How to Reset the Tire Pressure Monitoring System on the Mazda3 Axela?

1 Answers
VanReed
07/30/25 7:08am
The method to reset the tire pressure monitoring system on the Mazda3 Axela is as follows: 1. Turn on the ignition switch; 2. Press and hold the Gage button on the right side of the driver information center until the screen on the instrument cluster displays the tire pressure monitoring system; 3. Press the arrowed setting/reset button until the message 'Tire Pressure Monitoring System Reset' appears. The Mazda3 Axela is a compact car launched by Changan Mazda, with dimensions of 4662mm in length, 1797mm in width, and 1445mm in height, and a wheelbase of 2726mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 86kw, and is paired with either a 6-speed manual or a 6-speed automatic transmission.
Was this review help?
9
4
Share
More Forum Discussions

Does keeping the automatic parking in D gear damage the car?

Keeping the automatic parking in D gear can damage the car. When the automatic parking is engaged in D gear, the engine remains in an idle state. If this condition persists for an extended period, the temperature of the transmission will continuously rise, which can easily cause the transmission fluid to deteriorate, accelerate transmission wear, and reduce its service life. More details are as follows: Usage of automatic parking: Automatic parking relies on the intelligent braking system and can only be used in vehicles equipped with brake control systems such as ESP. Automatic braking function: The automatic parking function can be understood as an automatic braking feature, which is very convenient to use. Once activated, simply pressing the brake pedal will engage the parking brake, preventing the vehicle from rolling. In this state, there is no need to change the gear, enhancing parking safety.
7
5
Share

Is It Mandatory to Have a Passenger in the Carpool Lane?

Yes, it is mandatory to have a passenger in the carpool lane. 1. Introduction: The carpool lane has time restrictions. Generally, the number of passengers in the vehicle is only restricted during peak hours in the morning and evening. At other times, drivers using this lane need not worry, as they will not be penalized even if there is only one person in the car. 2. Regulations: The purpose of setting up carpool lanes is to encourage ride-sharing, reduce the number of vehicles on the road, lower carbon emissions, and protect the environment. Only vehicles with fewer than nine seats are allowed to use this lane. Additionally, solo drivers are not permitted to use the lane, and children under the age of twelve cannot sit in the front passenger seat, otherwise, they will face penalties if caught.
6
2
Share

Does a car tire need to be replaced if the outer layer is slightly damaged?

It needs to be replaced. If the tire's outer layer is scraped off, it usually occurs on the sidewall, which is the thinnest part of the tire. However, during driving, the sidewall undergoes the most compression and deformation, bearing significant loads. Therefore, regardless of the tire type, if there are scratches or damage on the sidewall, both tire manufacturers and car manufacturers clearly stipulate that the tire must be replaced if the sidewall is damaged or cannot be repaired due to air leakage. Below are the reasons why a car tire needs to be replaced if the outer layer is slightly damaged: Based on the tire's structure, the sidewall is the weakest part, consisting only of a thin rubber layer and the cord ply, which is a mesh layer woven from cotton threads and rayon. This fragile sidewall bears the air pressure that supports the entire vehicle's weight. If the sidewall is cut, especially if the cord ply is damaged, it completely disrupts the structural stress of the sidewall, making it highly prone to blowouts. Therefore, if the tire sidewall has a scrape but the cords are not exposed, you should still go to a repair facility to replace the tire as soon as possible. If the cords are exposed, drive carefully, avoid high speeds, and immediately go to a repair facility to replace the tire.
19
4
Share

Why is the MINI JCW so expensive?

MINI JCW offers excellent performance and high cost-effectiveness. Below is a detailed introduction to the MINI JCW: 1. Powertrain: The new MINI JCW model is equipped with a 2.0-liter four-cylinder turbocharged engine, delivering a maximum power of 228 horsepower (170 kW) and a peak torque of 320 Nm. It is paired with either a six-speed manual transmission or a six-speed automatic transmission. The new MINI JCW with the manual transmission accelerates from 0 to 100 km/h in 6.3 seconds, while the automatic transmission variant achieves the same in 6.1 seconds. 2. Features: The new model comes standard with 17-inch alloy wheels, large Brembo brake discs, an electronic differential, and other configurations, ensuring outstanding sports performance.
5
5
Share

What is the fuel tank capacity of the Buick Excelle?

2021 Buick Excelle has a total of 4 models, all with a fuel tank capacity of 44 liters. The 2021 Buick Excelle is equipped with either a 1.3-liter turbocharged engine or a 1.5-liter naturally aspirated engine, with an automatic transmission (AT), and all models feature front-wheel drive. In the same class, the 2022 Nissan Sylphy Classic 1.6XE manual comfort version has a fuel tank capacity of 50 liters, and the 2021 Ford Focus Sedan 1.5L manual version has a fuel tank capacity of 53 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is the volume from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is designed to ensure that the fuel in the tank can expand when the temperature rises without overflowing the tank's safety space. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may be larger than the calibrated tank capacity. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.
11
2
Share

What is the difference between sweeping the line and crossing the line?

Crossing the line refers to a vehicle's wheels running over traffic marking lines while driving, whereas sweeping the line means the wheels go beyond the traffic marking lines. Below is relevant information about road traffic signs and markings: 1. Introduction: Road traffic signs and markings are traffic facilities set up on roads using specified graphics, symbols, text, lines, vertical markings, raised pavement markers, etc., to indicate specific management content and behavioral rules. 2. Classification: Road traffic signs are divided into two main categories: primary signs and auxiliary signs; road traffic markings can be categorized by their setup into longitudinal markings, transverse markings, and other markings. Road traffic markings can also be classified by function into indicative markings, prohibitive markings, and warning markings.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.