develop). DIY replacement builds skills, saves money, and is straightforward.

Was this review help?
3
Share
Expand All
More Q&A

Can the Engine Start with Cylinder Seizure?

Engine cannot start with cylinder seizure. Here are the details about engine cylinder seizure: 1. Cause: The clearance between the piston and cylinder is too small. During the friction process between the piston and cylinder, the lack of oil film due to insufficient clearance causes surface friction, leading to cylinder seizure. 2. Consequences: A major engine overhaul is required to ensure normal operation and driving safety. When cylinder seizure occurs, the car may experience a rolling sensation, accompanied by loud engine noise and reduced RPM. Additionally, cylinder seizure indicates engine bearing seizure, where increased friction between engine parts and lack of lubrication can cause severe oil leakage.
116
Share

How to Connect CarPlay in Passat?

If the vehicle supports connecting to the CarPlay system via a USB cable. First, turn on the Bluetooth on the central control screen, then go to Settings > General > CarPlay on your phone. The owner can control CarPlay through Siri. Tap and hold the CarPlay button on the CarPlay dashboard.
116
Share

How to Choose Between Borui and Xingrui?

Following the principle of choosing the newer model over the older one, opt for Xingrui. The reasons for choosing Xingrui are as follows: 1. Engine: Xingrui is more powerful, featuring the same Volvo 2.0TD engine as the S90 T4, delivering 190 horsepower and 300 N·m of torque, available for just 110,000 RMB. 2. Chassis Architecture: Xingrui is superior, utilizing the CMA modular architecture, which surpasses Borui's KC platform in terms of electronic and electrical architecture bus and chassis structure technology. 3. Smart Technology: Xingrui offers higher playability as the first fuel vehicle supporting FOTA, allowing for future upgrades via FOTA, similar to smartphones, ensuring more advanced and abundant features in the future.
105
Share

What is the BYD Dirac sound system?

It is a sound system jointly developed by BYD Auto and Dirac Research, utilizing Dirac Live spatial sound field correction technology. This sound system fully optimizes the audio system, delivering excellent in-car audio-visual effects. The first model to feature this system is the all-new BYD Tang. More details about the BYD Tang are as follows: 1. Introduction one: The BYD Tang is a mid-size SUV model, which belongs to the new energy vehicle category. 2. Introduction two: There are six models available for sale, all being 2021 versions, and the vehicle is a 5-door, 7-seat SUV model.
110
Share

What are the differences between the BMW 325 and 525?

BMW 325 and BMW 525 differ in the following aspects: exterior dimensions, maximum torque, and wheel specifications. Below are the detailed specifications: 1. Different exterior dimensions: (1) BMW 325: Length × Width × Height 4719 × 1827 × 1459mm. (2) BMW 525: Length × Width × Height 5087 × 1868 × 1500mm. 2. Different maximum torque: (1) BMW 325: Maximum torque is 300 Nm. (2) BMW 525: Maximum torque is 290 Nm. 3. Different wheel specifications: (1) BMW 325: Equipped with 225/45R18 wheels. (2) BMW 525: Equipped with 245/45R18 wheels.
110
Share

What Causes the Clicking Sound After Engine Shutdown?

It is normal to hear a clicking sound after the car is turned off, and there is no need to worry too much. Here is the relevant information: 1. Most likely cause: The clicking sound occurs because the engine temperature rises correspondingly after sustained high RPM, making the engine very hot. When the car is parked, the cylinder block cools unevenly, causing the metal joints to contract due to cooling. The clicking sound is the friction between the metal parts, which is especially noticeable in older vehicles. 2. Solution: If the clicking sound does not occur when the engine is turned off after idling for a while, it indicates that the sound is caused by friction between some metal components in the engine due to cooling contraction. For turbocharged engines, it could also be the sound of the turbo cooling, which is the sound of metal expanding and contracting with heat.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.