How to reset the tire pressure light on Roewe 360?

[KeiraMarie]

The method to reset the tire pressure light on the Roewe 360 is: Store the tire pressure status through the tire pressure option in the multifunction menu. There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, which indicates the light has been reset. The Roewe 360 is a compact car under SAIC Roewe, with dimensions of 4579mm in length, 1804mm in width, and 1490mm in height, and a wheelbase of 2660mm. The car comes standard with LED daytime running lights, an 8-inch high-definition touch capacitive screen, a rearview camera system, leather seats, a 14-key multifunction steering wheel, and other high-spec configurations.

[LaneAnn]

Last time I drove my Roewe 360, the tire pressure warning light came on, which was quite annoying. As someone who's been driving for years, I must remind you to first check if all tire pressures are normal—usually around 2.4 bar—don't be careless about this. After checking, locate the tire pressure reset button, it's a small button on the left side of the steering wheel. What I do is turn on the ignition without starting the engine, then press and hold the button for 5 to 10 seconds until the dashboard light goes off. If the light doesn't turn off, it might mean a sensor is broken or there's another issue, so it's best to visit a 4S shop immediately. Remember to develop the habit of checking tire pressure at least once a month—this helps avoid increased fuel consumption and ensures driving safety. Especially before long trips, pay extra attention—don't wait until the warning light comes on to panic.

[Janet]

I just fixed the tire pressure warning light issue on my Roewe 360 the other day. As a DIY car owner, I found it pretty straightforward. First, make sure all tires are inflated to the recommended pressure in the manual, usually around 2.3 to 2.5 bar. Then, get in the car, start the engine but don't drive, and locate the small button marked with the tire pressure symbol on the left control panel. Hold it down for a few seconds until the light goes off. If you're stuck, just pull up a video tutorial on your phone - there are plenty online. Also, if the light stays on, don't rush to reset it. There might be a slow leak - I found mine using a tire pressure gauge and fixed it with a simple patch. Saves money, hassle, and prevents blowout risks.

[VanMatthew]

When I drive my Roewe 360, the tire pressure warning light keeps coming on, which is quite dangerous. First, I need to check if the tire pressures are consistent and maintain them between 2.2 to 2.4 bar. Resetting is simple: start the car, find the reset button near the steering wheel, hold it for 5 seconds to see if the light goes off. If it still doesn't work, don't force it; go for a check-up immediately to avoid tire issues affecting handling. Safety first—I regularly check the tire pressure to reduce how often the light comes on.

[ClaytonLee]

As someone with some knowledge about cars, I know that the Roewe 360's tire pressure system relies on sensors for detection. When the light comes on, first check if the tire pressure meets the standard, then use the reset button to let the system relearn. The button is usually near the steering column, press and hold it for 5 seconds. If the light doesn't go off, it might be due to a dead battery or an aging sensor, which needs replacement. Remember to have the sensors checked during annual maintenance to save both trouble and money.