How to Reset the Service Wrench on Renault?

How often should the Corolla's engine oil be changed?

Toyota Corolla new cars mostly default to using Toyota Genuine 0W-20 full synthetic oil, which only needs to be changed once a year or every 10,000 kilometers. Synthetic oil has a wider temperature range for use, a longer service life, and a higher cost; for the same oil film requirements, synthetic oil can achieve this with a lower viscosity. Additional information: 1. Toyota officially recommends using 0W-20, 5W-20, 5W-30, and 10W-30 grade oils for the Corolla. The 0W in 0W-20 indicates the oil's cold-start performance. Using oil with a lower number before the W makes it easier to start the engine in cold weather. The 20 in 0W-20 represents the oil's viscosity characteristics at high temperatures. Higher viscosity oils (with higher values) may be more suitable for high-speed driving or heavy-load vehicles. 2. When selecting the viscosity grade, generally, 5W is sufficient for most regions in winter, while some northern areas (such as Harbin) are better off using 0W for better low-temperature fluidity to adapt to the driving environment temperature. For high-temperature viscosity, a lubricant with a viscosity value of 20 is typically used. However, if driving frequently in congested areas, for older vehicles, or for long-distance heavy-load transportation, the lubricant viscosity can be appropriately increased, such as using 0W-30 oil.

6

0

Share

What is ECO for?

ECO is the car's economic driving mode, also known as the economy mode. When the vehicle frequently travels in congested urban road conditions, turning on the ECO mode has a good fuel-saving effect. Under the operation of the ECO mode, the engine carbon deposits are basically similar to those produced under normal operating conditions. The main principle of the ECO mode is not complicated. It mainly involves making comprehensive judgments and analyses during the vehicle's movement regarding factors that affect fuel consumption, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the appropriate amount of fuel to provide to the engine for operation, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with reasonable gears to reduce unnecessary fuel consumption. ECO is an abbreviation, with the Chinese translation being Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The ECO mode is also divided into active ECO driving mode and non-active ECO driving mode. When the ECO indicator light on the dashboard lights up, it means the vehicle's economy mode has been activated. The ECO mode is divided into active and non-active types, with the difference being that the active type has its own button, allowing the driver to choose whether to turn it on. When the driver presses the ECO mode switch, the dashboard indicator light immediately lights up, and the vehicle automatically begins to adjust settings, such as throttle opening, transmission shift logic, and air conditioning output power. The non-active ECO mode does not have a dedicated button. When the dashboard ECO indicator light comes on, it is only a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most cars use the active ECO driving mode, which means they have their own switch button. Therefore, the ECO mode can be turned on during daily driving, except when the speed exceeds 120 km/h, during idle parking, in N/P gear, or manual mode, especially when climbing a hill. There is no need to turn on the ECO mode in these situations, as it would not reflect the economic and fuel-saving characteristics of ECO and could even affect power. In addition, the ECO mode usually fails under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car will consider the speed, and the ECO mode automatically deactivates. During idle parking or in N/P gear and manual mode, the ECO mode may also fail. When high torque output is required, such as when climbing a hill, the engine computer will prioritize ensuring sufficient power to drive the vehicle, and the ECO mode will not work either.

12

3

Share

How to Break in a New Car with Tiptronic Transmission?

Here are the methods for breaking in a new car with tiptronic transmission: 1. Warm up the car before starting: After the car has been parked overnight, the engine oil flows back into the oil pan. When the car is started, the oil lubricates all parts of the engine from the oil pan. If you start driving immediately, the internal components of the engine may not be fully lubricated, leading to abnormal wear. 2. Speed control during the break-in period: The speed during the break-in period should be increased gradually. For the first 500 kilometers, try to maintain a speed of 60-70 km/h, with the engine RPM not exceeding 2,200. From 500 to 1,000 kilometers, the speed can be increased to 90-100 km/h, with the RPM generally kept below 2,500. After 1,000 kilometers, the speed can be increased to below 120 km/h, with the RPM not exceeding 3,000. 3. Gear control: During the break-in period, it's important to control the gear shifts properly with a tiptronic transmission. Avoid suddenly shifting into P or R gear while driving, as this can cause severe impact to the transmission and may even damage it. When shifting into reverse, make sure the car is completely stopped. Additionally, practice using the manual mode on smoother roads to break it in. 4. Avoid coasting in N gear: While driving, do not coast in N gear. When in N gear, the transmission's power pump stops working, leading to insufficient cooling and lubrication, which can cause abnormal wear and shorten the transmission's lifespan, as well as increase fuel consumption. 5. Avoid emergency braking: Try to avoid emergency braking during the break-in period. Emergency braking can impact the car's braking system. Since the car's components are not fully broken in, frequent emergency braking can hinder the break-in process and damage the chassis. 6. Generally, do not change the engine oil prematurely: The oil used during the break-in period is usually a specialized lubricant with low viscosity, excellent heat dissipation, cleaning, and antioxidant properties. Some oils even contain additives that aid in the break-in process. Changing the oil too early may hinder the break-in.

10

4

Share

What causes the ABS light to come on after wading through water?

There are various states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by mud, sludge, or other contaminants, affecting the sensor's ability to detect the corresponding wheel speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay lead to signal issues, causing system failure. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As engine speed increases, the voltage rises, and the ABS light turns off. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS control unit malfunction. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check for enlarged gaps in connectors; replace the ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap label. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the brake pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

18

2

Share

What Needs to Be Done for the First Car Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance service provider for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific time varies by vehicle, generally after driving 3,000~5,000 kilometers or about half a year. It is essential to attend the first maintenance on time, neither in advance nor delayed. The completion of the first maintenance indicates that the car's break-in period has ended, and the vehicle can now be driven according to standard load and normal speed requirements. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first is the standard. First maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most critical aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior of the car body should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush and wash with detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry but will flow through these holes to areas like the transmission, causing erosion and corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and add the same brand from the start. Different brands of antifreeze have vastly different chemical properties. The corrosion inhibitors in various antifreeze brands can corrode each other. Since different brands use different corrosion inhibitors, they should not be mixed to avoid unnecessary trouble. Do not lubricate wheel bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to wheel bolts and nuts to prevent rust, but this poses a risk to safe driving. At high speeds, bolts and nuts can easily loosen or even fall off, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI (Electronic Fuel Injection) car differs from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

13

0

Share

How Long Does the First Maintenance for a Car Take?

The first maintenance for a car typically takes 30 to 40 minutes. The initial service only requires changing the engine oil and oil filter, followed by an inspection of other components. Generally, the first maintenance for a car should be done within 3 to 5 months or after driving 3,000 to 5,000 kilometers, with some vehicles extending up to 8,000 kilometers. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Modern car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more.

5

4

Share

How to Reset the Service Wrench on Renault?

How often should the Corolla's engine oil be changed?

What is ECO for?

How to Break in a New Car with Tiptronic Transmission?

What causes the ABS light to come on after wading through water?

What Needs to Be Done for the First Car Maintenance?

How Long Does the First Maintenance for a Car Take?

How many cylinders does a Toyota Corolla have?

What are the requirements for motorcycle registration in Wuxi?

Has the Crown Been Discontinued?

What engine does the Volvo C30 use?