···
Log in / Register

Can the Rear Seats of the Haval H9 Be Folded Flat?

6Answers
RonanFitz
07/29/2025, 08:58:14 AM

The rear seats of the Haval H9 cannot be folded flat. Here are some additional details: 1. The Haval H9 is Haval's first high-end off-road SUV, featuring a non-load-bearing pure off-road body design with a bold and rugged appearance and an upgraded luxurious interior. 2. It has undergone comprehensive upgrades in off-road performance, intelligent technology, comfort, and safety. 3. It is equipped with high-end features such as three differential locks, CCO low-speed off-road cruise, TAB tank turn, L2-level autonomous driving assistance, and Bosch 9.3-generation advanced ESP. 4. The new Haval H9 offers both large five-seat and compact five-seat models. The large five-seat model is described as follows: it adopts a 4+1 luxury business seat layout. 5. Panoramic sunroof; a new panoramic sunroof has been added, featuring multiple intelligent functions such as automatic window closing at speeds of 120 km/h, anti-pinch, and rain-sensing automatic window closing, enhancing technological convenience.

Was this review help?
105
Share
VonHazel
08/13/2025, 10:00:57 PM

Last time I went camping in my friend's Haval H9, I tried this feature. The rear seats can indeed be folded almost completely flat. First, fold the seatbacks forward, then lift and stow the seat cushions to form a large flat surface. Actual measurements show a depth of about 1.8 meters, so even tall people won't have their feet hanging off. However, there are some minor bumps in the middle. I bought a specialized inflatable trunk mat from JD.com to lay over it, which made it perfectly flat. The most practical aspect of this design is being able to lie down and rest at service areas during long road trips or when transporting large items like construction materials. Just remember to empty the rear storage compartments before folding the seats down, or they might get stuck.

Was this review help?
16
Share
Expand All
DeElijah
10/09/2025, 02:58:17 AM

As an SUV enthusiast, I've researched the rear space of the Haval H9. Its second-row seats support proportional folding, and the backrest can be completely flattened to level with the cargo area floor. I measured the 2023 gasoline version myself - when folded down, it achieves a maximum length of 189cm and maximum width of 142cm, easily accommodating two adults lying down. However, note that the seat hinge area protrudes slightly by about 0.5cm, so laying a blanket is recommended for added comfort. Operation is simple too - just pull the strap at the seat shoulder (even female owners can do it single-handed). This feature proves particularly useful when loading strollers or snowboards.

Was this review help?
20
Share
Expand All
JanelleAnn
11/22/2025, 03:13:49 AM

Last week, I experienced the trunk functionality of the H9. When the rear seats are folded down, they are almost completely flat, with the backrest reclining close to 180 degrees, forming a continuous plane with the trunk floor. However, the folded seat cushions are slightly about 2cm higher than the trunk floor, so strictly speaking, it's not an absolutely flat surface. I easily fit a 2-meter PVC pipe inside. A reminder: remember to lower the headrests to their lowest position first, otherwise they may press against the front seats. The five-seater version is flatter than the seven-seater version, but the seven-seater version has a step after folding down the third row.

Was this review help?
18
Share
Expand All
LeLola
01/12/2026, 10:02:00 PM

My H9 has been in use for three years, and I fold down the rear seats at least once a month for cargo transport. The operation is very simple: first, pull the buckle under the seat cushion to lift it, then pull the lever at the shoulder of the backrest to fold it down. The whole process takes just 20 seconds. When fully flattened, the depth is 1.85 meters, enough for two adults to sleep, though there are two 1 cm high seams. Taobao sells specialized folding bed boards that can level out the seams. It's recommended to spray some WD40 antifreeze into the seat seams in winter, as some northern car owners have experienced jamming. This feature is incredibly useful for long trips, far superior to sedans.

Was this review help?
2
Share
Expand All
SanGraham
04/09/2026, 01:37:06 AM

Just helped my cousin test his new H9 yesterday, and the rear seat folding effect was better than expected. The seats feature a two-stage folding design - first flip the cushion, then recline the backrest, leaving about 3 degrees from a completely flat surface. The most impressive part is the hidden trunk compartment design - lifting the floor reveals concealed storage space perfect for an inflatable mattress. Our actual measurement shows loading capacity: easily fits three 28-inch suitcases vertically, and can accommodate a 2-meter surfboard diagonally. Note that the rear seat belt buckles protrude slightly, so silicone protectors are recommended. This design is particularly suitable for fishing and camping scenarios.

Was this review help?
14
Share
Expand All
More Q&A

What is the mat under the car floor mat?

