How to reset the tire pressure warning light on a Haval M6?
2 Answers
Methods to reset the tire pressure warning light on a Haval M6: 1. Disconnect the negative terminal of the battery for more than one minute and then reconnect it. At this time, the trip odometer will reset to zero, the tire pressure of all four wheels will display only a horizontal line instead of numbers, and the yellow warning light on the left speedometer will stop flashing. 2. Drive approximately one kilometer, and the tire pressure values of all four wheels will reappear and return to their previous normal state. The Haval M6 is a compact SUV under the Great Wall Motors brand. Taking the 2021 Haval M6 PLUS 1.5T Manual Elite Smart Connect version as an example, its dimensions are 4664mm in length, 1830mm in width, and 1729mm in height, with a wheelbase of 2680mm. The body adopts a 5-door, 5-seat configuration, with a fuel tank capacity of 55 liters and a curb weight of 1500kg.
When dealing with the tire pressure warning light issue on the Haval M6, I always recall that long-distance trip when the light came on and I immediately pulled over to check the tire pressure. All tire pressures need to be adjusted to the recommended values on the door frame label, usually around 230 kPa. If the pressure is too low or too high, it will trigger the warning light. If the light remains on after adjustment, you need to reset the tire pressure system. The operation on the Haval M6 is quite simple: start the car in the ON position without igniting, then locate the TPMS button near the steering wheel and hold it for 5 seconds until the light goes off. Remember, maintaining proper tire pressure is crucial; otherwise, high-speed driving can easily lead to loss of control. I recommend checking the tire pressure once a month with a simple tire pressure gauge. Developing this habit can help avoid troubles, save fuel, and extend tire life. Regular maintenance is more reliable than temporary fixes, ensuring a safer driving experience.
