How to reset the one-button start maintenance reminder for Geely Vision S1?

1 Answers
LaJustin
07/30/25 5:33am
Turn off the ignition switch, press the left-right directional button on the right side of the multifunction steering wheel, then press the one-button start to power on the vehicle. After five seconds, release the button, and the dashboard will display a reset prompt. Press and hold the SET button for more than five seconds, then press the MODE button, and finally turn off the vehicle. Below is some relevant information about the Geely Vision S1: 1. Introduction to the Geely Vision S1: The Geely Vision S1 is the second strategic model from Geely Auto in the crossover SUV market. 2. Core values: The letter "S" in the name Geely Vision S1 represents the five core values of the product: Sharp (stylish design), Smart (convenient connectivity), Safe (comprehensive protection), Satisfying (comfortable experience), and Sporty (dynamic driving pleasure).
Was this review help?
11
5
Share
More Forum Discussions

What Are the Reasons for a Push-to-Start Car Not Starting?

The reasons for a push-to-start car not starting include: 1. The smart key battery is dead, making it difficult for the in-car sensor to detect it; 2. The gear is not in the P position; 3. The steering wheel is locked; 4. Insufficient or damaged battery voltage; 5. The car is out of fuel; 6. Engine starting system failure. Before starting a push-to-start car, ensure the gear is reset, then press and hold the start button while depressing the clutch. The push-to-start system is part of a smart car, serving as a button device to simplify the starting process and also to turn off the engine. This device can be retrofitted in place of the original key lock or as an independent panel.
14
5
Share

What is the function of a car seat belt?

Car seat belt functions: To reduce the likelihood of death or serious injury in traffic collisions by minimizing the secondary impact force that poses internal collision risks, to ensure the maximum effectiveness of airbags by properly positioning occupants, and to prevent occupants from being ejected from the vehicle or experiencing vehicle rollover during a collision. The following details about seat belts: 1. Definition of seat belts: A seat belt is a vehicle safety device designed to protect vehicle occupants from harmful movements that may occur during a collision or sudden stop. 2. Relevant regulations: Traffic police on duty can impose fines on passengers who do not wear seat belts in the front passenger seat. According to the Road Traffic Safety Law, passengers in the front passenger seat must also wear seat belts while the vehicle is in motion.
12
4
Share

Does slight water ingress in the air filter have any impact?

If the air filter has slight water ingress, it may cause "hydrolock" phenomenon, thereby accelerating engine wear. Below is relevant information about air filters: 1. Concept: An air filter is a type of filter, also known as an air filter cartridge, air cleaner, or air element. 2. Disadvantages: There is always a trade-off between air intake volume and filtration efficiency. With in-depth research on air filters, the requirements for them have become increasingly stringent. Some new types of air filters have emerged, such as fiber filter element air cleaners, composite filter material air cleaners, noise-reducing air cleaners, and constant-temperature air cleaners, to meet the operational needs of engines.
17
2
Share

What to Do When the Left Side is Narrow and the Right Side is Wide While Reversing into the Garage?

If the left side is narrow and the right side is wide while reversing into the garage, correct it by turning the steering wheel to the right. If the left side is wide and the right side is narrow while reversing, correct it by turning the steering wheel to the left. In short, turn the steering wheel towards the wider side to adjust. Here is additional information: 1. Reversing into the Garage: Reversing into the garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into the garage is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Subject 2 Test Content: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviation for the field driving skills test, which includes five mandatory test items: reversing into the garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves.
11
0
Share

What are the symptoms of a faulty transmission solenoid valve in the Hyundai Elantra?

Faulty transmission solenoid valve in the Hyundai Elantra may cause symptoms such as gear shifting hesitation, inability to shift gears, or failure to move when shifted into D gear. Below are the relevant introductions: 1. Dual-clutch transmission: It is a product developed based on manual transmission. Its structure is similar to that of a manual transmission, but it has an additional set of clutch and gear-shifting control mechanism. 2. CVT transmission: It is an automatic transmission with a relatively simple internal structure, consisting of only two cone pulleys and a steel belt. The steel belt can move on the cone pulleys, allowing the transmission to change speed and torque. 3. AT transmission: It is an automatic transmission with a more complex internal structure, containing many planetary gears. The AT transmission relies on planetary gears to change speed and torque. It is connected to the engine through a torque converter, resulting in smoother gear shifts.
16
2
Share

Reverse Parking Skills?

Here are the summarized techniques: 1. Determine the parking space position: Assess whether the space is "suitable". If acceptable, approach it slightly. When the front wheels pass the space, start steering to make the car move away from the space. 2. Utilize the lane width and observe mirrors: Maximize the available lane width to position the car at an "angle". This reduces the angle between the car and the parking space, minimizing steering adjustments during reversing. The angled position also allows the driver to monitor two rear danger points via mirrors. When the car is angled enough for the driver to see the corner of the left-side vehicle in the left mirror, begin reversing. Continuously check the left mirror to monitor the distance between the left rear wheel and adjacent vehicles - the first "danger point". 3. Monitor the rear: Once your left rear wheel clears the front of the left-side vehicle, the "danger point" shifts to the right rear corner. Shift focus to the right mirror to assess clearance from the right-side vehicle. When a "gap" appears between your car and both side vehicles in the right mirror, you've successfully passed all danger points. Continue steering to adjust the reversing path and straighten into the space.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.