Under the car floor mat is the floor insulation. Below are the specific functions of car floor mats: 1. Maintaining interior cleanliness: The role of car floor mats is similar to that of household floor mats, helping to keep the vehicle floor clean. 2. Comfort: The comfort of car floor mats is reflected in two aspects: first, they provide some thermal insulation, and second, they absorb vibrations. Whether for front or rear-engine vehicles, car floor mats can somewhat reduce the heat generated by the engine. They also significantly dampen vibrations from the vehicle's movement on the road. 3. Sound insulation: Car floor mats have a certain soundproofing effect. Noise from the vehicle floor passes through the mats before entering the cabin, and these noises are absorbed and weakened by the mats, achieving a soundproofing effect.
110
Share

What to Do When Cadillac Anti-Theft System Prevents Engine Start?

Cadillac anti-theft engine start prevention solutions: It is best to call for a tow truck because general repair shops cannot resolve the issue as they do not know the vehicle's anti-theft deactivation code. Therefore, it is advisable to have it handled at a 4S dealership where specialized tools will be used to reset the anti-theft system. Below is an introduction to the anti-theft prevention system: 1. Basic principle: It locks the car's engine, electrical circuits, and fuel system, preventing the vehicle from starting without a chipped key. The anti-theft system locking up is a common malfunction of car anti-theft locks. 2. Basic components: The car anti-theft system is designed to prevent theft of the vehicle itself or items inside. It consists of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators.
117
Share

Is a tire pressure of 2.8 considered normal?

A tire pressure of 2.8 is not normal. The standard tire pressure range is between 2.3 and 2.5 bar. The effects of excessive tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Steering wheel vibration and deviation, reducing driving comfort; 3. Accelerated wear on the central tread pattern of the tire, shortening tire lifespan; 4. Increased body vibration, indirectly affecting the lifespan of other components; 5. Excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; 6. Decreased tire pressure resistance, leading to internal cracks and blowouts.
112
Share

What are the distances for viewing the rear car in the right side mirror?

When the rear car occupies 1/3 of the area in the right side mirror, the distance is approximately 15 meters. When the rear car occupies half of the right side mirror, the distance is about 10 meters. When the rear car occupies half of the right side mirror, this indicates the rear car is very close, and it is not advisable to perform turning maneuvers. Function of rearview mirrors: The rearview mirror is one of the important safety components of a motor vehicle's body, used to observe the road conditions behind the car during reversing and to monitor the surroundings while driving. For the convenience of the driver and to prevent traffic safety accidents, ensuring personal safety, all countries mandate that vehicles must be equipped with rearview mirrors, and all mirrors must be adjustable in direction. Classification of rearview mirrors: There are mainly two types of rearview mirrors in vehicles: one is a flat mirror, which, as the name suggests, has a flat surface, similar to typical household mirrors, providing an image the same size as seen by the naked eye. This type of flat mirror is commonly used as the interior rearview mirror. The other type is a convex mirror, which has a spherical surface with varying radii of curvature. Its image is smaller than what the naked eye sees but offers a wider field of view, functioning like a camera's "wide-angle lens." This type of convex mirror is commonly used as the exterior rearview mirror and the lower rearview mirror.
109
Share

What are the differences between Continental MC5 and TC6?

The differences between Continental MC5 and TC6 are as follows: 1. Different main performance: Continental MC5 focuses on the handling and stability performance of the tire; Continental TC6 focuses on quiet performance and grip, and is a product developed for uneven road conditions. 2. Different patterns: Continental MC5 adopts an asymmetric pattern; Continental TC6 adopts a diamond chamfer pattern. 3. Different advantages: Continental MC5 allows the vehicle to get closer to the ground more effectively during driving, improving the tire's grip, and the rigidity of the inner fine pattern blocks is relatively low, which can effectively reduce the noise generated when the pattern blocks collide with the road; Continental TC6 has excellent handling performance at high speeds, ensuring even force distribution on the tire contact surface during turns, and high-speed stability.
104
Share

How to Shift from First Gear to Second Gear in a Car?

To shift from first gear to second gear in a car, the method is as follows: After a smooth start, lightly press the accelerator, then release the accelerator and depress the clutch. Shift into second gear, gently release the clutch, and lightly press the accelerator again. Generally, when starting a motor vehicle, it is necessary to use first gear, or when climbing a steep slope. After a normal start and reaching a speed of 5 to 10 kilometers per hour or more, you can shift into second gear during the gap between pressing and releasing the accelerator. A manual transmission (MT), also known as a manual gearbox, requires the driver to manually move the gear lever to change the gear meshing device inside the transmission, altering the gear ratio to achieve speed changes. An automatic transmission typically refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load while driving.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.